i logged to recovery mode and changed the pass word successfully(?). yet i could not log in with the right user name and right password. what's happened?
View 1 RepliesI want to add 50 new users, not on the server yet I want to add them all to group Accounting - with 1 option, not user by user I want to setup a default password for them all, and have it say something like 'You must now change password or no access will be permitted' Any other options I also want to do once, not for each user?
View 3 Replies View RelatedI am using mint 8 for a 2 weeks, I am noob to linux but I like Mint than any other linux distro which is great alternative to windows. I have a problem regarding password reseting.
1. My laptop automatically get logged in without asking user name and password.
2. I tried to change password for newly created user and root user using graphical way but it does not work.
2. I can perform administrator task using only OEM user which is default inbuilt user of mint.
How can make my laptop to ask password when mint get booted? How to change password for other users?
How do I disable and change the user password using SSH on a Linux
View 3 Replies View RelatedHow to reset FTP user password?
1) In the /etc/passwd file user is not available.
2) In this linux box VSFTPD is running.
A friend of mine can't remember her password for the computer.When the computer starts it automatically loads her user profile, i can't create any new users, and i cant become root with sudo, i looked around on the forums and some stuff was very helpful in teaching me more about linux, but without being able to change, or remove the password i cant update. the laptop is a dell 910 mini.
At the terminal, instead of being: User@localhost, it's : name@name
i have tried what user name and password i can think of but still no answer. i can get into root and was hoping that i could find it in there. But no luck so far
View 2 Replies View RelatedI use the ssh-keygen -t rsa to release user to connect another server without input password , but it seems only release to a specific user , can advise if I want all user can login a specific a/c in remote server without input password , what can i do ?
View 6 Replies View RelatedI have shared keys setup on my domain, so I never type my password to login anymore.
I've forgotten my password now. This is a problem because only my user can sudo. Password authentication for root has been disabled, so without my password, I cannot do maintenance on my web server.
Is there a way to reset my password as my [now only] key-authenticated user?
Specifically, can this be done on CentOS 4?
How can a user be setup to sudo (or su -) without entering a password?
View 1 Replies View RelatedI want to know how to change a password to an user account. Can someone give me the syntax on how to do this? I was using usermod but it's not working (usermod -p 123456 user1). Is there other way beside usermod? I am using RHEL5.
View 3 Replies View RelatedI've gave my son (7yrs) my old Eee PC 4G and he changed by istake the user password and forgot the new password.How can I overwrite the password?The only password I have is the BIOS Supervisor password...What can I do?Easy fix is preferred because I've no clue re Linux.Even formating and reinstall would be an option. (all data are on SD)I could boot from USB or SD but don't know what program I need and were to get it from
View 5 Replies View RelatedUbuntu 8.10 does not ask for a password to login. I have only one user set up. I have set the user password from System > Administration > Users & Groups. Still does not ask for password > logs in straight away.
View 2 Replies View RelatedI have installed Knoppix 6.2/6.4, on the whole hard drive, when I want to change, e.g. my location from America to UK. I am being asked for a user password. On install there were no menus to put these passwords, unlike Ubuntu, which I am using at the moment, in and location etc. Once installed there is the Knoppix menu to add a root password, no problem, but when I put the root password in, on user password ,it wont accept this.
View 1 Replies View RelatedI have just burnt ubuntu to a cd and am trying to use it on a seperate laptop it boots fine but then asks for a user and password i have not set up anything like this on the link above they suggest just clicking enter or waiting for it to time out however neither of these have worked
View 10 Replies View RelatedCannot change a user password om mysql Trying to change the cactiuser password but no luck so farThis is what I did:
mysql> use mysql;
Database changed
mysql> SELECT host,user,password FROM user where user='cactiuser';
[code]....
I've been trying to figure out how to set up vsftpd on a test machine to emulate the ftp setup on our current ftp server. I was able to track down part of what I needed with the gracious help of poster AlucardZero on this forum, who pointed out that the vsftpd process likely being run via xinetd.
I've managed (or so I thought) to set everything up correctly - but I cannot connect to my test box as the user the ftp client program we're using expects. I can see in the vsftpd log that I'm making contact, but the client program is automatically failing, and attempts to get in from the Windows command line (ftp <ip>) request user and password, then fail out with '530 Login incorrect'.
Everything I've seen online so far indicates that the ftp login for a local user (with vsftpd configuration settings including anonymous_enable=NO and local_enable=YES) should be the same as the 'normal' login for that user, and that the passwords should be the same as well. This is the case on the current FTP server, where a Windows command line login uses the same password as attempting to su into the user in question. On my test machine, I can su into the user in question with the password as well. I simply cannot seem to connect with this user via ftp.
Below are the things I've found so far during my search on the two servers:
Code:
I'm obviously missing something simple, because I've read many posts on this site and others concerning successful setups - I simply haven't managed one on my own. Most of these eventually boiled back down to this howto page, and I've tried to follow the 'add and change user' instructions shown there to no avail.
I need to run one command as different user with out a password prompt.
I did this
Code:
one localhost= (two) /usr/bin/whoami
This work but it prompts for password. Is there a way that can be done with NOPASSWD option ?
i changed my password and whenever i log in i get a message that ur login keyring password and user password do not match, so how do i change my login keyring password!!
View 1 Replies View RelatedHow to recover user password and root password in fedora if u forget
View 2 Replies View RelatedMy bose ask me to convert a CentOS system password like "LMPQSMTE0nHlQ" to postfix MySQL MD5 Hased password, I find CentOS seems has 2 kinds of password form, one is shorter and the other is very long like"$1$C2MSk16n$WT5JWnzYH7XpCCjsiE2bd1", however I find postfix is exactly the later long one, so does any one know how to convert the short form to the later one
View 1 Replies View RelatedI'm trying to create a user john with default password 'abcdef'. I used the following command.
useradd john -p abcdef
I can't login with the password. in /etc/shadow file I can see the password in clear text format. how I can create a user along with password.
I am trying to change the password of a user by 'usermod' command. let us assume that there is a user named "test" to change the password of the user we can type "passwd test" which will change the password of the user "test". I want to change the password similarly using the command "usermod". when I give usermod -p yahoo test"(yahoo is the password which I want to set), I am not getting any errors but when I switch user to test, I am unable to login.
View 1 Replies View RelatedI'm running Debian Wheezy and I don't know why, but whenI switch to console F1(Ctrl+Alt+f1) I can't enter login information. It's like Debian didn't have completely starting and wait always.The F1 console looks like this:
[screen content]
Starting enhance syslogd: rsyslogd.
Starting system message bus: dbus.
[code]...
I'm new to SUSE Linux 10 and I am having a problem with a local user account. Here is the scenario,Logged in successfully to a putty session as the "user" and try to change the password :
passwd "user"
(current) UNIX password:
passwd: Authentication failure
I am unable to change the password as the user but i am able to log into the server with the same user.
I am using pam module to set password policy in my SuSE linux machine. This is my /etc/pam.d/common-password file:
Now if root user tries to change the password of a normal user, giving the same password, it is throwing an error saying "Password has been already used. Choose another".
Example:
> passwd user1
> password1 (set successfully)
> passwd user1
> password1 (Password has been already used. Choose another)
This should not happen with the root user.
At the RHEL prompt, I entered the standard user's username/password combo. Linux displays a message box stating:"Your account has expired; please contact your system administrator."Next, I entered "root" in the username field and entered the root password (which expired also--keep in mind that passwords are set to expire after x days). Linux displays a message box stating:"You are required to change your password immediately (password aged)."When prompted to "Enter current UNIX password", I entered the new password (was that the right thing to do?); Linux displays a message box stating:"The change of the authentication token failed. Please try again later or contact the system administrator."I rebooted the system and got into command line mode; somehow I logged in as "root" (don't know exactly how, but needed to change the password there). At the "#" prompt, I type "passwd root"; Linux displays the message "Changing password for user root", followed by the message "passwd: Authentication information cannot be recovered.
View 4 Replies View RelatedUbuntu Documentation > Ubuntu 9.04 > Ubuntu Server Guide > Security > User Management states that there is a default minimum password length for Ubuntu:
Say the password is to be modified by the user using passwd. Is there a command for displaying the current password policies for a user (such as the chage command displays the password expiration information for a specific user)?
This is rather than examining various places that control the policy and interpreting them since the process could contain errors. A command that reports the composed policy would be used to check the policy setting steps.
I have configured dovecot to use separate user and password file. Can I tell endmail to use it too? If not, then does postfix can this?
View 2 Replies View RelatedVmware tells me it cannot start services.I believe the issue is tied to permissions because the message indicated the log with the full details was located in /tmp/vmware-root/setup-4772.log but when I go there I receive a message telling me I do not have permission to the directory and there's a lock symbol on the directory from the File Browser utility.What do I need to do to unlock the folder and get vmware working again ?
View 2 Replies View Related