Is it possible to set up an OpenVPN without having to issue keys or certificates.All tutorials I found seem to use them.
I want just a basic username/password approach - I don't care that much about security obviously but is it at all possible?
I have openVPN working with a thirdparty CA, and validating UID entries from the client certificates in LDAP groups. My next step is to figure out OCSP to make sure revoked certificates are denied. I could dump out my CRL as a nightly job, but that of course presents a window where a revoked certificate is still valid. how to dump out client certificate back to pem format? For the ldap check all i was using was the DN, which doesn't really help me for openssl/ocsp
View 5 Replies View RelatedWhy is that certificates need to be revoked with openvpn?I simply removed them from the keys folder but everytime the client connects it just places the certificates back into the keys folder itself?! Should that be possible?
Secondly, I have a problems etting the revoke command.Is there a known setting on the openssl.cnf file that might cause this?
[root@server]# source ./vars
NOTE: If you run ./clean-all, I will be doing a rm -rf on /etc/openvpn/easy-rsa/2.0/keys
[root@server]# ./revoke-full client2
Using configuration from /etc/openvpn/easy-rsa/2.0/openssl.cnf
error on line 282 of config file '/etc/openvpn/easy-rsa/2.0/openssl.cnf'
21368:error:0E065068:configuration file routines:STR_COPY:variable has no value:conf_def.c:629:line 282
code....
i am using red hat5 n i want to create X.509 certificates for ipsec vpn help me in creating certificates, not able 2 create certificates guide me ehere is the location for certificates.
View 1 Replies View RelatedI run a web server on Fedora 12, principally using Apache, MySQL, and PHP. I host a variety of sites, one of which is a family website that contains semi-sensitive personal data for several hundred extended family members, who all have access to the database-driven site.
Until now, I have been using a self-signed SSL certificate to encrypt the data as it is read and written back and forth from my database. Family members have simply had to put up with clicking past certificate warnings as they enter the site, as most browsers flag self-signed certificates as bad. It hasn't really been that much of a bother, but I'd love to do it more professionally. I have looked into buying SSL certificates, but it's a site I host for free and would rather find a cheap or free alternative if possible.
So I'm just fishing for ideas to work with. What are some alternatives to using SSL certificates for moderately strong website encryption? So far, I run only one host on the domain, but may eventually need encryption that would support multiple hosts. Or does anybody know a way to make self-signed certificates work on most popular browsers without being flagged as suspicious?
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
Im a total beginner when it comes cryptography and networking. Finally managed to create a connection with OpenVPN on Ubuntu to a vpn provider called ivacy. On this page:http://ivacy.com/en/doc/user/setup/winxp_openvpn they give configuration files and keys, which I used. The question is, if someone wanted to see my network traffic, could they do it using the keys provided on that page. Reading the OpenVPN documentation i saw that it is also possible to create your own keys. Would that be more secure?
View 10 Replies View RelatedDoes anyone know how to configure an SSL cert with GoDaddy? On the following squid page it seems to use x509 and PEM format for everything. GoDaddy seems want CSR files to issue the cert. The x509 & PEM combo don't seem to generate these CSR files in the correct format. Does anyone know the openssl commands to generate the files and the config line(s) to put in squid.conf?
I started from this wiki: [URL]
I also tried following this godaddy wiki, but it was for apache and not squid [URL]
I am fairly clueless when it comes to open vpn configuration file. Though I should have some understanding to execute the fix if it is available.
I have a ovpn file that is created by my organization (so theoretically there should be nothing wrong with it) containing not only the typical connection information, but also my CA key, certerficate/Public and certificate/Private key. I was able to locate these keys using the standard text editors.
When I follow the procedure to import (Right click on Internet Icon --> Edit Connection --> VPN Tab --> Import) none of my keys were imported (perhaps the import is not complete). I think because of the import failure I was not able to click ok and create the connection.
Is there a method to get around this and get it working? I have been looking for existing solution online but I was not able to find any similar cases with mine.
i have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
I have been trying to set up openVPN on a Virtual Machine running Ubuntu 10.04 with the eventual intention of having a closed VPN in the workspace I'm at, and a bridged internet connection out through the server.My initial process/instinct was to go through Webmin. After a fair bit of tooling around making eys/certificates, I was able to get a response (and that's all it was, really) from my windows machine accessing the VPN server. However, in my attempt to bridge the network, I have lost all internet/networking capabilities from the server.Fortunately I am able to access the server directly from the hardware underneath (i.e. I don't need to SSH in or anything), and so I've been attempting to restore the server's networking back to default. I have returned the /etc/network/interfaces file to it's original state (just the loop, and an eth0 on dhcp) and restarted the networking. A check with ifconfig returns what seems to be a working eth0, and the loop (noting else) however I am unable to ping any outside server. When I do, I am given the message:From XXX.XXX.XXX.XXX icmp_seq=1 Destination Host Unreachable(where of course XXX is my IP address).nother VM on the server is able to access the internet just fine, so it's not the overall server hardware...I guess at this point I'm just trying to take steps back,
View 1 Replies View RelatedI don't know if this is a configuration issue or a hardware issue, but I have a Kinesis Advantage USB keyboard and for some reason the F3-F5 keys aren't responding as they used to. They don't respond to anything and, when I tried using F5 on Emacs, it said <XF86AudioNext> is undefined, so I guess it's a weird mapping problem.
Any idea how I could remap them to the original meaning?
Just wondering if Ubuntu has an Accessibility equivalent for sticky keys and mouse keys.
View 1 Replies View RelatedI have set up OpenVPN for my connection. I'm using this to connect to the internet from different locations using tunnelling.
Right now I have a few IP's : on eth0 I have IP from my ISP, on eth0:1 I have my own IP.I set up MASQUERADE to eth0 - but in this case when I try to access my restricted resources IP address from ISP is visible.
What I want is to use my own IP address from eth0:1 - could somebody help me to build good working redirect entry for that? I want to redirect all connections to that IP assigned on eth0:1... - just to access Internet using my IP.
I'm running Debian (Squeeze) and I have a toshiba portege m700. It has five buttons on the front just under the screen, which are the only ones accessible when you flip the screen over into tablet mode. One of them is for rotating the screen, and another is for switching to external display. I want to remap the remaining three to control, alt and super so that I can use shortcuts with the stylusThe problem is, when I used showkey to find out the key codes, I found out that each button generates more than one key code:Button 1:
key 126 press >> super_r, although this is distinct from the actual super key (125)
key 7 press >> 6
key 7 release
key 126 release
i've set up an openvpn server (with dhcp running on it) and i have to create compatible clients.the problem is how to get an ip by dhcp.with ubuntu i made a script like this
/sbin/ifconfig tap0 up
/sbin/dhclient -e tap0
and everything works fine:tap0 goes up and then start a dhcp request to the server on tap0with fedora there is a nice problem i've noticed that is impossible to run dhclient later on a new interface because i receive this error "dhclient is already running".the tap0 goes up normally but i receive this error when i attempt to get an ip.is there a simple way to get an ip?if i try to kill or restart dhclient when the vpn tunnel is up,all'interfaces lost theirs ip and network goes down crashing my vpn...
Is there anyway you can configure either OpenVPN client or the system to allow connections using OpenVPN to be made to computers on the OpenVPN network using their alias rather than their IP address. This may sound blasphemous but you can in Windows. That is if the VPN network is say 10.x.0.x I could connect to Comp4 or Comp2 using Comp4 or Comp2 not 10.x.0. 4 or 10.x.0.2 or whatever IP is allocated by the OpenVPN server. If the OpenVPN server has not been restarted then it will usually allocate the same IP every time the same client connects.
View 8 Replies View RelatedI installed fedora15, My openvpn didn't connect to my working computer.I checked openvpn configure more time, but still don't connect,
View 11 Replies View Related> sudo apt-get install openvpn bridge-utils
> Reading package lists... Done
> Building dependency tree... Done
> Reading state information... Done
> E: Couldn't find package openvpn
I have access to a VPN I use when having confidential instant messaging sessions. For the purposes of my work, essentially.I'm a command line kind of guy, and like to use Finch (the shell version of Pidgin) for those.However, when I turn on my OpenVPN connection it routes all traffic through the VPN. Web-browsing, IMing, and I can no longer access other machines on my home network.Can I set OpenVPN to only route traffic I ask through that connection (either by port number or application, or some way I haven't thought of), while other traffic flows through my usual home network?Some kind of local proxy perhaps? Or a dd-wrt box set up as a proxy, connected to OpenVPN?I've played around with the GUI environment too (I have a basic GUI I sometimes use on my main machine) and have installed the full desktop 10.10 on a second machine just to see if I can work it out.
View 2 Replies View Relatedi recently rent a VPS and installed with CENTOS 5 64bit, i followed a tutorial to install openVPN to bridge traffic to my windows machine.
View 3 Replies View RelatedMy boss gave me the task (on a very tiny budget) of wanting to connect our remote offices to our network. Solution I came up with is Site-to-Site VPN.
I want to use OpenVPN on the Linksys Routers (again very tiny budget) and have them connect to our Cisco ASA5505 Firewall, but I am running into major problems.
Question is, even though they both use IPSec SSL are they compatible? If not, is there a work sround?
I'd like to configure IPtables to make sure I can only access the internet through an openvpn connection (so when the connection is down I have no way to access the internet but to connect to the vpn again).
I know how to do this with Firestarter (restrictive outgoing policy and I only allow the vpn server IPs) but Firestarter seems to be stupid : for some reason eth0 was changed to eth1 and Firestarter can't work properly anymore, even though that probably can be fixed with Firestarter I'm no more interested in this program and I'd better like to know how to apply the same policy using IPtables.
I've tried a few things already but it failed each time ... how can I effectively allow my computer to connect to the VPN while everything else is blocked ?
I have installed OpenVPN to use it as an internet gateway butcan't get it to work.OpenVPN installed without any problem. The client can also connect and ping the server but there is no internet traffic.I think it is because of a wrong gateway address which the client gets but I'm not sure. server IP address is 10.8.0.1 and the client can ping this IP but it's default gateway is always 10.8.0.5 which is not accessible from the client.This is my server.conf:
Code:
dev tun
proto tcp
[code]...
I'm using OpenVPN to connect to a remote system. When I run
Code:
It brings up a new tunnel interface. The problem is that once the tun interface is brought up and the VPN is established, my whole Internet connection slows to a crawl.
Here is the output from ip route show before openvpn:
Code:
And after openvpn:
Code:
I'm trying to setup OpenVPN to use a third party CA, and its unclear to me how to use the serial and index.txt files that are created when one uses the easy-rsa scripts to setup OpenVPN. If i'm using my own CA can I ignore those? Its also unclear to me how OpenVPN figures out the server.key passphrase. I'd also like to leverage the --tls-verify cmd directive but I am unsure of where to specify it.
What I would like to do is have --tls-verify call a perl script that then verifies that the CN of the certificate the client is passing in matches a cn in an LDAP group. I figure I can do the LDAP group lookup with some easy perl stuff, its unclear to me though if --tls-verify is going to pass in the RDN of the client cert.
I have two firewalls, one primary (fw1) and one fall-back/backup (fw2). On the LAN side the fw's reside in the same LAN segment. I have a client who wants VPN redundancy. So I configured two VPN tunnels for this client. One via fw1 and a backup via fw2. Since the default gateway on the VPN server points to fw1 only the tunnel via fw1 is established. OpenVPN can't establish a tunnel via fw2 because of the gateway and just sits there waiting...
View 1 Replies View RelatedThis is the first one of probably many posts as I am new to Fedora having lots of questions. This one is about the openvpn client which is used by me to connect to my company network. Thanks to the Fedora FAQ it was easy for me to set up the client and establish a connection. There is just one problem every time I open a connection I am disconnected from my local Internet. I was using openvpn on my Windows XP PC before and there was no problem keeping two Network connections, the (W)LAN and the vpn tunnel. Does anyone know how to solve this? I am utilizing the latest Fedora 11 release and configured openvpn client via the Network Manager GUI.
View 2 Replies View RelatedI have (seemingly regretfully) finally upgraded my Fedora Core 7 linux machine that has served me so well for the past decade. One of the final pieces to put in place was my Openvpn config (which was running flawlessly on my FC7) which I cannot get to work.
Here are my steps.
1. Disabled SELinux
2. Added the following entry in my iptables: (although I've stopped iptables to help troubleshoot)
-A INPUT -i tap0 -j ACCEPT
-A INPUT -i br0 -j ACCEPT
-A FORWARD -i br0 -j ACCEPT
3. Yum installed openvpn and bridge-utils (btw I'm using bridging)
4. Configured my bridge-start script as such:
#!/bin/bash
# Set up Ethernet bridge on Linux
# Requires: bridge-utils
# Define Bridge Interface
br="br0" .....
5. Configured my openvpn server conf as such:
proto tcp-server
port 5990
dev tap0 .....
When I execute my bridge-start script it creates the br0 and tap0 then all connectivity vanishes (I can only ping my gateway 10.0.0.50) - internet and any other addresses time out.