I'm having two problems with remote syslogging with this configuration in syslog.conf:
*.info;authpriv.*;cron.* @myhost.dnsalias.com
As you can see the logging is made to an host with dynamic ip, and as soon as the ip changes the logging seems to stop.
Another thing is that it only seems to log the first part (*.info), the other ones don't appear.
I am looking for a way to be able to access my PC from a remote place. The problem is that I have a dynamic IP. I have registered at dyndns and have found settings in the router to 'Activate Dynamic DNS' and then you supply your dyndns address, password and tell it to update the WAN ip address automatically. This works, however only internally and only to the router as opposed to my PC I am not interestes in accessing the router to configure that remotely, only accessing my own PC.
Is this something I can accomplish with:
A ZyXEL P-660R-D1 router
A dynamic WAN IP address
A PC connected to the router
A static IP address for my PC
Is it possible to provide remote Windows users access to a LAN via the Internet when the LAN itself is connected to the Internet via a SOHO router that is assigned an IP address dynamically? An LQ thread from 2004 includes a suggestion to use VPN and DynDNS.com. Is that still a good solution? Are there any security issues?
Assuming:VPN is a good choice. DynDNS.com or similar can be used to give remote clients the public IP address of the SOHO router. the SOHO router is configured to forward VPN traffic to a Linux system acting as the VPN gateway. then, for a LAN of ~20 IP nodes and less than 5 simultaneous remote clients, are there any other VPN server software solutions to consider other than OpenVPN, Openswan and strongswan?
I have a Tomato router and it has the capability to have its logs go to a external server. syslog is the obvious choice for this. So I enabled remote logging on my linux server's syslogd (syslogd -r) and I can see all of the logs in /var/log/syslog. What I want to do is take everything that comes from the IP of my router (10.0.0.1) and divert it to its own file like /var/log/tomato to avoid polluting my syslog with external logs.
I can't find any examples of someone doing this. My only solution is to get a script together that strips out any line in /var/log/syslog with 10.0.0.1 in it and puts the line into /var/log/tomato and have the script run as a cron job, but that seems unnecessarily messy.
Unless someone knows that there is a solution, I'm 95% sure that syslog doesn't support this after reading more in-depth of the man page. So I need to migrate to syslog-ng or make a crazy script that runs with cron.
For remote syslog logging of the general log files, I set:
Quote:
How do I setup the remote syslog logging of apache logs? Do I just add a line in the httpd.conf file to for example ?:
Quote:
I installed syslog-ng so I can receive remote logs. this is working however since I disabled syslog on my syslog-ng server I am not logging in /var/log/messages cron and some others.locally)I know this is because my syslog-ng.conf only references remote and not local.How can I edit the syslog-ng.conf file so that I can receive remote and local? I tried this however when adding in portions of the default config, I only receive local and not remote logs anymore. I am forwarding my config.
# syslog-ng configuration file.
#
# This should behave pretty much like the original syslog on RedHat. But
[code]....
I'm having trouble getting my pix firewall to log to syslog server. Here are the steps I took:
1) Added the following line to /etc/sysconfig/syslog:
SYSLOG_OPTIONS "-m 0 -r514"
**for some reason, without the 514, syslog doesn't listen
[code]....
I want to restrict the Visitors to my Webserver whom i want to give access But the persons whom i want to give access. have Dynamic IP. I want to use DynDNS and update IP address of person. Based on the Hostname Pointing to Dynamic address of person.
View 5 Replies View RelatedI am looking for an open source syslog server which accumulate the each and every log of Windows, Solaris, Linux and network devices. Currently I am using Syslog-ng which is not fulfiling my requirement in Windows clients, as I need the logs of every action which user performed after logon.
View 2 Replies View Relatedtrying to replace syslog with syslog-ng. When I:
yum erase syslog,
wants to remove everything else that (presumably) has syslog as a dependency. how do I replace the dependency on syslog with a dependency on syslog-ng?
I noticed in my system that my root partition is getting full. I found a lot of old compacted syslogfiles. Had a look at etc/sysconfig editor eg cron but could not find a setting which allows to delete files older than a month. Where and how could I influence this ? I deleted manually all syslog files older than a month. Approx 6GB
View 9 Replies View RelatedI have a problem with Dynamic DNS for Debian..
View 2 Replies View RelatedFedora 12 64bit What will be the correct steps changing dynamic IP to static IP on F12 console, instead of on Gnome running;
System -> Administration -> Network -> Edit, etc.
I made following test;
Edited ifcfg-eth0
$ cat /etc/sysconfig/network-scripts/ifcfg-eth0 Code: # Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
DEVICE=eth0
BOOTPROTO=static
[code]...
I've setup dynamic port forwarding using Putty, SSH and Firefox.All works well when visiting normal websites (servers listening at port 80). But why can't I visit https websites?Nothing seems to be happening when I visit those.
View 2 Replies View RelatedFedora 12 What will be the correct steps changing dynamic IP to static IP on F12 console, instead of on Gnome running;
[Code]....
I've read some guides on how to setup ssh with dynamic DNS, but can't seem to get it to work. My Linksys router is currently set to forward port 22, so I don't know why SSH still gives:
ssh admin@xxx.hopto.org ssh: connect to host xxx.hopto.org port 22: Connection refused In particular, I also have openssh-server running on the target machine. Given that I have port forwarding enabled, why would this be happening? If I try to login directly to the IP, I get the same refusal.
I was wondering if its possible to see if my ip has been registered under a dynamic dns name? Reverse DNS does not resolve.
View 1 Replies View RelatedMy university uses 802.1x Dynamic WEP, with PEAP, MSCHAPv2, and no CA certificate. Our IT department actually provides instructions for Ubuntu, and they work, but I can't get it to work in Kubuntu. Here's the instructions using the Gnome Network Manager applet:
- Change the LEAP setting to Dynamic WEP (802.1x).
- Change the Authentication setting from TLS to Protected EAP (PEAP).
- Leave the Anonymous Identity option blank.
- Leave the CA certificate setting to None.
- Change the PEAP version to version 0 if running 8.10, or Automatic if running 9.04+.
- Leave the inner authentication setting to MSCHAPv2.
- Enter your username.
- Enter your password.
- Select OK. A warning message will appear about having no certificate; click Ignore.
- Click Connect.
I'm using Kubuntu 10.10. All the same settings are there for the KDE plasma network manager applet, but the connection always fails immediately. How do I go about debugging this? Is there a way to test this out from the command line? (WiFi in general works fine, on regular WEP and WPA secured networks; just having trouble with this one).
I am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).
My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
I want to access and run some programs in the terminal on my office Linux machine from my home through Internet. I use Fedora 10. However the internet connection at office has dynamic IP.Is it possible to access remotely a terminal on machine which has Dynamic IP addresses? How?
View 9 Replies View RelatedGot a Ubuntu system. Have a device on my LAN that can send Syslog messages.
I would like to:
1. Capture these specific syslog messages.
2. Keep them separate from any other syslog activity on the Ubuntu system.
3. View these syslog messages later.
I have 4 Ethernet Interfaces. I need Dynamic IP-Addresses for 2 Interfaces. Can anybody help me how can i achieve that
View 3 Replies View RelatedWe have Verizon as our ISP with a dynamic IP address. We published our website but the IP changes frequently. How can we set Network address translator(NAT) so our website can be published regardless of IP changes? We don't have domain name and have no intention for one.
View 2 Replies View RelatedI am using RHEL 5.2. I want to configure Dynamic DNS on it. Can anyone tell me how to configure Dynamic DNS on RHEL 5.2
View 1 Replies View Relatedin my iptables script I define the environment like this:
Code:
# ENVIRONMENT
# Private interface
IF_PRV=eth1
[code].....
if I give the IF_PUB interface the DYNAMIC IPaddress assigned by my ISP how can I define it in IP_PUB and also the NET_PUB so I can then use it for the firewall rules.
exemple rule:
Quote:
iptables -t nat -A POSTROUTING -s $NET_PRV -o $IF_PUB -j SNAT --to $IP_PUB
I am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
View 7 Replies View RelatedI'm looking into setting up logging for Samba that logs every file downloaded, uploaded, renamed, deleted, etc, etc. It's currently working, but I'm trying to get it to output to /var/log/samba/audit.log and it's still outputtin Here are my current settings:
[Code]...
I've just configured my Linksys RVS-4000 router to syslog messages to remote syslogd server (i.e. my CentOS5 machine). Redirecting messages was easy, but now I'm having difficulties to redirect those same messages received from Linksys to a separate log file. By default, all these messages are logged to /var/log/messages, and after browsing manual pages for syslog, syslog.conf, and syslogd, came to suspect that what I want isn't possible.
View 1 Replies View RelatedIs there some kind of Ubuntu desktop application that notifies you when your WAN ip address has changed? I don't care about my LAN ip address. I need some kind of popup on the desktop when my ISP assigns the next dynamic WAN ip address.
View 1 Replies View RelatedIs it possible to bond an existing bond. I have 4 nics assigned to 2 bonds for link aggregation. ie
e1000g0 - bond1 - mode =4
e1000g1 - bond1 - mode =4
e1000g2 - bond2 - mode =4
e1000g3 - bond2 - mode =4
I would have presumed that you have 2 x agregates giving 2 x 2gig links and the resilience is that if one nic fails in either bond you carry on with that bond running a 1 gig link until fixed. But, our architect wants to have an active/passive (mode 1) accross bond2 and bond3. I have setup tons of mode 1 bonds and mode 4 bonds but never tried bonding 2 x mode 4 bonds!