Is there a way to check which IP is using the most bandwidth at any one time? I have a proxy server running and occasionally some users download videos instead of stream them, which hogs the bandwidth on their connection and denies other users access.
View 16 RepliesI have one dedicated server in godaddy. Now I got mail regarding overage bandwidth. I don't know how to check this and I must give report how its happen.
View 1 Replies View RelatedI'm trying to check my server's bandwidth usage in real time, installed the following programs but none worked so far.
Iptraf - No results even when using iptraf -u
Tcptrack - Error : pcap_loop: cooked-mode frame doesn't have room for sll header
Iftop - No results, everything 0b
Are there any programs that displays bandwidth usage in real time and actually works on VPSes? Or getting real time bandwidth usage on a VPS is simply impossible?
My objective is when the throughput is increase my shell script is Print a message. But the Question is how to check the bandwidth.
View 1 Replies View Relatedcurrently i've face a problem of having a slow internet connection on our office, i was asked to check who among the users under the network uses the most.
is there a way how to check it?
I created a the class like this for shaping the packets with a specified bandwidth rate.....
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 15
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 750kbit ceil 750kbit
tc class add dev eth0 parent 1:1 classid 1:3 htb rate 600kbit ceil 750kbit prio 0
For Our Requirement:-
I dont want to specify the bandwidth rate strictly like this rate750kbit ceil 750kbit,based on whatever speed is coming which should allocate the bandwidth rate for particular class...I need one application for finding the upcoming bandwidth & Is any other method is there for specify the bandwidth rate in a classes.
We have a sipmle office network set up that we also use use to connect to the internet, however of late the number of users has increased thus slowing internet access. Bandwidth upgrade is not an option thus i have to do bandwidth shaping on our linux router. The question is how do set the squid configs to allow certain IP's range a certain percentage bandwidtheg 60% and furthe divide the rest. Alternatively how can allow certain IPs to have higher bandwidth access.
View 1 Replies View RelatedI'm have a project about control bandwidth base IP (ex : 192.168.1.2 have 128kbps limit download, 192.168.1.3 have 64 ....) How I can do that? Software MasterShaper is good idea? I want solve this problem base linux kernel command TC without any third party software.
View 2 Replies View Relatedi am using RHEL5 and squid as cache... i want to limit bandwidht on ip bases...
is there any software/utility which can be used for this purpose..
Is there a way to get a summary of how much bandwidth a given process used on Linux after the process completes? I do not want a monitor, I want something I can look at after the task has completed..
Ideally something like the "time" command or a profiler, but for network usage.
I am doing a school project in which I want to get the bandwidth of a network interface at any given second, or some other small increment of time. I need this for a Perl script I am working on. Therefore it needs to be non-interactive and just prints results.
View 2 Replies View RelatedOn occasion I see my bandwidth usage using the gnome system monitor going up to 300kbit/s. I just cant figure out what is causing it. I want to know what process or program in using my network like that? I do ssh into different machines and servers, where I would really like to beable to monitor bandwidth usage. It would be very useful to know which utilities people use to see what bandwidth is being used and by which applications / programs / processes / or threads. I don't even know where to start looking. The two small programs I have found are insufficient. bmon and bwm-ng. And tools like wireshark (packet sniffers) are over kill. I would like some thing in the middle, preferably text console based.
View 3 Replies View RelatedIm using squid proxy server..i want to limit bandwidth for single user using squid proxy.
View 6 Replies View Relatedfilter bandwidth for some users (about 150, from 100.100.100.1 trough 100.100.100.250) on LAN. All LAN users connect to the internet through RedHat linux server and all I could do so far is to ban some of them using iptables and commands
-A INPUT -s 100.100.100.107/32 -j DROP
-A FORWARD -s 100.100.100.107/32 -j DROP
-A INPUT -s 100.100.100.235/32 -j DROP
-A FORWARD -s 100.100.100.235/32 -j DROP
I would like to set a download/upload limit for some of them, is that possible?
I'm trying to create a script that will find the bandwidth usage of certain protocols only. For example, SMTP. I would like it to just return a number. Is there a known command/parameters to output something like this?
View 2 Replies View RelatedHow to do bandwidth throttling in Squid server? i wan to set particular bandwidth for particular ip, how to do it in Squid server?
View 1 Replies View RelatedI'm going to set up a new linux router for a company, and have to set up bandwidth throttling. They have an unlimited ADSL internet connection which will be shared between 2 businesses, one being them. I will need to set it up so their connection will never be slowed down by the other business. They will both be connected to the same NIC, but will be on different subnets. How would I go about doing this?
View 2 Replies View RelatedIs there a way in Linux to give a specific application more/less priority for network bandwidth? Something like how nice does for CPU priority.
Context: I'm currently on a very low bandwidth connection (3G dongle). While I'm performing a quite large upgrade using aptitude, it becomes virtually impossible to browse the web since the upgrade download is hogging my Internet connection.
So what I would like to do is somehow decrease the network bandwidth priority of the aptitude process (and all its children) so that it won't use too much bandwidth while another process is using it.
What I want to do is to write a script that gathers some information (like cpu temperature and bandwidth usage) and logs it into a file. I can't figure out how to get a single sample of the current used bandwidth: I've found that there's plenty of tools to get this information from command line, but the majority of them are curses based, so I can't take their output to put it into a file. Among these I've found bmon, that has a nice ascii output. The problem is that this output is updated constantly, while what I want is a single "sample" per program call.
Is there a way to get this done with bmon or someone knows another program to accomplish this task?
I am newbie for Linux I want to script for bandwidth Limite per user MAC based also how can i add user MAC and where to add? I want per user 16Kbps each user.
View 1 Replies View RelatedIn my household a number of people use the internet. Up to a maximum of 3 wired connections and 2 wireless connections at its peak, all connection through my D-LINK G604T router. The problem is, when one person is downloading or watching ..... or whatever, the others using the internet suffer. I've spent hours configuring QoS on my router, and long story short, no matter how I configure it, it just simply does not work. QoS in no way shape or form limits connection speed (which it says it should). Anyway.
I have a spare computer under my desk, and I'd like to know if I could set this up with a (free) linux distro that limits bandwidth speed per connection. For example, of the 1500 kb/ps (about) my modem pulls, is there a way to limit that to 768 or 512 per connection? so person A can still download, person B can still watch ....., and person C can still play counterstrike with a latency under 100. This would solve many, many arguments in my house I am *fairly* good with computers, but if the distro came with documentation and a GUI that would be awesome.
* TL;DR: *
Is there a linux distro I can load on a spare computer that limits bandwidth per connection, wireless or otherwise, with good documentation?
Failing that is there firmware I can use for my modem (dlink g604t) that would do the same?
Failing that do you know of any good hitmen that would solve my family arguments, ahem, permanently?
I want to monitor the bandwidth used by each user in my proxy server.
View 1 Replies View Relatedi configured Squid3 server in my Ubuntu 10.04.Now the ip based and content based blocking is working fine.Now i want to configured bandwidth allocation of ip address and group ip address..pls give the solution
View 11 Replies View RelatedIn one of our network we are using one firewall which works as gateway. All machines are able to access internet through this gateway. There is no filtering and any internet restriction. I would like to setup monitoring system which monitor and log bandwidth and sites access by client machine. Is there any tool which monitor internet access as well as sites which are access from client machines.
View 12 Replies View RelatedI am new to Debian but not Linux-based systems. I have been experimenting a lot with Debian Lenny/Squeeze. I am growing more comfortable each day with the Debian design. Yet there remain many unexplored areas. I am creating a migration check list. Things to check, prepare, or reconfigure when moving from one Linux-based system to Debian.
I have a good computer background and my current check list probably is fairly good. Yet I would appreciate input and opinions from experienced Debian users of things to watch in such a migration. Login defs, passwd/group files, different directory locations, keymaps, services and daemons, etc. I am not too concerned with the desktop as I plan to stick with KDE 3.5 for a while and I can basically move those settings across.
I want to put check menu & check list in utility dialog.i dont know how i do this
View 1 Replies View RelatedI want to write a script and put it in /etc/rc.local so that
if lan is connected then
rfkill block all
else
nmcli con up id 'Network id' --nowait
How should I write the if part and how should I check for "lan is connected" ?
I found that I have several services running related to ftp
Code:
cat /etc/services | grep ftp
ftp-data 20/tcp
[code]...
I wonder to know the command or the procedure to get the overall CPU utilisation in linux. I have used top, iostat, mpstat but the outputs are not the way i needed. Is it possible to get the output like...
CPU usage: .....% or something like that.
I'm looking for an easy way to check if some server is down, and then act upon it. This check needs to be done from the backup-server. So if the backup-server thinks the production server is down, then in some bash script I want to execute a rule.
My question: what is an easy way to check another server ?
1. I know about Nagios. It's great, but to large to use here.
2. I could ping the server, put a ping that fails does not necessarily mean the server is down.