Networking :: Network Interface Not Coming Up Automatically At Boot?
Feb 10, 2010
I installed Fedora 12 on an Eee PC 1001HA. This laptop has a Ralink RT3070 wireless chipset, for which the driver is not yet in the kernel (still in staging I believe). However I downloaded the driver, compiled it, and installed it. AFAICT, it works fine.
One small obstacle remains: I am uable to get the network interface to come up automatically; I have to run # ifconfig ra0 up. Because of this NetworkManager never sees the wireless interface, making connecting to WAPs a chore.
I created a ifconf-ra0 file in /etc/sysconfig/network-scripts, and it includes the line ONBOOT=yes, but this doesn't do the trick.
View 11 Replies
ADVERTISEMENT
May 25, 2011
I have this in my /etc/networking/interfaces file:
auto lo
iface lo inet loopback
iface eth0 inet dhcp
pre-up iptables-restore < /etc/iptables.rules
post-down iptables-restore < /etc/iptables.rules
but eth0 doesn't automatically come up. I have to do a "ifconfig eth0 up" and then do a dhclient eth0 in order to get an IP after each reboot.
View 2 Replies
View Related
Sep 6, 2009
I'm a newbie on Linux and trying to find my feet so please be kind.I have installed vmware on my XP laptop and have installed fedora core 9. Network setting on the VMware is set to bridged. My interface eth0 which is using the wireless does not start on boot. I have to run ifup ifcfg-eth0.The file ifcfg-eth0 had onboot=yes and NM=no, so i changed it so that the NM=yes.However this does not resolve the problem at all. I have put the file back to its original configuration and I have disabled network manager and have had no luck
View 2 Replies
View Related
Jul 18, 2011
I have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
[code]...
View 8 Replies
View Related
Mar 24, 2011
I have a server with two NICs. I tried to bond their network interfaces together, but it bombed out and didn't work, despite the fact I copied the example 100% except for my own numbers for addresses, etc. I decided to go back to a single NIC and let the other unused for now, since I need to get this server running. uh. yesterday.
[Code]...
When I boot up, often times eth0 isn't listed in ifconfig. I'll see eth1, which is just an unused interface at the moment, but eth0 is no where to be found. If I restart the network service, bam. I'm good. Why is it not auto coming up?
View 4 Replies
View Related
May 1, 2011
I'm using testing/Wheezy 64 bit: after upgrading to the latest repository kernel (2.6.38-2-amd64) my WLAN card isn't showing up unless I do a "modprobe brcm80211" or add " brcm80211" to /etc/modules.
View 1 Replies
View Related
Apr 7, 2011
I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.
[87.186415] Stack:
Why I am getting this messages and more importantly how do I get rid of them.
The installation is on a VM on Hyper-V.
View 1 Replies
View Related
Aug 30, 2010
today I tried to configure a network route to a host for testing my network interface. Code: route add 192.168.1.15 eth0 As I have to eth interfaces and both interface got their IP from DHCP (192.168.1.11 and 192.168.1.12) and are in the same subnet, I shut the other interface down:
Code: ifconfig eth1 down Then I tried to test the interface by doing a ping to 192.168.1.15.
Problem: When I unplug the cable from eth0 (and eth1 is still plugged) the ping still works. Somehow my linux (it's debian) powers up again eth0 and pings over this port.
How can I stop my linux doing this. I just want to have the route added only on the one interface - not the other. Is it maybe some case of a default-gateway?
View 5 Replies
View Related
Mar 29, 2011
I'm having all sorts of problems connecting an access point to my computer, but here is one piece that I hope will get me going, if I can get it solved.My computer has two network interfaces, eth0 and eth1. eth1 connects to the cable modem and thence the world, and works fine. eth0 is supposed to connect to the access point over a private network. Here is the output from route with my IP address blotted out:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
[code]...
View 2 Replies
View Related
Jul 30, 2010
If I have set up 2 network interfaces on a box, if I started sending multicast traffic, it will go out through both interfaces? Or is there a way to control through which interface it will go out?
View 1 Replies
View Related
Jul 3, 2010
I have two simultaneous active mobile connections through my two mobile phones and USB data cables. Yet I can only send/receive with one connection.Each of the phone modems have a node in /dev, namely ttyACM0 and ttyACM0. So the modems are detected correctly.After setting up two dial-up connections with the two modems I have two ip's. Ifconfig-a confirms this:
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.10.219.60 P-t-P:10.6.6.6 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
[code]....
View 1 Replies
View Related
Jul 7, 2010
I would like be able to access packets coming off the network with the hopes of coding a primitive packet sniffer for learning purposes. I would also like to be able to piece together my own packets and send them out on my network. Eventually, I would also like to write a simple firewall so I want the capability to drop packets as well as let them pass. I assume I will have to access the kernel with some system calls to do this, any one have any information or resources that could help me on this project?
View 1 Replies
View Related
Sep 9, 2009
How to figure out why there are errors on bond0(eth0)
Transfer speed is in KB
View 1 Replies
View Related
Jul 2, 2010
I'm on an embedded system that doesn't have Gnome, and I'm trying to startup networking automatically using /etc/network/interfaces. Here's what I have.
[Code]....
eth0 comes up just fine. wlan0 comes up, but it's unable to acquire a DHCP address. I added the following lines to /etc/rc.local, and wlan0 comes up all the way, but I'm not too crazy about this hack.
[Code]....
View 1 Replies
View Related
Jun 18, 2010
Showing my ignorance, but why would this work
address 172.16.1.8
netmask 255.255.254.0
network 172.16.1.0
broadcast 172.16.2.255
[Code]....
Notice the 2 in address. Seems to me it doesn't like the network and wants it to be 172.16.0.0, but I am adding to a network already configured this way.
View 1 Replies
View Related
Oct 6, 2010
I am trying to get my ethernet adapter list to make some sense. This is what ifconfig spits out
Code:
agarzon@euler:~$ ifconfig
eth3 Link encap:Ethernet HWaddr b8:ac:6f:3b:f4:4f
[code]....
View 2 Replies
View Related
Jun 17, 2011
Is there any way in a machine with 2 (or more) network devices to only allow 1 program to use interface1 and force all other programs to use the other?
View 4 Replies
View Related
Apr 20, 2011
i have ubuntu 10.10 and i want to configure my interface eth0 with the commande line with owner (not the Root)$ifconfig : this commande works and listed all interface with some description -> thats goodbut when i use some parametre like @ip and netmask
$ifconfig eth0 10.10.10.1 netmask 255.255.255.0
SIOCSIFADDR: Permission denied
SIOCSIFFLAGS: Permission denied
[code]...
View 6 Replies
View Related
Jun 3, 2010
Centos el5xen x86_64 in a company network, novell-netware, Static IP I have several issues with the Xen network configuration. This configuration worked before, and was maded by a other personn with a higher level in centos and network . I'm trying to re-install xen in bridging mode.
1) The dom0 ping in the company network, but can't acess to the Internet.
I de-activated firewall, iptables and SE-Linux for the test.
the ifconfig-a command return
eth0
lo
sit0 (IPV6 encapsuled in IPV4)
vif0
vnet0
but no Peth0 Physical device
Is it normal and how can i repare this ?
View 7 Replies
View Related
Mar 9, 2009
Someone just erased my HWADDR line from /etc/sysconfig/network-scripts/ifcfg-eth0. How can I obtain my original MAC address?
Code:
ifconfig eth0 does not work (it shows the wrong MAC address) since the HWADDR line from the file I mentioned above was erased. Also there is no ifcfg-eth0.bak backup configuration file.
View 2 Replies
View Related
Mar 21, 2011
I use chrony on my laptop thinking it would be better for it than ntp because I'm frequently connecting and disconnecting from wireless cafe access points and going in and out of suspend mode. But I've also noticed that if chrony is started before the access point is connected it never syncs to the time servers. I have to manually restart it via the service command after I connect. This doesn't seem right to me, if chrony fails to find a network at start time, doesn't it periodically try again ?
View 1 Replies
View Related
Feb 3, 2010
My old /etc/network/interfaces isn't working in 9.10. I've used it from 8.04 to 9.04 without issues.
I need to make multiple configuration per interface:
Code:
auto lo
iface lo inet loopback
auto lo:1
[Code].....
If not how can I downgrade the program responsible for reading this file?
View 2 Replies
View Related
Feb 26, 2010
running 9.10 server, have SSH access through LAN, but I'd like to move box out of my neighbor's (shared internet & the router's in his place) and into my own space. Would have done so already, but I can't get the wireless working. Details below:lshw -C network gives:
Code:
*-network:0 DISABLED
description: Wireless interface
[code]....
View 2 Replies
View Related
Apr 19, 2010
How can I force a Wine application (or Wine itself) to use a specific network interface? I have installed hamachi and am trying to play starcraft over virtual LAN. However, when I run Starcraft with hamachi running, it does not work. I have now determined that hamachi creates a network interface called "ham0". How do I force Wine/Starcraft to use the "ham0" network connection? I have looked into forcebindip but it crashes on wine.
View 1 Replies
View Related
Aug 19, 2010
I am a big ubuntu fan (9.04) installed,everything went well, installed my network card(s) & the onboard without no problems/installation disc.I have 2 Network interface(s) that I used on windows xP to 'bridge' my connection, because I only have one slot on my router, and the last slot runs into my computer room and from the PC, I run it to the xbox/ps3.No matter what I do, I cannot get ubuntu to share connection
to my other network interface.
View 1 Replies
View Related
Sep 17, 2010
My /etc/hostname is not announced on the local network (not showing up on my Mac nor router) when setting /etc/network/interfaces to:
Code:
iface eth0 inet static
address10.0.0.10
netmask255.255.255.0
gateway10.0.0.1
I have tried bringing the interface up and down, and have also rebooted. If I change it to DHCP it will display, but this does not really help me.
View 9 Replies
View Related
Apr 8, 2011
How can I force a Wine application (or Wine itself) to use a specific network interface? I have installed hamachi and am trying to play starcraft over virtual LAN. However, when I run Starcraft with hamachi running, it does not work. I have now determined that hamachi creates a network interface called "ham0". How do I force Wine/Starcraft to use the "ham0" network connection?I have looked into forcebindip but it crashes on wine .
View 5 Replies
View Related
Jul 22, 2011
I'm running Ubuntu 11.04 and I've been unable to access any type of Internet service besides web browsing. When I check on Network Tools, it's always set on Loopback Interface, regardless of whether I've just switched it to Ethernet Interface. I haven't been able to download system updates through Update Manager. I'm not very experienced with Ubuntu.
View 9 Replies
View Related
Apr 14, 2011
I found multiple sites explaining how to add IPs to a network interface as virtual interface like eth0:0. However I can add IPs to an interface as well using the ip command: ip a a 192.168.2.2/24 dev eth0 What I want to know is how I can make this persistent on rhel/centos.
View 2 Replies
View Related
Mar 28, 2009
I have fc9 installed on my system and I am facing a weird problem When I login to my machine (both as ROOT and USER) I do not get connected to the Internet automatically. I have to right click on the n/w Icon on the task bar, disable it and enable it gain then I get connected.
View 8 Replies
View Related
