I'm setting up my first Linux install and I was wondering if I would be able to boot Fedora from a CD while keeping every other file on my computer, or in other words if I would be able to put the /boot partition onto a cd. I've also read that Linux can be booted entirely from a logical partition. If that's true then can anyone help me in setting that up. Mostly my problem is I already have four primary partitions, one being a logical drive with plenty of free space in it, and I can't get rid of the primary partitions I already have.
I've set up a triple boot xp, vista, and fedora 10. The problem is that I want to remove Fedora grub, so the bios can give me all 3 choices to boot from, be it xp, vista or fedora. At the moment fedora grub boots, from there i am able to choose other operating systems. But I want to use windows boot loader, from there i would like to have windows give me the choice of different OS's to boot from.
I currently have XP installed on a NetBook (Samsung NC10), and would like to run Fedora on it. I'm currently looking at putting Fedora onto a flash memory card to test it works OK on the hardware, before installing it to the hard disk. The problem I've got is that the boot sector is occupied by WDE software (TrueCrypt). Will this pose a problem for dual-booting XP with Fedora, or will GRUB move the boot loader in the usual way?
I have a server that NFS exports the /home directory out to other computers. On the desktop they all work great, but on a wireless laptop, this is where the problem occurs. The wireless enables after the person logs in, rendering the NFS export /home useless on the laptops.Is there anyway to have the wireless enable correctly on the boot so that NFS can mount properly at boot also?I'm using Fedora 11 (32bit) with a wireless router that has a security of WPA-PSK [TKIP] + WPA2-PSK [AES]. I could switch to some of the older versions if necessary to get this working.
I installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
My most recent F11 -> F12 was a near-fiasco, because I had the bad luck of foolishly having two distinct physical drives in the same system, where the /(root) partition on each drive had exact same UUID (result of partition cloning and neglect to change the UUID on the copy)
BUT! the UUID redundancy was not the initial trigger of my problems (its near-disastrousness played itself out only while I was REMEDYING the initial problem). The initial trigger: insufficient space on my /boot partition. "preupgrade" neglected to properly assess the space and/or warn me about it before proceeding.
In addition, the automatic cycling out of grub kernel entries came to bite me (part of many factors of the near-fiasco) because after the unfinished upgrade i had only one working kernel left to boot into, until I messed up that remaining one (too long a story), and then grub-install messed up my booting because of duplicate UUID. At any rate, at the end of what looked like a good preupgrade-reboot-upgrade-package-install process the post-install phase lingered a looong time, then I found myself booted into the old Fedora 11 kernel with absolutely NO modules (corresponding /lib/modules had been erased by the upgrade!) Somehow the system ran, but no USB, no wifi, no ethernet, no way to easily place the right kernel rpm onto the hard drive (had to unscrew the drive,etc., to copy over the correct kernel rpm). (Plus, file /boot/preupgrade/vmlinuz, left over from the arrested upgrade, was NOT the right target upgrade kernel version (2.6.32.9-70.fc12), so it didn't help either because it didn't have its modules either. The target /lib/modules (version 2.6.32.9-70.fc12) WERE there, but the kernel itself was NOT, due to upgrade running out of space on the /boot partition).
(Oh, and the preupgrade/upgrade had deleted my /var/cache/yum/preupgrade/ packages; hence my inability to quickly (re)install the 2.6.32.9-70.fc12 kernel rpm -- why!? it hadn't successfully finished the process!)
(Also, FWIW, i ended up rescuing the system through "rpm -i --force <kernel>", many an F12 rescue boot, chrooting, /boot/grub/grub.conf & fstab edits, tune2fs/uuidgen, running grub on command-line ("setup (hd0)"), etc., etc.)
So, any tips out there on phasing out the old-school /boot partition scheme, the safest and easiest way (without destroying a working system, of course)?
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
I have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I'm trying to install Fedora onto a computer that has Windows XP on the first of two SATA drives. Windows 7 is on the second drive.
I installed Fedora no problems on a 14 gig free space I created on the first drive and told it where and what my other OS's were. Fine so far. I didn't tell it to overwrite the MBR on the XP (first) drive. I took the second option which I "think" put the boot loader on the fedora partition.
All good - till I rebooted and I just saw my Windows 7 loader with my options for XP and Windows 7 but no Fedora.
So, if I overwrite the MBR on the first drive, will that mean I can't access my Windows 7 installation?
Dual booting Windows 7 and Fedora 15. What I would like to know is if I can change the boot order to boot Windows 7 first and Fedora 15 as other or second.
I am running Fedora 14, which I installed from scratch in a new computer.ls -l /bootshows a subdirectory also called boot andls -l /boot/bootshows what appears to be a another copy ofgrubwhich is already in /boot.It is not a symbolic link. It shows 14 of the 17 files in the /boot/grub.All of these are identical to the same files in /boot/grubwith two exceptionsdevice.map in /boot/grub shows
# this device map was generated by anaconda (hd0) /dev/sda (hd1) /dev/sdb
I have a PC with three HD's. My primary hard drive has a single partition and contains Win XP SP3. I have a second hard drive which I use to store junk (pictures, movies, etc). The third, 60GB HD, I just put into my PC and I wanted to install Fedora 11 onto it. I want to have a dual boot system with WinXP being the default boot. I downloaded the latest build of Fedora 11, created a LiveCD out of it and I tried to install the OS onto this third new hard drive. I installed the OS, I told it to use the entire third HD and to have a dual boot setup and make the WinXP OS be the default boot. The installation seemed to go without any problems. However, after restarting the PC, the PC stops booting right after the DELL screen. It gives me a cursor and that's it. It just sits there. I have tried redoing the install about 4 different times now and no matter how I change the different installation options, I get the same result. Now I can't even boot into XP even after I disconnect the third drive. I am guessing that the dual boot got screwed up; I just don't know how to fix it and more importantly, how to install Fedora, dual boot.
fedora install, system with 2 hdd's. 1st xp os 2nd will be xp pro and fedora.question is how to set up the boot sequence so that i can boot from any of the 3 os's?
I have been trying to get my Toshiba L300 to dual-boot Fedora 12 and Vista, which it came pre-installed with. I shrunk my existing partitions to create some unallocated space, then installed F12 on it from the 64bit Live CD. Everything seemed to go fine, and I was able to boot into Fedora as normal. However if I tried to boot into Vista, I would get a message to the effect of:BOOTMGR is missingRather annoyed but undeterred, I decided to cross that bridge when I came to it, and went back into Fedora to start configuring it properly. I installed the latest version of WINE, and the mp3 support, then shut down. When I tried to boot into Fedora later on, everything started as normal, then it hung on a black terminal style screen, where I can type and press return for a new line, but nothing actually happens. Pressing ctrl-alt-del restarts the computer however.
To get out of this no-working-OS-limbo, I had to break out my Vista recovery console and run fixboot. This has got rid of the bootloader and now Windows starts up fine, but obviously this does not solve the problem of not being able to boot Vista while Fedora is also installed, and not being able to run Fedora presumably (but not for certain) after I have installed WINE
i had windows vista and i installed fedora in the same HD, but now when im at the bootleader screen i got 2 options "fedora" and "other". i can boot fedora normally but i cant boot windows! i know windows still here because i can see my win files in the HD.
I am trying to install Fedora 12 using the installation DVD. When I boot the machine, I get an error message "No boot device available". I get the same error when attempting to boot from CDs and DVDs for various versions of linux, but I can boot Windows XP using a windows install disk in the same DVD drive.
The machine is a Dell 670 workstation, containing one SATA hard disk. I have tried enabling and disabling the SCSI controller, but that has no effect. The machine previously had Windows XP installed, which I deleted using "killdisk". I only want to install Fedora: I am not trying to set this up as a dual boot machine.
i have a dual boot system running Fedora14 as the main OS and WinXp as a secondary OS. On the boot up screen i choose to boot windows XP and all i get is a black screen. i am assuming the boot-loader has a small glitch and won't boot WinXp. i am stressing because i need to use MS office Access to finish a crappy school project due tomorrow.
I have installed Fedora and Windows XP. I want to remove automatic boot on Fedora because it's very annoying. remove that automatic boot or auto boot on Windows XP?
After a kernel update, the system always updates the GRUB menu, and the newer kernel is the default boot option.However, after an update on my F13 X64 system, the GRUB menu was updated, the config file still sets the default to "1" but if i left the automatic boot it will boot the previous kernel... am I crazy or missing something here?Here is my /boot/grub/grub.conf file:
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code: grub> rootnoverify (hd0,0) grub> makeactive grub> chainloader +1 grub> boot But it still maintains that "BootMGR is missing" .
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
how to dual boot XP, Win7 and F13? I ask this because I tried it a few weeks ago and I couldn't boot into XP. I installed XP, Win7 and Fedora in that order and when I tried to boot into XP from grub I got the message Code: Boot Mgr not found. Press Cntrl-Alt-Del to restart
After asking on both this forum and the Fedora forum, I felt it was safe enough to install a copy of Fedora on my working-well openSUSE drive. I have a 1 TB drive, partitioned as follows:
I did an install of Fedora 13, was VERY careful to set up the installer to put it's files in the partitions I wanted, although I did let it mark the partition as active, feeling it may have to boot during the installation process.
I had grub installed in the root of the partition rather than the MBR for both systems.
When Fedora finished installing, I rebooted the system only to find that it wouldn't. I got the dreaded "No Boot Device" message.
So, I started the 5 hour process of booting with the parted magic disk, booting with a Gentoo live disk (only one around), monkeying with the install parts of the openSUSE and Fedora disks, swapping drives to Windows to download openSUSE Live CDs (yes, both) and searching the forums and various other web sites for some poor bloke who did the same stupid whatever it was I did, and finally, as I was using fdisk on the Gnome Live CD, I noticed the warning message stating that fdisk would not work on a drive that was partitioned with the GPD format.
Notice that I have 5 partitions? That is not a typo on my part, I used the GPD format when I set it up so I could do what I did without using "imitation" partitions.
When I used parted (the command line editor on the Gnome Live CD) to change the active partition, everything started working again! Well, at least I can boot the openSUSE system, the most important thing.
It is my suspicion that the Fedora install uses fdisk to do it's work, and fdisk just mucks up a GPD formatted disk. Not the information, just the part of the drive that holds the partition table. Perhaps just the flags section. I don't know enough to say with any certainty.
I didn't change the drives parameters during the installation of Fedora, so I don't know of it even offers the GPD partitioning option. If not, I can understand how this sort of thing could happen.
Still....So now all I have to do is make the grub menu, the one installed with openSUSE, boot the Fedora installation on the next partition. Seems simple enough.