Hardware :: All USB Ports Disabled - Cannot Open In BIOS
May 4, 2010
I have Ubuntu 10.04 installed on an Asus x83v. About a month ago, my laptop began taking a very long time to boot up, assuming it booted at all. This happened out of the blue for no apparent reason. I found that boot up was faster when I unplugged all USB devices, though it was still a slow process. When I plugged devices back in, they did not work. My iPod was not recognized, nor was my USB mouse. This was extremely frustrating, but I figured it must be an issue with Ubuntu 9.10, and with 10.04 just around the corner, I figured I would upgrade and then see how things were. To make a long story short, it was all the same. With some research, I found that my USB ports were inexplicably disabled.
Here is the output of lsusb:
Code:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
This is with my USB mouse plugged in.
I went into BIOS and found that USB was enabled. However, on the rare occasion that my computer boots successfully with a USB device plugged in, I get a message like this from Ubuntu prior to reaching the login screen: "Unable to enumerate USB device, Port 002 disabled". I suspect I may need to reinstall my BIOS, however I am at a loss as to how to do so.
View 10 Replies
ADVERTISEMENT
Sep 3, 2010
When I moved from Fedora 13 from Fedora 11, I thought the annoying application crashes that I had been having were gone for good. Random crashes - firefox, Thunderbird, Abrt, metacity and what have you with SIGSEGV errors. I'm beginning to believe that these are not down to Fedora or even the RAM (Have run Memtest, several times). I'm not sure if what I am seeing are signs of IRQ conflicts of some sort. Can someone, please have a look and give me some guidance on what to do? Should I reinstall with acpi=off ? noapic? Also, don't have a clue why the system complains of ECC being disabled? The RAM is non-ECC. I have posted some sections of the logs here with links to the full logs instead of making this a massive post.
Code:
EDAC MC: Ver: 2.1.0 Aug 27 2010
EDAC amd64_edac: Ver: 3.3.0 Aug 27 2010
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
Complete system spec, BIOS details etc.
Full dmesg log on a fresh install. No issues experienced with system installation.
View 2 Replies
View Related
Sep 26, 2010
I've played with Ubuntu, and a linux evangelist at work has talked me into trying it again.I happened to be wiping my machine, so my plan was to have Windows 7 and Ubuntu on one hard drive (100GB for Ubuntu, the rest for Windows), and the second hard drive for downloads, TV, films, etc.First I installed Windows, then I torrented the x64 Ubuntu 10.04 live CD iso, and burned it to a DVD. I booted from it and installed on the second partition, but I then found when I booted back into windows that my second hard drive wasn't there any more.
It didnt take long to work out that Ubuntu had installed using the second hard drive as a mirror. This is very confusing to me, as I've disabled RAID in my BIOS. I booted from the Ubuntu CD again and looked for options about this but didn't find any. Eventually out of frustration I just unplugged the second hard drive, but now when I boot from the CD to install, no hard drives show up for me to install to.
View 4 Replies
View Related
Jul 24, 2010
I'm running SUSE 11.3 on a Dell Inspiron 1501 with a Broadcom BCM4311. I finally got the wireless working earlier with some help from caf4926 and now the card keeps disappearing almost like someone went into the BIOS and disabled it.
View 7 Replies
View Related
Dec 5, 2010
I am having problems understanding how sound capable devices are being used on my Ubuntu10.10 64 bit system. I have an ASUS A8V motherboard with on-board multimedia functions provided through the VIA V8237 chip. BIOS gives me the option to disable this functionality and I have set BIOS this way. I want to use an M-Audio 24/96 card for all sound processing.
However, in applications like Audacity the VIA chip functions are all available and can be set as recording and playback devices. The same is true in ALSA.
Why does 'linux' (I have no idea which part of the OS) ignore the BIOS settings?
Furthermore alsamixer always selects the 'default' devices. Where and how are these set?
<System><Preferences><Sound> hardware tab list 2 'Internal Audio' devices but no M-Audio device. What are these devices? Only 1 of them appears to create any output with the 'Test Speakers' tab. This confuses me completely because the speakers are connected only to the M-Audio card.
None of the profiles for 'Settings for the selected device' match the capabilities of the M-Audio card (1 set of stereo inputs and 1 set of stereo outputs). So where are these profiles coming from? Which do I select for the M-Audio card?
What do the Input and Output tabs in <System><Preferences><Sound> mean? Are these different to the hardware tab? The 'Output' tab lists2 devices for sound output: 'Internal Audio Analog Stereo, Stereo' twice. What devices are these ?
View 6 Replies
View Related
Feb 2, 2010
Just did a check on "shields up" and it says that ten of my ports are open. I get the same result with or without both shorewall and firestarter. I suspect it may have something to do with the mysql server packages added automatically during installation. Am I right. If so, what can be done about it? If not, has anyone any idea how to keep my ports closed?
View 5 Replies
View Related
Feb 7, 2010
I'm trying to setup oracle10g but, whenever I try to go to my database homepage http://127.0.0.1:8080/apex I get an "unable to connect to" error. Only reason I can think of as to why I can't connect to it is because my ports aren't open. I also recall SELinux complaining about something awhile ago, I can't seem to bring that up any more for some reason.
View 1 Replies
View Related
Mar 28, 2010
I've been struggling for days trying to open port 53 and 25 but can't get it to work. My iptables at /etc/sysconfig contains the following:
# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0] .....
On the server machine when I do port scan with nmap I see the following result:
Starting Nmap 4.76 [URL] at 2010-03-28 01:03 CET
Warning: Hostname localhost resolves to 2 IPs. Using 127.0.0.1.
Interesting ports on localhost (127.0.0.1):
Not shown: 986 closed ports .....
But when I try to do telnet from an external machine, e.g:
telnet <IP of host> 53
I get:
Connection refused
telnet: Unable to connect to remote host
I also did a port scan with a tool on an external machine but port 53 and 25 weren't listed as opened ports. Also CheckDNS.net on the server returns "Connection reset. Probably DNS server is offline". I am 100% sure that named and sendmail are running. When I do a ps -aux I see:
named 9261 0.0 0.3 85528 14784 ? Ssl 00:46 0:00 /usr/sbin/named -u named
root 2550 0.0 0.0 9536 1960 ? Ss Mar23 0:02 sendmail: accepting connections
View 14 Replies
View Related
May 8, 2010
how can i close all of ports and open ssh only?
View 6 Replies
View Related
Apr 6, 2010
A few months ago I installed Ubuntu 9.10 on my girlfriends laptop, on her request, as she didn't like Windows any more. Since then the internet connection periodically slows down due to too many open ports/connections. Always when this happens I call our ISP and usually there are around 80-200(!) active connections to various IP's.
She is not downloading torrents or anything.
She only uses Firefox and a few open tabs as people do.
Skype is open.
Wireless internet connection.
I am thinking either Ubuntu is updating more or less constantly or the ports/connections aren't closed "after use".
View 7 Replies
View Related
Jul 27, 2010
I'm locking down my laptop. I know I can use a firewall to ensure nothing gets through that I didn't catch, and I certainly plan on using one, but in the meantime, I want to know what exactly is running on my system.
nmap localhost returns:
Code:
james@james-linux:~$ nmap localhost
Starting Nmap 5.00 ( http://nmap.org ) at 2010-07-26 23:33 CDT
Warning: Hostname localhost resolves to 2 IPs. Using 127.0.0.1.
Interesting ports on localhost (127.0.0.1):
Not shown: 994 closed ports
PORT STATE SERVICE
25/tcp open smtp
111/tcp open rpcbind
139/tcp open netbios-ssn
445/tcp open microsoft-ds
631/tcp open ipp
2049/tcp open nfs
Nmap done: 1 IP address (1 host up) scanned in 0.18 seconds
However, I know that localhost goes back to the loopback interface, 127.0.0.1. So, to see what was really open, I ran nmap 192.168.0.108, which is my laptop's IP at the moment.
Code:
james@james-linux:~$ nmap 192.168.0.108
Starting Nmap 5.00 ( http://nmap.org ) at 2010-07-26 23:33 CDT
Interesting ports on 192.168.0.108:
Not shown: 996 closed ports
PORT STATE SERVICE
111/tcp open rpcbind
139/tcp open netbios-ssn
445/tcp open microsoft-ds
2049/tcp open nfs
Nmap done: 1 IP address (1 host up) scanned in 0.14 seconds
Now if I understand correctly, I can attribute 139 and 445 to my Samba share. That I'm okay with. What I don't know is 111 and 2049. Does anyone know what these ports are, what's running on them, and how I could turn them off, supposing that they are a security risk?
View 9 Replies
View Related
Mar 18, 2011
I'm getting heat from the head networking office that ports 21, 110, and 143 are open. I can telnet to those ports from a remote machine (not localhost) and get a prompt. There does not seem to be anything listening on those ports according to netstat. I've tried using iptables to discard all traffic to a from those ports but I can still telnet to them. This is a lucid desktop machine.
View 4 Replies
View Related
Apr 5, 2011
I'm trying to open my ports all the way, but for some reason, I am unable to do so. I've forwarded the ports I want open in my router (I switched between two routers to make sure), I made exceptions in Firestarter, and I even added UFW rules, but when I use pretty much any and every port checking tool out there, the ports eithere back stealthed or closed.I'm not a complete noob, and I'm not an expert, but I'm p sure I'm doing everything right, seeing as there isn't much to screw up.The reason I'm trying to fully open these ports is because I'm getting this dumb 'No Incoming Connections
View 3 Replies
View Related
Apr 5, 2010
I'm using ubuntu-linux ( ubuntu 9.10)I use utility autoscan network to scan the systems available in local area network of my hostel.It shows my open TCP ports : like Ssh , Smtp , Http , NetBios-ssn , Microsoft-ds , ipp , Mysql , Postgres.Are all these services need to run all the time or I can manage the ports.Don't know much about it just want to know these ports are by default open or I can manage them.
View 7 Replies
View Related
May 14, 2009
Since there was no response on my other post which i spent about a hour writing, ill go for something simpler. I run this on my server
Code:
# set default policy for the NAT table
iptables -t nat -P PREROUTING ACCEPT
[code]...
View 9 Replies
View Related
Jan 30, 2010
I would like to open some port from IN to OUT pop3,smtp.whenever i tried to add some rules to existing iptables it gives me an error.Applying iptables firewall rules: iptables-restore: line 21 failed
View 7 Replies
View Related
Apr 10, 2011
I am new to Linux. I am installing oracle OBIEE 11g on Linux Red Hat 5.6 64 bits and I got stuck at ports not open error.
I tried adding the following line in the iptables file:
Then Restart iptables service, But did not have any success still getting the same error.
How do I open ports on my server.
View 3 Replies
View Related
Dec 2, 2010
I cant get any of my usb ports to open ,m trying to open my "usb external hard drive .
View 2 Replies
View Related
Nov 14, 2010
Went to open up the BIOS on my Dell and for some reason it won't go to the BIOS.
I've done it...like a hundred times before... tried...like fifty times...and it just goes to
windows.
Anyone have any thoughts?
View 1 Replies
View Related
Oct 20, 2015
I have installed Debian Jessie (<-- brilliant OS ) on my uncles Laptop (it is a Thinkpad E540) with Cinnamon as desktop environment. The installation was no problem. Everything apart from one minor thing works nicely. The minor thing however is the following:
I don't know what it is, but when I don't use a particular usb port for a while and then try to plug in a usb stick or a wacom tablet, it doesn't get recognized, it doesn't show up when I use f.e. Code: Select alllsusb. When I close the lid of the laptop and open it again, then the particular usb device gets recognized and cinnamon asks me what to do, f.e. open a folder and show the content of the usb stick I have plugged in. Because of the success on two other laptops I use the following
Code: Select all# /etc/systemd/system/powertop.service
[Unit]
Description=Powertop tunings
[Service]
Type=oneshot
RemainAfterExit=no
ExecStart=/usr/sbin/powertop --auto-tune
Environment="TERM=xterm"
[Install]
WantedBy=multi-user.target
to save power on the Thinkpad (this is in no way my service script, I tuned everything using powertop in the terminal after having had logged in, the script above stems from a brilliant user here on the forum). Could it therefore be autosuspend that is not working properly here?
View 3 Replies
View Related
Sep 9, 2011
I have just switched over from firestart to gufw.I have set all incoming traffic to deny and all outgoing traffic to allow.I have rules set for incoming traffic, and have only opened 1 port on my system for torrents. My router also only has the same port opened which again is for torrents.I use "Network Tools" which is included on squeeze and do a portscan of 192.168.1.100 and 127.0.0.1 I get all kinds of crazy ports coming back as opened. What is even stranger is if I do a few scans, these ports change, so one port on one scan may come up as open, then it will disappear and a different port may show as open.
Mind you none but the torrent port is forwarded in my router, I have no idea what any of these other ports are, or why they are even showing up.What the heck is going on? I dont think this is normal? Am I at any higher risk for attack?
View 1 Replies
View Related
Jan 23, 2011
how to open firewall ports without using yast. The reason I'm asking is because I'm working on a .sh script for the installation of a couple of programs. Some ports need to be open for the programs to work, I find it really annoying to go to yast and type the ports manually every time. I've looked at /etc/sysconfig/SuSEfirewall2 but can't seem to find anything, I also know that after the changes I will have to stop start the firewall by running:
SuSEfirewall2 stop
SuSEfirewall2 start
View 4 Replies
View Related
Feb 4, 2010
Does Ubuntu come with a firewall preinstalled and running? I need to open port 9997 - how would I got about doing this?
View 2 Replies
View Related
Apr 10, 2010
I installed Ubuntu 9.10 recently. I heard that there will be no open ports in the system unless I specifically open one. How do I scan to find a open port in my system.
View 9 Replies
View Related
Jul 6, 2010
when i enable my ufw it completely shuts me out and closed my internet connection. i installed firewall configuraiton interface and through it defined rules to accept incoming internet connections on port 80, i can see the rules are there but when i enable my firewall it just shuts me out completely again.
when i do(with my firewall enabled):
Code:
$ sudo ufw status
it gives me:
Quote:
Status: active
[Code].....
I also messed around with fwbuilder and iptables but since then deleted fwbuilder(besides i just compiled firewall policy and never actually installed it because of errors while trying to install it. Iptables I cleared with:
Code:
$ sudo iptables -F
View 9 Replies
View Related
Dec 15, 2010
"Ubuntu Server has no open ports by default" - [URL]. Does this mean right after a 10.04 Server Edition installation, if a user wants to start a web service e.g. a Java process to listen on say port 8080, he would have to configure the firewall first?
View 1 Replies
View Related
Jan 2, 2011
I have been running Ubuntu 10.10 and have found that at any time I am connected to the Internet that I will randomly see high port numbers open when doing a port scan on my computer all are in the unknown listings with five digit numbers so I don't know what is going on or who is using them. Please check your system to see if you are having the same thing happen by using network tools and filling in your local ip address in the port scan tab. If you shut down your Ethernet interface and run port scans the high ports are no longer open. this will at least keep whoever is using your ports at bay when you are not using the net.
View 4 Replies
View Related
May 28, 2010
What UNIX command do you use to find out the open ports in a system?
View 1 Replies
View Related
Dec 26, 2010
How to list Open ports on Linux?
View 3 Replies
View Related
Apr 16, 2011
I scanned my home machine (windows vista) with Nmap, after disabling the firewall and all ports came back with the status as unknown (No Open Ports). Why no ports are showing as open?
View 3 Replies
View Related
