I have on board sound which is usually fine.. But I recently added another sound card, crap ac-97 jobbie, for a joystick port.
Now karmic can play audio from say radio2 stream, no prob, but vlc i get no sound, in movies. how can i tell it on board for sound. it nvidia on board, so should stand out. also while we are at it, whats the modprobe, for joysticks? have not done them for years...
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I have to recreate a new version of my old thread about my laptop Lenovo Thinkpad EDGE(13) sound trouble. At this point I simply have no clue and tired of trying to fix it. Well after reboot I have no sound in movies, only mp3 has sound, and I can play them via any player. Well to make my video have sound I have to always yast>sound> and manualy setup my Azalia(HDA intel) driver "Fix DMA pointer" to "0" value and my "Use single command to communicate with codecs" to "0" value also, then everything starts to work until next reboot. I don't know why the config is reseted always. I installed new kernel even in hope that my soundcard would work properly, but nothing changed. I reported a bug even, but dunno whether it will be fixed or not, now, if I can write my sound config manually and save it so it is not reseted or anything. Or maybe I can write a script that at autostart will write the desired config for my soundcard, just anything. I'm frustrated at this point, coding as I don't know bash, so I cant do it myself, I need code so I could make a script out of it.
View 5 Replies View RelatedI bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedI installed Mangler and one of its requirements was pulse-audio. I installed pulse-audio everything worked great except i couldn't get sound out of wow if i started mangler first and vice-versa. I then found a version of Mangler that worked with alsa. So i uninstalled mangler and pulse-audio, installed mangler-alsa. Everything works great now. The problem is when i uninstalled Pulse-audio i lost all my sliders in Yast > Hardware > Sound > other > volume. The only thing that shows up is master volume > Test. My sound works great just can't adjust anything. How do i get my sliders back. I would like some advice before i screw something up. (lol) My Sound card is according to sound configuration SBx00 Azalia(Intel HDA) - Driver snd-hda-intel.Opensuse 11.2 KDE 4.3.5
View 2 Replies View RelatedI have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
sound card is working well inside SuSE and everything is ok there. But when I install Windows 7 or XP inside Xen Virtualization software, I can't use sound card and Windows is unable to find any sound hardware.
View 1 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
trying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
this is my kernel:
uname -r
2.6.26-2-686
and this is the result of lspci:
00:00.0 Host bridge: Intel Corporation Device 0044 (rev 02)
00:01.0 PCI bridge: Intel Corporation Device 0045 (rev 02)
00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06)
[code]...
I seem to be having sound issues on CentOS 5. When I run the sound card configuration, my sound card is recognized and the test sound plays fine but there is no sound coming out of any applications. This just started today and I have made no changes to my computer or installed any new software.
Below is the output from lspci :
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
A friend has intalled Linux after a load of problems with windows. He very kindly installed my Edirol UA25 soundcard, and when i click 'test' on System-preferences-sound, it indeed plays a sound. The problem is that when I try to play anything from the internet on firefox, or any sounds in VLC, or any other application, it doesn't work. I believe I'm running Ubuntu Studio, version 8.04, but I am not sure. I have an Athlon 64 bit processor if that's relevant.
View 4 Replies View RelatedI'm trying to use an application (e.g., mplayer) to play sound that comes in my sound card (via the mic jack). (What I'm really trying to do is sync a sports broadcast by putting a delay on AM audio, as described here. I'm stuck at the part where it says "this shouldn't be too difficult".) I've seen some hints that there might be code-heavy solutions using LADSPA or some JACK SDK, but there's just gotta be a simpler way. I'm hoping for something like
Code:
mplayer -delay -7 - < /dev/mic
but I'm darned if I can find it. I'm sure there are plenty of other sports fans who would find this useful for syncing radio with the digital TV feed...
I'm running WinXP Pro on a Dell XPS 710 with a Creative X-Fi sound card. Been away from Linux for a year or so since I got this machine and would like to come back. Can you suggest/recommend a sound card (5.1 preferred) that has a high success rate with the Linux OS. I will probably install Open Suse or Kubuntu. I'm more than willing to dump the high end sound card for less flash.
View 3 Replies View RelatedMy usb sound card has been identified by alsamixer, however it won't make any sound when i put headphones in it. The volume is up, I know the sound card works.
View 1 Replies View RelatedNew Ubuntu installation with a big problem: no sound.
OS: Ubuntu 10.4.1
Hardware: HP Pavilion Elite e9150t (64 bit)
Sound card: Creative Sound Blaster X-Fi Xtreme Audio
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
[Code]...
I'm relatively new to debian, but an intermediate linux user. I've just installed wheezy and I'm having trouble setting sound up. When plugging my headphones in via the motherboard, sound works fine. Great. I plugged in my USB Sound Card (Audiobox 44VSL) and no dice. It's set as card 1 under aplay -l, yet no sound. I know this box works on GNU/Linux because I used to use it in Xubuntu a couple years ago with no problems at all.
View 2 Replies View RelatedMy PC has the ASUS P7H55-M SI motherboard with the audio chipset VIA VT1708S. Under Fedora 13 (64-bit) I have no sound although the audio chipset seems to be properly recognised and supported by the OS.
I used the alsmixer application and I set the volume for all channels, including PCM to their maximum value but still I get no sound. When the OS boots I hear a "click" sound coming from the audio chipset when it is initialised by the kernel but then the sound stops and I hear nothing.
Note that I do not have this problem with Ubuntu 10.04 but I have the same issue with openSUSE 11.3 Milestone 7. My guess is that F13 and openSUSE 11.3 having newer kernel/alsa software versions exhibit this problem due to some bug introduced to the code.
Here is some extra information:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
[Code].....
I have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it. The laptop is a Compaq Presario CQ45-307tx (more specs at link below) [URL] The first thing I tried was I updating the alsa firmware using the konsole command "zypper install alsa-firmware". The firmware updated fine, but still no sound. The next thing I tried was editing a file based on the advice found at the link below. [URL] This didn't work either, but I wasn't too optimistic to begin with due the differences between our systems.
View 7 Replies View RelatedI have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu on a desktop, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it.
The laptop is a Compaq Presario CQ45-307tx (more specs at link below)
Product Specifications Compaq Presario CQ45-307TX Notebook PC - HP Customer Care (Brazil - English)
Here is the ALSA support url per the instructions in the multimedia sticky [url]
Just installed an Asus Xonar DS sound card. Installed the latest ALSA 1.0.23 drivers. The new drivers see my sound card just fine:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
I messed with some settings (not exactly sure what I did) while trying to get a USB headset to work, and now I have no sound at all. It's acting like it doesn't recognize any soundcard (I'm using a Thinkpad W510 with integrated sound).
View 5 Replies View RelatedMy sound card infomation:
Intel 82801I (ICH9 Family) HD Audio Controller
nVidia Audio device
In my ubuntu 11.04, the sound seems not so clearly, seems something bass.
It's OK in windows 7.
I don't know how to config the sound card, or, is there any drivers updates on my sound card?
I'm setting up a new PC and hope to use the Planet CCRMA packages for some simple home recording projects. The PC has a 64-bit processor, so I've installed the x86_64 version of Fedora 10. I've done the basic steps of adding the Planet CCRMA repositories and installed their real time kernel, so I'm think I'm ready to try and get started. First, I need to get my sound cards set up right. I have an M-Audio Delta 1010LT card, which I'd like to use for working with music and the Intel HDA card built in to the motherboard, which I'd be happy to use for things like system notifications and other incidental sounds. Here is what the system tells me about the cards:
[code].....
The only ones that produce any sounds when I test them are the HDA Analog device and the Delta 1010 device, but the weird thing is that output seems to be coming out of the built-in output jack (on the motherboard) in either case. Does the OS route output from the Delta 1010 through the built-in card to its output jack? Also, I've connected only the first two RCA analog outputs from the Delta 1010 to my desktop speaker system - should I use a different pair of outputs for testing? Playing a CD directly from the CD drive works, but playing music files from Amarok does not. I'll leave it at that for now. I posted the information above to the Planet CCRMA mailing list threee days ago, but I haven't gotten any responses.
I was just given a computer from a coworker and installed the latest Slackware version on it. I then installed Gnome Slackbuild and installed the Nvidia driver.I've run alsaconf and it seems to run fine without any errors and unmuted all the channels in alsamixer.
View 6 Replies View RelatedI have dual boot (win xp & Xubuntu) there's no sound on Xubuntu 8.04. I had Ubuntu before and it could see the sound card normally without even installing anything.
so what should I do now? My sound card isn't old..it's realtek, I don't remember the exact model though.
