I just installed the opensuse 11.2 64 bit version on my gateway md2614u.I am having sound problems. There is no sound for the internet (..... was the test) and the amarok audio will not play any mp3 files. The only sound that I can hear is the initial start up noise. Other than that there is no sound.
View 5 Replies
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
In case you don't already know, I'm running 11.4 x64 with GNOME. I had a realization recently that my computer doesn't make any login or logoff sounds. After some investigation, I've found there are two problems:
1) The command for the login sound defaults to a sound that doesn't exist; the id is "desktop- login", but no desktop-login.oga exists in /usr/share/sounds/freedesktop/stereo. There does exist service-login.oga, however.
2) Even with explicitly setting the path on canberra-gtk-play, no sound plays. The command hangs for a couple seconds and produces no errors, suggesting that it does find the sound, but nothing comes out of the speakers.
I'm not terribly desperate to get login sounds working, but I am confused about why this wouldn't work out of the box.
I can't use the touch pad in my laptop for clicking in the touch surface at the login screen. (and not the buttons) This was even a case in my desktop. but i solved it by choosing enable touchpad click option from control centre > mouse preference > touchpad. But how to enable touchpad click at the login screen?
View 2 Replies View RelatedI have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
I find system sounds distracting, so having recently installed F11 I've turned the sound theme to 'no sounds', which is fine. However, when I boot my system and get the GDM login screen, every time the password text input box gets focus, it emits a *really* loud low beep. I have no idea where to begin looking to customise the settings for GDM to disable all sounds.
View 7 Replies View RelatedI'd like to disable the log-in screen sound. Not after you log on. Since it's my laptop I can't just switch a knob or press the off button. The function keys don't work before log-in.. Well not for sound at least.. I guess you could say it's a bug.. unless it was intended. Anyway, without filling a bug report how can I disable sound @ the login screen?
View 2 Replies View RelatedMy OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View RelatedI have the following config:
- Ubuntu 10.04 in dual boot mode with XP
- GNOME & AWN installed
when I tried to disable login sound by unchecking Play login sound under Administration > Login Screen, the login sound is not disabled, is this the correct place to disable login sound or it's a bug?
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
Step 1: Create an audio file in (.ogg) format name (system-ready.ogg).
Step 2: Open nautilus with root privileges by pressing ALT+F2 and typing:
gksudo nautilus
Step 3: Navigate to /usr/share/sounds/ubuntu/stereo/
Step 4: In this directory rename the current (system-ready.ogg) file to (system-ready.ogg.backup)
Step 5: Copy your custom (system-ready.ogg) file into this directory.
Step 6: Restart your computer and enjoy.
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies View RelatedEvery account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies View RelatedThe graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
I'm not referring to "Gnome Login Sound" I'm referring to the login screen sound. Those 2 drum pats you hear when you start up Ubuntu, before logging in. I was using Macbuntu, and have switched back, however it never changed my login sound back to what it was suppose to be. I knew how to change everything else back, so i didn't just run a script with out knowing how to clean up after it, however this is the only thing I don't know how to do. It keeps looking into the macbuntu folder to get the sounds before i log in. Probably being able to simply set the sound theme in the login screen would fix this issue. I've tried using Ubuntu Tweak, but no such luck. If no one can't find a solution I'll just have to use the other folder from now on >.< However I'm quite certain there's a script somewhere, that I can edit. I just need to know where it's at.
View 7 Replies View RelatedI hear no login sound when I login to my ubuntu. I checked at startup applications and found GNOME login sound is enabled. The command used there is
Code:
/usr/bin/canberra-gtk-play --id="desktop-login" --description="GNOME Login"
.
Its not only this, but there is no other sounds enabled - for mouse clicks etc
I have just installed Fedora (13) for the first time. It's great ! So thanks to all its developers !
I managed to do many tweaks I wanted to, in no small part thanks to this forum, but here's one that eludes me and my google-fu.
I'd like to customize the login screen (if I grokked correctly, that's gdm). I already saw how to change the background or how to enable automatic login, but what I'd like to do is this :
1. Disable that rather annoying "pong" sound when I select a user,
2. Set a default desktop environment. Gnome seems to be the default environment selected in the drop-down menu, but me, I'd like for it to be XFCE.
I installed opensuse11.4 few minutes back. The install was absolutely smooth. I have dual boot, Win Xp and 11.4 now. But for some reason I do not see the login screen but instead I see a green screen with squares and stripes. Login in the failsafe mode is successful. How do I fix it?
Also noticed the following,
1) Initially the splash screen picks up the right resolution 1024*768 and then it changes it to a higher resolution. This I think I can fix, because I had faced a similar problem with 11.3 as well.
Graphics Card: GeForce 7025/ nForce 630a.
I am using ubuntu 11.04 32 bit. I tried to use my keyboard, until yesterday it works perfect. But this morning, I can not even login to my own desktop, as I do not see any feedback from the login screen when I type using the keyboard. completely white, nothing shown when I type using the keyboard. I tried different keyboards, it still won't work in the login screen. I tried to type to access bios, it works fine.I managed to remote using ssh, but when I type dmsg, it recognise the keyboard.
View 1 Replies View Relatedi just installed ubuntu server edition 10.10, install said it was successful, but instead of loading a normal login screen it takes me to a screen that says exactly this: Quote: Ubuntu 10.10 computer name ttyl computer name login: Im wondering if this is normal or did the install go wrong somewhere, and not report it and if there is a way to fix it.
View 2 Replies View RelatedI'm on a LG E500-VAP36P, with 3gb RAM, 250 Gb SATA HDD (Kubuntu Hardy kernel 2.6.27-9-generic), and my keyboard and my usb mouse don't work at the login screen. My touchpad works and my keyboard works in command-line session. This is my xorg.conf. I also attach a relevant part of my syslog.
Quote:
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
[code]....
using Kubuntu 10.04. When my computer was being updated sudden power failure forced my system to reboot and in the log in screen I can find that my keyboard and mouse is not working at all. I cannot enter into my system. I tried to enter ctrl+F1 but failed.
View 1 Replies View RelatedI'm using opensuse 11.1 with KDE 3.5.10 "release 21.9" and I cannot hear the login sound (kde startup sound) but I can hear the log off sound and can get sound in any other Linux application including every other kde system sound. I have checked the login sound file IS there and IS playable, i do not understand why the sound works for everything else but not the kde startup sound??
View 4 Replies View RelatedMy last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
I found a tutorial on it, but there is no menu option under system notifications for KDE events.
View 5 Replies View Relatedinstallation opensuse 11.3 and kde 4.4 after update to kde 4.6, work fine, but problem is login screen is low like 640x350...? i wanted to change from lowtion to high 1024x768?when i start opensuse and begin to login was low resolution and log in my user and it's low resolutiona dn i change screen from setting system (kde) after change high display is works fine and rebbot same low resolution for LOGIN MANAGER how i can change it??
View 1 Replies View RelatedHow can i change the login sound at the start of KDE?
View 3 Replies View RelatedI have no loginsound in opensuse 11.3 gnome. and no sound on popup notifications in the right corner
I checked the soundlevels in "sound" no problems what i could see
the "sound" in yast trying to play test sound and that works.
..... etc works.
"notification sound" works when updating system and when attaching battery-charger to laptop works
and on "startup application" is still set to play sounds on login What should be the next step to solve problem ?
first time using this os and i tried to solve and read on the forum but i still dont find whats wrong
I'm running openSUSE 11.4 32-bit. When I login to Gnome there is is no login sound. I was running 11.1 before and whenever I would login to Gnome I would hear a guitar login sound.
View 9 Replies View RelatedThe problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies View Related
