Networking :: VPN Access To Web Application From Mobile Workstations
Jun 8, 2010
I'm currently on a project to allow mobile computers in our vehicles to access a web application. Unfortunately, most of our users are just smart enough to be dangerous...I would like to create a large private network over a wireless (3g, 4g, whatever), but in a way that forces the users to be on that network so that I (the evil IT guy) can control what they have access to. VPN seems like a good bet, but I want to be sure that the users are forced to only connect through it. As it stands, they're going to be using XP-based toughbooks.
View 2 Replies
ADVERTISEMENT
May 1, 2011
Is there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
View 2 Replies
View Related
Oct 4, 2010
probably I have screwed myself. I tried to preupgrade to f14 and cancel it after some time. Now, I am facing a problem that I cannot access internet from mobile broadband; but I can access net while i am connected via ethernet or wireless. I have cleared preupgrade files with
Quote:
yum clean all; yum remove @preupgrade
It can detect my HUawei modem and creating an IP as well. But no Internet.
View 7 Replies
View Related
Oct 4, 2010
I tried to preupgrade to f14 and cancel it after some time. Now, I am facing a problem that I cannot access internet from mobile broadband; but I can access net while i am connected via ethernet or wireless. I have cleared preupgrade files with
Quote: yum clean all; yum remove @preupgrade
$ uname -rs Linux 2.6.34.7-56.fc13.i686.PAE
It can detect my HUawei modem and creating an IP as well. But no Internet. Can you tell me the reason?
View 1 Replies
View Related
Aug 7, 2010
i recently-ish bought a netbook, and a mobile-broadband toggle to go with it, and set it aside to use later. i promptly installed the Netbook remix on the laptop. Well, I goofed, and didn't notice until well after I bought the WAN toggle that it was made for windows.
so, I downloaded Wine in an attempt to run the start.exe and get my internet. the executable (and the entire drive, i found) are marked by ubuntu as read only. Is there anyway to change this to allow me to run the file? if i did, would it even work?
View 4 Replies
View Related
Sep 20, 2010
I can pair my phone and laptop using bluetooth, from Network manager I can select my phone and make a connection. But then I can't access anything.I looked at the connection info from nm and tried to ping the given dns addresses. That failed. And I pinged those addresses when I reconnected with wireless and it failed. So, where are these setup? I didn't do it
View 8 Replies
View Related
Feb 21, 2010
I have 4 machines 2 running Ubuntu 9.10, and one running windowsXP, and the forth will be Windows XP,only because some of my printer functions I can only get to work with windows, previous to upgrading to Ubuntu 9.10, I had everything working fine, my windows could see my Ubuntu's and my Ubuntu could see my windows, at that tine only had 1 ubuntu, now windows cannot see ubuntu and ubuntu cannot see ubuntu, my plan is to switch to mythbuntu , when I get things working, because I plan on adding 3 more machines, I have Gadmin-Samba installed on my ubuntu machines, do I need anything else. after upgrading to ubuntu 9.10, I had a system crash and had to start all over, this is just a home network with only one user.
View 7 Replies
View Related
Oct 17, 2010
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies
View Related
Aug 25, 2010
I have 2 LANs in my network. They are:
LAN 1: 192.168.0.0
LAN 2: 192.168.1.0
Both LANs, communicate with each other. And both have an application server. In LAN1, I can access the web server, internal and external. At LAN2, only works on the internal network.The rule that I'm using is as follows: iptables -t nat -A PREROUTING -p tcp -d my_ip --dport 80 -j DNAT --to 192.168.1.254:80
This rule works for LAN1, but not for LAN2. Anyone know what that is can be lockin access?
View 2 Replies
View Related
May 13, 2010
i want to know that which application in linux will give me access to the router like in windows we use hyper terminal or i have to install a particular package
View 2 Replies
View Related
Aug 29, 2010
I just want to tell everyone how good the Garmin/Asus A10 mobile phone is as an internet modem.I am in Australia and Mobile internet is an expensive thing to have. cheapest is dodo but i had a few problems trying out a friends usb modem.Anyway i was in the market for a Gps phone and discover this one. it is Android phone and pretty cheap so far it is very good gps, camera, mp3, and phone is excellent.BUT here is the clincher. when you plug it into the computer, the phone screen lights up and gives you 3 options.
View 1 Replies
View Related
Feb 25, 2010
if is there any application for using mobile phone for wireless headphones for Linux? Instead of buying a microphone and headphones wireless I'd like to use my phone for that, using bluetooth or wifi.
View 2 Replies
View Related
Jan 4, 2010
I just got a brand new usb wireless adapter. Plugged it in, picked it up but then a window came up and said "The application nm-applet wants to access the keyring. Please enter password." I entered my password, the window goes away for about 1 second, then comes back up again. With my old usb wireless adapter, it never did this.
View 3 Replies
View Related
Mar 11, 2010
I have dictionary.jar If I save it in my mobile & open it then dictionary opens up with facility for entering word to search.I am using ubuntu 8.04 with 'sun-java6-jre sun-java6-jdk sun-java6-plugin' installed.I read URL...which says that application has entry point. I don't know java.
View 13 Replies
View Related
Feb 8, 2011
last friday my schools isp enabled iwsva - interscan web security virtual appliance from trendmicro. all traffic is now filtered, and slowed down. videos and other videostreams are now useless. after this we have had serious problems using our netbooks with ubuntu, and upgrading workstations with ubuntu has become very problematic, or almost impossible. i have to run the update process 6-8 times before all packages are updated.
what can i do to document the problem in a good way. the isp tells me that there are no problems, and that it has to be a linux problem. (ever heard that one before?) the ltsp-clients on my debian servers does not have the same problems, maybe because they are using the proxy on this server?
View 5 Replies
View Related
Dec 12, 2010
I am looking for an application to assist me to back up my sim card on my mobile telephone. In fact I am aiming to copy all my phone contacts and restore it on a newer phone if possible.
I have previously attempted to do this on Wammu without success.
I have also attempted to install monosim without success.
View 4 Replies
View Related
Apr 14, 2010
I have a cheap and cheerful netbook (Advent 4213) that I carry around with me running the latest lucid build, it has a built in 3g modem which I like cause I don't have to carry a dongle round with me.... which I continually lose anyhow I also have two data plans, one with Orange UK and the other T-mobile UK. The 3g modem is a HUAWEI Technology.
Both sims work for normal Internet access, I can connect to email servers, access web (both http and https) sites, but when I'm using the T-mobile sim Ubuntu One crashes after about 5 mins after attempting to connect. At first I thought it was a problem with either Ubuntu One itself or the lucid build, so I tried accessing the website interface.... I can login but when I go to view my files (I am assuming you are familiar with Ubuntu One) the page "load" progress bar gets so far and then stops..... it appears to be trying to access ssl.google-analytics.com, but just sits there and eventually times out, I am assuming this timeout is what is causing the Ubuntu One to crash.
Stick the Orange sim back in and everything is OK, go back to the T-mobile sim and it no worky anymore hence the reason I think this is a T-mobile issue and not something wrong with Lucid or Ubuntu One..
View 1 Replies
View Related
Oct 14, 2010
I would like to know as how can I access the mobile using USB in Ubuntu 10.10 is there any software which will help me in this.
View 2 Replies
View Related
May 10, 2009
I've installed CentOS 5.3 on my Compaq Evo N800w mobile workstation (laptop). I was able to map the volume up and volume down buttons to the proper function using System - Preferences - Keyboard Shortcuts. I need to map the Internet Browser, Email, Search, and Media Player to the other Easy Access Buttons that Compaq has on this keyboard. Has anyone had success using programs like keyTouch to get this accomplished? Should I be considering other solutions?
View 1 Replies
View Related
Feb 17, 2010
application to monitor application wise network usage?
View 3 Replies
View Related
Feb 24, 2010
I am thinking of installing a Linux mail server and use it for my company. We are about 3 people that using emails and i do not want do spend a significant amount to get an exchange server. However, i need a mail server that i will be able to get the functionality that exchange server provides such as emails (to my mobile, web access, and using outlook client), calendar, tasks and contacts. Can you reccomend me which Linux mail server should i use for all the above functionality?
View 6 Replies
View Related
Jun 28, 2011
how can i make my samsung e1410 mobile compatible with mobile internet in Ue 2.9
View 1 Replies
View Related
Mar 3, 2010
I understand this kind of defeats the purpose of the NBR setup, but i have 4 workspaces and I want to have 3 different apps open in 3 of them, and the NBR startup in workspace 1.
so is there a way to disable this interface in specific workstations or no?
View 1 Replies
View Related
Apr 22, 2011
I am testing vnc functions, but I only have 1 imac. I am thinking to set up a server and the viewer on the same machine to see if it would be ok.
The problem happens. It is infinite loops; therefore, I have to shut down my imac to restart everything.
I thought there is something I can do to have server and viewer on the same machine. I am ok to split monitors, but how to let server own a different ip to let the viewer to connect without having infinite loops happen?
View 5 Replies
View Related
May 19, 2010
when i want to open one file, there are many ms access in my application,please my attachment,what's wrong?
View 1 Replies
View Related
Dec 30, 2010
some weeks ago, I started getting the prompt from the keyring manager after each login:Enter password for keyring 'Default' to unlock.An application wants access to the keyring 'Default', but it is locked.I don't know what I could have changed, but this is getting pretty annoying. I know that it is not the network-manager, it is configured for "all users" and my Wifi is working even when I cancel the dialog. In fact, canceling the dialog seems to have no effect at all.
Is there any way to find out which application might be trying to access the keyring (and to stop it from doing so)? I already tried disabling some of the startup applications (which seem to be all default anyway) but that didn't help.Please note that I do NOT want to set an empty password for the keyring because I think protecting it is a good thing. I just want to be prompted for the password only when I use it.
View 2 Replies
View Related
May 1, 2010
I started using Linux when Karmic came out, so I'm a bit of a decorated newb. Anyway, I upgraded to Lucid and noticed something that I can't do anymore. I have a dual-screen setup with 2 workstations. I can drag windows from one screen to the next, but when I try to drag it over to another workstation, nothing happens anymore. The only way I can get it to work now is if I hold down the cursor on the desired window and hit Ctrl + Alt + L/R. How do I report this as a bug if it is indeed one? All I can find is a link to join a bug fixing team.
View 4 Replies
View Related
Aug 9, 2010
Environment: Debian Lenny | Samba/CUPS | Network: 25 Workstations (WINXP SP3) | Printer: Samsung ML2010 (on server) That�s it. Problem: All workstations can print, except two. I formated the two workstations, installed everything again and nothing!
View 2 Replies
View Related
Nov 18, 2010
I have written a simple server application (with an HTTP interface). I want to ensure that only calls from the local machine are processed - i.e. I want to prevent outsiders from accessing/using my server.
How may I restrict outsiders (i.e. requests from remote machines)?
View 4 Replies
View Related
Jan 20, 2011
How can I prevent a certain application from having access to ALSA. It keeps stealing my audio.
View 2 Replies
View Related
