I created a Symbolic link for ifstate from /etc/network/run to /var/run (/var/run is mounted as tmpfs) and I can write to and from the file perfectly fine, but when trying to start the network I get "Failed to overwrite statefile Read only file-system". I double checked permissions to see if that was the problem, but it does not appear to be
View 5 Replies
I am trying ti set up a NFS server using the guide on [URL] However, the NFS mounts on the client side as a read-only file system, so I cannot modify nothing. Here is my /etc/export file on the server side:
Code:
/home/acrocephalus/ 192.168.1.35 (rw,async,no_root_squash)
and this is my /etc/fstab file relevant line on the client side
Code:
192.168.1.33:/home/acrocephalus/ /home/acrocephalus/AcrocephalusServer/ nfs rsize=8192,wsize=8192,timeo=14,intr
Then, I mount the system using the command
Code:
sudo mount /home/acrocephalus/AcrocephalusServer/
.
how to mount the NFS with full read-write permissions?
since arch has started using python3, bleachbit is broken, so i am looking for a system cleaner to replace it. i need something that will overwrite file contents and clear firefox cache + the all the normal functions of a system cleaner.
View 8 Replies View RelatedI bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
My Redhat Enterprise Linux 4 with 6x partitions (/, /boot,/home, /usr, /var, /tmp) of 6.0 GB IDE Hardisk was working quite fine. I decided to create LVM on /home and /var partitions but due to some errors occured and I delete the /home partitions. That's why partition table altered. I then delete 4,5,and 6th partitions (/home, /var, /tmp) partitions and now try to create one by one but following error is coming:-
[Code]....
The Super block could not be read or do not describe a clear ext2 file system. E2fsck b 8193 <device> I have tried following commands,but could not successful:- e2fsck -p /dev/hda7 (where hda7 was created but afterthat it was deleted) e2fsck -a /dev/hda7
Have just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies View RelatedI've used gconf-editor to disable the "show_desktop" feature of Nautilus to get multiple wallpapers to work, but now want my icons back. But I can't:
Code:
warnec@lucidL:~$ LANG=C sudo gconftool-2 --type bool --set /apps/nautilus/preferences/show_desktop 'true'
Error setting value: Can't overwrite existing read-only value: Value for `/apps/nautilus/preferences/show_desktop' set in a read-only source at the front of your configuration path
It does neither work with gconf-editor. It says this key is "protected from writing"
I plugged in my USb drive into my computer yesterday and tried to delete a folder. I was unable to do so and got the following message
Cannot move file to trash, do you want to delete immediately? The file "my file" cannot be moved to the trash. Show Details Unable to create trashing info file: Read-only file system
So when I click on delete I get another error message:
Error while deleting.
There was an error deleting Case Study Database. Show Details Error removing file: Read-only file system
At this point I can only click on Skip, Skip All, or Cancel.
I have not changed anything on the stick recently so I dont know what is causing the problem.
[code]...
Failed to read mirror file. it eventually shuts down saying "reverting to original state"?
Can windows read files from a home file server with an ext4 file system? or do I have to partition the drive with the server (ext4) and an ntfs partition with the files on?
View 4 Replies View RelatedAll my torrents go to my home/username/Download/ folder, I could read/write yesterday but now I cant even copy the files to a flash drive.The error i get is "Cannot create regular file '/home/username/Download/file' : Read only file system.
View 14 Replies View Relatedmy partitioning layout was as follows
Vista Recovery
Windows 7
GRUB
Extended
-->Fedora 12 (ext4)
so, I shrunk my recovery in Windows 7 successfully, and booted into my Fedora 12 live cd to run Gparted, and move the partitions so that the free space could go towards fedora, I did such, and then I couldn't expand the partition to my dismay. Next, I woke up this morning, tried to boot to fedora to run SSH, grub loaded, but when I tried to boot fedora, I got the "File system check failed" error, and when I tried 7, it just went to a blank screen with a single "_" in the top left-hand corner.
yesterday my downloads stopped working in transmission and gave an error: 'read-only file system'i have since found that all files on my eternal hard drive are now read only.i think it may have something to do with me recently changing the download location to my external hard drive in transmission. how i can rectify this and make it so i can read write again
View 2 Replies View Relatedi want to know why do we need to patch files based upon diff when we can directly overwrite the old file with the new file.
View 4 Replies View RelatedWe have some large files with sampling data in it. Don't want to delete these files. But want to quickly overwrite the file with 0s and/or 1s and preserve the original file size.
View 3 Replies View RelatedI have sandisk usb and want to get rid of the "U3" partition that's on it, but its a read-only file system. can't chmod to 777 from root
View 3 Replies View RelatedI have a problem with my USB drive. When i try to make a file transfer, i get the error message which says that it is a 'read only file system' and i can not transfer any files. While looking for a way to solve the problem, i came across another case similar to what i have now which discussed in this thread: [URL]
However, i didn't understand how to resolve the problem from that thread.
I have a file system that I can't seem to read and write to. I've tried everything I can think of.
Code:
root@xubuntu:/mnt/t1# ls -la
ls: cannot access .Trash-1000: Input/output error
[code]....
I made a modification to the /etc/fstab using Ubuntu 10.04 and now it wont boot correctly. I can get the cli but when I enter /etc/fstab and make an edit it says" changing permission of /etc/fstab: read only file system"How can I mount the partition so that I can edit it
View 6 Replies View Relatedi have used debugfs command and "open -w /dev/sda1" command, but i did not close it. the file system is in read-only mode now.
View 2 Replies View Relatedrm: cannot remove `dny': Read-only file system
i am administrator :
[root@pty12237b ~]# id
uid=0(root) gid=0(root) groups=0(root)
[code]....
i want to edit the file menu.lst in /boot/grub i m facing a problem of not to enter in to the graphical interphase, so i m using only the boot terminal whn i try to edit this file it says the file is read only. i tried to change the permission of file with chmod also
but it is also not working i tried the comand gksu gedit /boot/grub/menu.lst but it is not opening the file to edit since the graphical interphase is not there.
Asuming I have two files, one large file and one small file, I want to write the smaller file to the large file without overwriting the remaining part of the larger file.
Both are binary files, and the large file can become very large, so I want to avoid copying the whole file, as that will take some time. Is there any standard Linux console utility to do this, or do I need to write it myself?
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies View RelatedPossible Duplicate: Cross-platform file system Can you please tell me what kind of file system can be read by MacOS X, Linux and Windows? And it can create a file greater 4 GB?
View 2 Replies View RelatedI insert a certain cdrom into my DVD drive, the cd is mounted meaning I do can see the cd rom icon on my desktop. The cd rom icon name is the correct label of the cdrom but when I try to open the cdrom it results to be empty.
Then on the same computer I have installed Virtual Box and the Windows 7 image does read the content of the cdrom.
How can I read the content of the cdrom with ubuntu 9.10?
I can't insert songs in my iPod nano.There is an error occurs which says that it is a 'read only file system' in ubuntu
View 7 Replies View RelatedWhen trying to copy files from a local folder into a directory that is a mapping of my QNAP server I get an error message " Read-only file system" - and this only since a couple of days.Trying to change ownership with sudo chown also failed.
View 9 Replies View RelatedI made a modification to the /etc/fstab using Ubuntu 10.04 and now it wont boot correctly. I can get the cli but when I enter /etc/fstab and make an edit it says" changing permission of /etc/fstab: read only file system" This is what I get when the system boots:
PHP Code:
[code]....
so if I choose manual I get to the cli and whenever I attempt to edit the file I get the above error. I used another machine and attempted to mount the drive but I get the same error I added notaime option to my fstab by accident so if I choose manual I get to the cli and whenever I attempt to edit the file I get the above error. I used another machine and attempted to mount the drive but I get the same error. I tried
PHP Code:
[code]...
and I get
PHP Code:
[code]....
How can I mount the partition so that I can edit it?
I regularly rsync directories to an external usb drive. Recently I've started getting errors which look:
blah blah:Read-only file system (30)
The external usb drive has two partitions (ext3 and fat32) and I rsync to the ext3 one. The rsync command is
rsync -ahi --delete /home/mike/some_dir /media/usb_drive
People have reported this error with faulty usb cables but everything was working fine until recently so it seem unlikely a usb cable would suddenly wear off.
