Installation :: Run Ubuntu From A Flash Drive?
Jan 18, 2011
I'm a complete beginner at Ubuntu. I have Windows XP on my computer, but would like to run Ubuntu. However, I don't want to install it on my hard drive. So I figured I would just install it to, and run it from, a flash drive. I've seen some mixed instructions on how to do this. I want to have Ubuntu(and nothing else) on a flash drive. When I plug the flash drive in, I boot from it via BIOS setup. Then it's running Ubuntu directly from the flash drive. Anything I do, save, or install is saved to the flash drive. When I shut down the computer, and unplug the flash drive, then reboot it,nothing in XP has changed. Next time I boot from the flash drive, everything that was previously on it, is still on it(I plan to use a 32 or 64GB flash drive, or I might even step up to a portable hard drive). How do I do this? I've heard something about a "live" installation of Ubuntu? Can someone give me a link to it(not just www.ubuntu.com)? Also, a step-by-step guide would be very helpful(if it's not just as simple as installing to the flash drive).
View 7 Replies
ADVERTISEMENT
Jan 23, 2010
I wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies
View Related
Jun 11, 2011
Back in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
[Code]....
View 5 Replies
View Related
Jun 20, 2010
I bought an 8GB flash drive because my D drive doesn't read DVDs. Anyway, my goal is to install Linux ubuntu and have it be my OS (replacing Windows XP). Last night I went to the Ubuntu homepage and downloaded the Ubuntu desktop edition 32-bit and put it on my flash drive. I followed the instructions on how to open and run it, but I was never asked about whether I want Linux to run side by side with Windows or if I want it to replace Windows. It downloaded the whole program, my computer restarted and then (on a black screen) it asked if I wanted to use Windows XP Home Edition or Linux Ubuntu. It's really frustrating because it took a while to download and install it in the first place AND to top that off, when I tried to use Ubuntu it went to a black screen and at the top said that there was an error. So I uninstalled all the ubuntu program and software and now I have a clean slate and want to try this again. I am a complete n00b. Could someone please walk me through how I can go about downloading (w/ links plz), installing and making ubuntu my ONLY OS on my computer via a flash drive? I'm desperate and I don't want to go through all of that and make the same mistake again!
View 9 Replies
View Related
Dec 23, 2010
I want to make one of my flash drives into virtual ram. The problem is nobody seems to know how to do it for Ubuntu. I could also be going at it the wrong way I basically need more ram to play games like StarCraft 2 but I have no money for the cheepist stick of ram.
View 8 Replies
View Related
Jul 15, 2011
I want to install Ubuntu 11.04 on to an 8GB flash drive. Not create a Live USB. How would I go about doing with? What would the partitions be if i have 6 gigs of RAM?
View 1 Replies
View Related
Jan 10, 2010
Yesterday I installed Ubuntu Linux from a flash drive, and it worked perfectly. While I was on it, everything froze so I restarted, but when I restarted, the window to install Ubuntu from flash drive, or run it from flash drive, etc popped up even though I had already installed it. I chose to install it, but it wouldn't work. I tried to turn the computer on without the flash drive in, but it said to insert system disk, etc. I went into the Advanced BIOS and it was already set to first boot from harddrive.
View 1 Replies
View Related
Jul 8, 2010
I'm trying to install Ubuntu 10.04 onto my 8GB flash drive using these instructions. I've run the install and installed GRUB2 and 10.04. However, selecting 10.04 on GRUB doesn't work.
On the instructions, it says this:
Quote:
You will also need to manually edit the menu.lst file of the new USB installation to change the boot references to /dev/sda, rather than /dev/sdb (or /dev/sdc etc.). This can be done by booting to the live distro mode of the Ubuntu install CD and editing the /boot/grub/menu.lst file on the USB stick. You can mount the USB stick using the Places menu -- once mounted, it can be found at /media/disk.
I'm not sure what the equivalent step would be for the GRUB2 files.
View 9 Replies
View Related
Aug 31, 2010
it does not have a cd drive, i know that you can install off of a flash drive.
View 2 Replies
View Related
Oct 9, 2010
When the new version of Ubuntu 10.10 32 bit Alternative comes out I'm going to download it so what I need to know is can I install it to the USB Flash Drive and run it like a live CD ? really I would like to install it to the USB without it asking me everytime I boot up would you like to try ubuntu I'm like yes that's why it's on here. If I don't use Alternative iso I get a keyboard.
View 2 Replies
View Related
Oct 23, 2010
After many failed attempts, I finally got Ubuntu on my Flash Drive (16gb). This was completed by downloading Ubuntu Desktop Edition (ubuntu.com), and using The Universal USB Installer to put the .iso on my Flash Drive.
When I try to boot my PC from the flash drive, I get a black screen saying...
"No DEFAULT or UI configuration directive found! Boot:"
View 3 Replies
View Related
Nov 23, 2010
I recently decided to install Ubuntu (ubuntu-10.10-desktop-i386.iso) to my 16GB flash drive (was fat32 originally, tried ntfs as well had boot issues,went back to fat32) to boot from it using the method on this page using the Universal USB Installer. Install worked great, Ubuntu works great, problem is I can't see the rest of the files on my flash drive.
View 3 Replies
View Related
Nov 29, 2010
How could I install and run Ubuntu on a flash drive? by that I mean have it so I can RUN Ubuntu off of the flash drive on any PC it is plugged into.
View 7 Replies
View Related
Jan 26, 2011
Recently I have purchased a laptop of compaq. Currently I have windows xp and I have installed Ubuntu 9.10 in my laptop. Now I have downloaded Ubuntu 10.4 from the net. Now I want to upgrade from 9.10 to 10.4. The downloaded contents of 10.4 is there in my flash drive. Kindly let me know how can I upgrade. Also kindly note that I am having a reliance USB net connect but I am not able to connect to the internet through it as 9.10 is not supporting. I have tried to install the wvdial but was not able to install the same. Kindly help me out as I am fully non technical guy and don't have any idea of software but I want to learn. In case I have to save it to root or home folder kindly let me know the path and other things that I have to type in the terminal.As I don't have any idead of any command as well.
View 4 Replies
View Related
Feb 25, 2011
I am successful installing ubuntu on new systems. I am unable to install the os on pentium 4 with 256 mb RAM using flash drive. I am getting "could not find kernal image: linux"
View 8 Replies
View Related
Mar 29, 2010
I made a persistent install of Ubuntu on a flash drive. I made changes to that installation. The software (Unetboontin) sets this all up. I think it partitions it for you. How do I image that flash drive to another flash drive?
View 9 Replies
View Related
Jan 20, 2010
I've tried installing UNR on a 1GB flash drive in the past, and on two occasions it completely broke due to lack of disk space. When I say broke, it was when I was trying to install or upgrade packages, it said it ran out of disk space, everything slowed right down, and in the end I had to restart. I was put into a recovery shell and after poking around for about 30 minutes, gave up. Then reinstalled.
Now my shiny new 4GB flash drive is split into two sections, one for documents (1.9GB) and one for the installation+persistency file (1.9GB). I went about updating the UNR system, adding software I need (some of which is quite big, anti-virus software, lyx etc), and quickly found the old warning message: disk space low. hastily make some free space (apt-get clean, delete a big firefox cache), and post this message. My questions:how do I find out how much disk space is left on this 1.9GB partition - specifically the persistency file? I've tried disk usage analyzer, also du -h, but can't really understand it. I want to be able to see ahead of time when I am short of disk space. I would like to switch to using XFCE instead of gnome for speed and disk space. Is this possible? What is the best way to switch, without risking maxing-out disk space and crippling the system again? is there are way to take a snapshot of the whole partition? I would like to back it up in case it goes haywire again. Would I just want to copy the persistency file, that's it?
View 5 Replies
View Related
Mar 1, 2010
So I am at my wits end trying to figure out why this won't work. I am trying to install ubuntu 9.10 on my netbook (I hear it runs better than remix) but an running into a wall. I am already using Jolicloud as my main os on my main partition. I have used Unetbootin to get the 9.10 iso on my re-movable media. I have gone into the bios and chose to have it look at the re-movable first, then my 1st partition on the HD. For some reason it never looks at the USB drive. I have disabled everything on boot except for the media and i get a screen that says "insert bootable media or restart" then i have to go back into bios and enable the HD again.
Side note, the media I am using might not be in fat 32 because I haven't figured out how to format in linux but, I have formatted in windows so that it is fat 32 and got the same problem.
View 6 Replies
View Related
Mar 15, 2010
I have an 8GB Sandisk Cruzer, which reportedly works just fine booting Linux. It does have U3 still present on one of the partitions, but this should not pose any problems either. I also have a 2GB FAT32 partition for storing Windows stuff. The rest (5.7GB) I have reserved for Ubuntu. Windows reports this as an active partition, and the Ubuntu boot CD reports this partition as dev/sdb5. I have installed Ubuntu from the Desktop CD to the USB partition using the guided install (largest continuous free space) and selected the boot (grub) location on the same partition (sdb5), as I'd rather not modify my existing windows bootloader. A 300MB swap partition also exists on the drive. When I attempt to boot the USB drive from either my laptop (Inspiron 1505) or desktop (Abit IP35 Pro), only a blinking dash (or underscore) appears with no LED activity on the flash drive. Could it be that the MBR of the flash drive needs to be aware that the grub install is located at sdb5?
View 1 Replies
View Related
May 13, 2010
I've been trying all day to install Ubuntu Server 10.04 on my netbook via a flash drive (It doesn't have a CD-Rom drive).However, I can't get any further than "No common CD-ROM drive was detected." I've looked at various solutions but have not found anything that works yet.
View 1 Replies
View Related
Jun 8, 2010
I need some1 2 direct me on how 2 install wicd on ubuntu 10.4 from a flash drive.
View 1 Replies
View Related
Jul 28, 2010
I'm getting 'File is broken' messages while trying to set up Ubuntu 10.04 on 4GB flash drive. Following instructions on [URL] I downloaded Ubuntu Desktop Edition - 32bit version. It shows up as:
ubuntu-10.04-desktop-i386.iso size on disk 542 MB (568,475,648 bytes)
I downloaded and ran the Universal USB Installer. It shows up as:
Universal-USB-Installer-v1.7.4.exe size on disk 816 KB (835,584 bytes)
I get 56 7-zip Diagnostic messages. A small sample shows:
0 C:Documents and SettingsMy Downloadsubuntu-10.04-desktop-i386.iso
1 Data error in '.diskcasper-uuid-generic'. File is broken
[code]....
Should I download the iso file again, or have I missed something in the install? I'm running Windows XP sp3 on an IBM T60 Thinkpad
View 3 Replies
View Related
Aug 9, 2010
I'm trying to install Ubuntu 10.04 - I want it to sit on another partition along with my Windows XP installation. I don't have a blank CD handy, so I opted for the USB installation option.
I followed the very clear instructions for doing this from the Ubuntu download page [URl].. my PC skips straight over the USB drive and continues to boot into Windows XP. I tried an alternative bootable USB creator (unetbootin-windows-471.exe), but it has the same result.
I have verified that the flash drive is at the top of the boot list - I can also see the name of my flash drive flash past seconds before it boots into Windows, so the PC knows its there. I have also booted into a Live version of Linux using the same PC and pen drive before, so I know booting from it is possible - I suspect the ISO is bad? Or perhaps I'm missing something completely. I tried alternative USB ports too.
View 6 Replies
View Related
Sep 12, 2010
So here is my situation: I am unable to boot from a CD I am unable to boot from a Flash Drive I have Ubuntu installed with Wubi, and can boot into it successfully I have a Ubuntu Installation CD I have created a partition into which I'd like to install Ubuntu. Is it possible to boot into my current Wubi Ubuntu installation, and then launch the Ubuntu installer from the installation CD, and then direct this installation to the empty partition I have waiting?
Basically, I think my question is this: Does anybody know what file to run manually from the CD in order to launch the installer?
View 9 Replies
View Related
Oct 13, 2010
I have installed Ubuntu 10.10 on a 16GB USB-Stick using the Startup Disk Creator. After booting from it, I saw the progress dots running on the start screen running for ever (30 minutes until I switched off my Laptop). The whole time the in-use LED of my Harddrive was on. What is Ubuntu doing so long on my Harddisk?How can I manage, that it will work properly?
View 9 Replies
View Related
Mar 28, 2011
I'm going to be teaching a programming class to a group of middle school students, and I don't have access to install software on the computers we'll be using. At this point I don't even know if they'll be Macs or PCs, but I should be able to find out soon (and the class doesn't start until June, so I've got time to figure this out).
What I thought about doing was creating a set of flash drives with an Ubuntu installation on each one, and have the students run the computers off of the flash drives. I'd like them to be able to save their work, and I'd like to be able to set up a Python environment, a Java/Eclipse environment, and a GCC environment. I also thought it would be relatively easy to set up a single drive and then clone it for the number of computers I'll have.The course is a survey course in a number of different languages, and nothing will be particularly fancy (e.g., a few limited GUI apps, and no large data sets).Would 4GB drives be enough to set something like this up?
View 8 Replies
View Related
Mar 31, 2011
I have built a small spare computer and I dont have a cd/dvd rom. I would like to install ubuntu 10.04 from a flash drive. The bios is AwardBios 3.01. I cant seem to boot from flash drive. I disable everything in the boot menu at the exeption of "removable device". In this sub menu I have; "LS120", "ZIP-100" and "ATAPI MO". In the "other boot device" menu I have "SCSI BOOT DEVICE". I have also changed USB to "primary" instead of "auto". There could also be a chance that I havent prepared the files on the flash drive properly.
View 4 Replies
View Related
Apr 29, 2011
I downloaded 11.04 last night and installed it onto a flash drive, but after I restart the computer and select the USB to boot first, it comes up with a boot error. I tried this on another computer to see if the iso didn't install right but it works completely fine. I don't know what else to do. I tried reinstalling the iso and redownloading also just for the hell of it.
View 6 Replies
View Related
Jun 28, 2011
I am trying to install ubuntu 11.04 from a bootable USB flash drive. As i couldnt create the USB using the inbuilt usb creator which came with the .iso file i had downloaded, i had used universal USB installer to create it. It took a lot of time to created the bootable pendrive.
I had copied the contents of the pendrive thus created to a folder on my hard disk and named it 'PENDRIVE'. Later i had formatted the pendrive and used it for other purposes.
Today, i wanted to install ubuntu on another computer, so i copied the contents of this folder to my pendrive (instead of creating a bootable usb drive using universal USB installer again) and renamed my pendrive as 'PENDRIVE'. But when i tried to boot from it (i had changed the boot order of my computer accordingly) i got this message, 'remove any removable cd or media and press any button to restart'. Until i removed the pendrive my system refused to start and i was unable to install ubuntu. Why did this happen?
View 2 Replies
View Related
Aug 13, 2011
I have successfully installed 11.04 onto my existing Windows laptop as files contained in the windows system and have dual booting.I would like to copy this installation to a 5gig fast usb stick so that I can retain all my settings etc
View 2 Replies
View Related
