HDD name: Samsung Spinpoint F4EG HD204UI 2 TB (Internal HDD)My case doesn't allow more than 1 HDD, therefore I use a "USB 2.0 to SATA & IDE adapter".Next thing as usual with any HDDFormat and partition.HDD recognised just fine and listed when executing "fdisk -l":
Code:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
[code]...
Disk /dev/md0 doesn't contain a valid partition table
View 1 Replies View RelatedCaused by Used fdisk to delete the windows partition, in my dual boot. Then I could no longer log in to ubuntu, the partition table was some how courpt and I couldnt remount I then decided to use the windows partitioner from windows setup, as I thought it is so stupid, to reformat the partition where I had ubuntu. I wanted reinstall ubuntu, and I know that during the setup I could straighten out the mess I'd made.
Windows has now installed two 8mb one cylinder partitions on my HD. When I start the PC I get a !disk error occurred Press Crlt Alt Del to restart! This happens everytime. HD boot sequence is buggered, i guess.
I can boot from other devices. USB + CD. How when I use the windows disk to boot up I can see the 2 8mb partition, which it wont let me delete. How can I delete this via linux?
Also when I try to install ubuntu from the usb drive, it stalls just after the Preparing to install part. The next screen is when you set the partition table, swap drive etc. When I quit I get the following error !Process Glib WARNING getpuuid_r() failed due to unknown id!
The usb_liveCD does however mount my hard disk partitions and luckily I have managed to back everything up to an external.
results from df
/var/log# df
Filesystem 1K-blocks Used Available Use% Mounted on
aufs 766804 68140 698664 9% /
none 760892 244 760648 1% /dev
/dev/sdb1 3911856 712128 3199728 19% /cdrom
[Code].....
Got myself a brand new 64gb flash drive, I was partitioning it and never got it back on. Im only seeing the 7mb raw partition mounted. Thats the only thing I can see and partition! I've tried so far to create a MSDOS p.table and fdisk. It just doesnt find the 64gb
[code]....
1.After I install fedora14, I can not start window7,It shows only a transverse line shining .
2.when I comes into inux , execute "fdisk-l " ,it shows 'no invalid partition table' this two points have relationship?
USB flash disk partition disappeared as well as partition table I'm not sure about the cause
Code:
root@u# less /var/log/syslog
usb 5-1: New USB device found, idVendor=058f, idProduct=1234
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]....
Where did the partition table go? The device had one ext3 partition something around 4GB(size of USB storage device). I need to restore few files from this device.
I have installed vmware in windows server 2003 enterprise edition. When I installed I changed the default installation folder from c: drive to i: drive, as I do not have space in c: drive. After I captured red hat linux cd in vmware and reached partitioning section and continued I got a message like "an error has occured no valid devices were find on which to create new file systems, please check the hardware for the cause of the problem". The machine is IBM server....
View 1 Replies View RelatedWhat I believe has happened is that I've corrupted the partition table. Essentially one of my partitions' ending point exceeds the maximum number of cylinders/sectors on my drive.
Essentially I have the same problem as on the thread @ [url] but do not know how to fix this and am afraid to reformat/partition based on sectors without really knowing what I'm doing here.
[code]...
When I try to look at SDA in GParted everything shows up as unallocated (though it's obviously not) and it says
[code]...
I've surprisely recognized that it's possible to write a filesystem on a hard disk without any valid partition. Well, the general advantages of partitions are clearly. But what are possible disadvantages or limitaions if you don't use a partition (e.g. if you want to use the complete space as one volume for data mining or so)?
View 14 Replies View RelatedWhat is the most efficient way to match the partition tables on two different hard disks?
I have saved the partition tables using dd command in linux.
The partition tables are from a Windows system.
Is there a difference between using GPT partition table when formating hard drives and MS-DOS partition table? What are the advantages/disadvantages of using either?
View 2 Replies View RelatedI got a new ipod touch the other day and have been unable to get anything to read it properly. it automounts just fine and i can browse the file system. Normally with my old ipod i just used gtkpod and it worked fine. With gtkpod you have to tell it where the ipod is mounted. The problem is that i cannot see where the ipod touch is mounted It is connected right now and i can see it in nautilus and i can browse the file system, however...
[code]...
Partition table entries are not in disk order. what the?
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
I have tried to automate the configuration of a usb drive with not much success.
The problem that I have is that I have a large amount of usb drives that have a partition table of type "loop" and I need to change them to "msdos". The size of the drives vary and I need to use FAT32 or FAT16 file system.
I've tried various partitioning commands and gui applications but cant find one that I can give a one line command to to set the partition table, maximum partition size and file system.
I was reading another thread about someone with a bad partition table and I decided to join this forum. I'm not going to take any drastic actions with the partition (/dev/sda3) in question. I am going to wait for instructions on what to do first. I am not very good with Linux and need some hand holding. System: DELL 4550 Dual-Booted with XP and Ubuntu. Works OK, just no swap. Well, here's what I did: I deleted a partition for Windows XP Pro because it was a trial, and it ran out. I then decided to slide the swap partition for the Ubuntu Linux that I dual-boot into over. (If this was successful, I was going to try expanding the root partition to take up the unused space.) I used Gparted on a CD to do this, as I figured it was safe to do.
I now cannot mount the swap space at bootup (and have to go into a backup version of the OS), although I can use Gparted in Linux to execute the "swapon" command, and it appears that it worked because I now see "swapoff" as an option on the context menu. (I actually don't even need a swap partition, except to hibernate.) If I highlight the swap partition and click on "Drive" on Gparted's menu bar and select "Create Partition Table", it will erase all data on /dev/sda, so how do I fix the bad partition table non-destructively?
Everything is installed and setup on my system, but when I setup my partitions I chose my Windows partition to be bootable. Can I just use cfdisk to toggle the bootable flag so my linux partition is bootable and rewrite the partition table?
View 2 Replies View RelatedI want to change my sda2 partition to ntfs type. i have installed GParted but it is returning a strange type of error. Here is the error dump file...
[Code]...
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
Is there a program that will reread the partition table and update the kernel even if one of the unmodified partitions is mounted? I installed my system on one partition, then I added another with free space. Now I want to format the second partition, but the kernel doesn't know about it yet. I tried sfdisk -R /dev/sda, but it refuses while the root partition is mounted. Is there anyway I can avoid rebooting?
View 2 Replies View RelatedI'm trying to clone a Linux install to a different laptop. It's made a little complicated by two facts:
1) The 'new' laptop I'm trying to copy my Linux installation to is actually older and has a smaller hard drive then the computer I'm copying from
2) The computer I'm copying from has both a windows and Linux installation; I only care about the Linux partition.
I figured I would copy only the Linux partition from my primary computer to the laptop, sense the laptop doesn't have a large enough hard drive to copy everything. So I used the DD commands to copy SDA3 (main Linux partition) from my main computer to SDA2 of my laptop. When I came back a few hours later I was surprise to find my laptop trying to reboot itself (I never turned it off). It would keep starting to reboot, failing, and restarting itself. Not too surprising sense its boot partition wasn't changed so it's trying to boot into centos when I copied a redhat partition to it.
The problem is that when I used a redhat boot disk the rescue mode was unable to find a Linux partition to mount. /dev/sda2 exists, but trying to mount it gets the complaint "No such file or directory". "fdisk -l" lists sda1 (the boot sector) and sda2. Sda2 is the correct size and reports Linux LVM for its system. But "fdisk -l /dev/sda2" gives the error message "Disk /dev/sda2 doesn't contain a valid partition table" Did I not clone the drive correctly, or was an error caused due to the boot sector not being copied yet (the laptops boot sector is smaller then my old computers, so I can't copy from old computer to laptop)? Can I salvage the laptops partition table somehow, or do I have to repeat the cloning process? And if I do have to re-clone my computer can anyone tell me what I did wrong the first time so it works this time? I don't care if I copy just the Linux partition or both windows and Linux. Even though my main computer has a larger hard drive I'm only using about half of its available space so it should be possible to copy both partitions if I could ignore the unused sections of the harddrive.
Edit: I used DD to copy a tiny part of the Linux partition from my laptop so I could look at it. Most of it is illegible binary of course, but I scrolled through till I found some text right near the beginning:
Code:
VolGroup00 {
id="F2MWxh-....-BidcLe"
seqno = 1
[code]....
So it seems that the DD command did copy everything over to the laptop, which is good to know. I noticed that it says device="/dev/sda3" right in the middle of the code I just posted. The Linux section of my original computer was SDA3 but I copied it to partition SDA2 of my laptop. So is the problem because the boot partition is for the wrong device? I don't suppose if I modified that one line to say SDA2 it would be able to load correctly? (Not that I know how I would modify the line, short of using the DD command again).
Attempting to move from Xen to VMware, have dd old xen disk to image file and loaded in vmware. The disk is visible when running from a knoppix rescue disk however it can only be mounted as /dev/sda
On the Xen vm fdisk -l shows /dev/sda as:
Disk /dev/sda1 doesn't contain a valid partition table
This also reflects in the DD image. I'm assuming this is because it was part of a volume group ?? on the Xen Server. As it is mounted as /dev/sda on the knoppix rescue cd I can't run grub or seem to mount it as /dev/sda1 after recreating the partition in fdisk. How can I reinstall grub on this and get it to boot ?
In my efforts to resize my BTRFS Partition, I accidentally unmarked my BTRFS partition as being BTRFS, and can't mark it back as I can't find the numeric ID for BTRFS and how to apply.
View 1 Replies View RelatedI've successfully built a library I'm using on Ubuntu Linux 8.04 (both x86 and x86-64) and now I'm building it on SuSE Linux 9.1 (x86-64). I set the environment variable required for the make script exactly as I set it on the other Linux computers. When I run the make script, I get an error citing that $DEVDIR, which is the root development directory, is not a valid directory. Here's the pertinent part of the script I'm running:
Code:
#!/bin/sh
if test "$DEVDIR" = "" ; then
[code]...
My server gets ddos attacks. I dig into access logs and I saw that attacker ips doesn't have valid requests headers, like their browser application info or requested url info.I want to close those connections immediately, and if it's possible block those ips for a time period.Can I do that with Apache and iptables?I searched on the internet but couldn't find useful results. Probably couldn't search for the right words.
View 2 Replies View RelatedGNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
I was changing some file permissions with the chmod 777 command and i accidentally executed:
Code:
sudo chmod 777 /*/*/*/*
and now i can't get root access to anything. If I try executing a sudo command i get:
sudo: /etc/sudoers is mode 0777, should be 0440
sudo: no valid sudoers sources found, quitting
I installed Ubuntu as shown in the wiki and when I went to restart it gave me a lovely blinking cursor and nothing else. So I held down option, loaded into osx, reinstalled rEFIt and got my menu on startup. Unfortunately, the partition sync tool doesn't seam to be working, it gives me an error: Status: MBR partition table is invalid, partitions overlap. Error: Not Found returned from gptsync.efi
View 9 Replies View Relatedwe had a CENTOS 5.5 x86_64 machine with 8ered with MySQL 5.0.91-community.Currently we had a very high number of Created_tmp_disk_tables (31k in 4,5 hours!!!).I've read suggestion that we need to increase tmp_table_size, and we've set tmp_table_size to 64M, but this drupal modul's query still cause mysql create tmp table on disk
Code:
SELECT DISTINCT node.nid AS nid,
comments.subject AS comments_subject,
[code]...
I originally had an Ubuntu partition on my hard drive which occupied about half of it. I installed Windows 7 in the remaining unallocated space and I was planning on doing a grub update from a live cd afterwards. BUT when I looked at my partition table, the space where the ubuntu partition used to be is now unallocated space!
View 5 Replies View RelatedI need to copy partition table for sda, I have 3 primary partitions and 1 extended partition on sda. I understand that fdisk cant copy extended partition table and I need to use sfdisk.
Correct me if I am wrong -
1. For primary partitions
Code:
dd if=sda-mbr.bin of=/dev/sdX bs=1 count=64 skip=446 seek=446
2. For extended partition
Code:
sfdisk -d /dev/sda2 > backup-sdX.sf
Where it will store the files after backing them up. I tried SUSE 11.2 DVD, it has back up partition table utility under repairs-advanced options but it suggests saving partition table to floppy. Why it doesnt offer to save it on a removable medium or to CD.
