General :: Apt-get Install Command Is Not Able To Fetch Packages From Ubuntu Repository?
May 8, 2010
I have been working on Redhat family of distributions since past 1 year. Two days back I installed Ubuntu 10.04 on my laptop. I am novice to Package Management in Debian family of Linux distributions. My Internet connection is working fine. But I am not able to install any package with apt-get package Manager. Here is my /etc/apt/sources.list file
Code:
deb http://in.archive.ubuntu.com/ubuntu/ lucid main restricted
deb-src http://in.archive.ubuntu.com/ubuntu/ lucid main restricted
deb http://in.archive.ubuntu.com/ubuntu/ lucid-updates main restricted
[code]....
View 12 Replies
ADVERTISEMENT
Jun 11, 2010
Is it possible to install all packages from an APT repository?
I know it is possible to do it manually, but then you would need to know all the package names, and I don't.
I want to install all the packages from BackTrack into my Ubuntu installation. I really don't like the idea of having it in a VM and having a separate partition for it is even more out of the question. I know that the folks at BackTrack doesn't like it when people leech their repositories, but that's what you get for releasing open source software. Stupid? maybe.. A valid reason? probably not.. Do I still want it? Yes.
Another edit: I have now given up on this as it seems impossible to get it to work even by manually installing packages.
View 5 Replies
View Related
Apr 3, 2010
Update Manager fails to update the files in Karmic 9.10. The Internet access is fine but it fails to fetch from repository (404). I haven't changed any setting but since yesterday I realized the Update Manager is not working. I tried different servers and results were the same. It seems the packages are available in the server (checked by firefox), while Ubuntu can not find them. As I am using Bell-Sympatico as ISP, I am not behind any proxy.
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu 9.10"
[Code]....
View 4 Replies
View Related
Jun 25, 2010
I have access to backup server via rsync protocol (only rsync, nothing else). Now, I want to fetch file from there (which is .tar.gz) and pass it directly to tar command, without saving the archive in local filesystem. To visualize, with ssh access I could:
ssh remote_host cat backup.file.tar.gz | tar xzf - And I will get uncompressed backup locally, without actually storing .tar.gz on local machine. Is it possible to achieve when using rsync?
View 4 Replies
View Related
Jan 2, 2010
How can i install total rpm packages in Server folder which is locket at /root/Server
View 3 Replies
View Related
Jun 30, 2010
I am looking out for a command which can give me the list of applications installed and the corresponding install paths for those.let me know if there is any such command. Also, i am using rpm command to get the list of packages installed(i am assuming that this shows the list of applications installed).
View 4 Replies
View Related
Jul 19, 2010
I want to clean my system out of old packages. I can use rpmorphan to find orphaned packages, but how do I find packages that are not longer present in their vendor repository?
View 2 Replies
View Related
May 4, 2010
I'm trying to upgrade my 9.10 desktop to 10.04, and it is failing to fetch the following two packages:
[URL]
I've made sure everything is patched current prior to the upgrade and have tried clearing out the contents of /var/cache/apt/archives/partial first as well to no avail.
View 3 Replies
View Related
Dec 25, 2010
9.04 has not been updating and is giving these messages.
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...rce/Sources.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...rce/Sources.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80] .....
Some index files failed to download, they have been ignored, or old ones used instead.
View 4 Replies
View Related
Apr 20, 2011
I have set up a local YUM repository to install own modify packages om my clients.
View 2 Replies
View Related
Mar 6, 2016
I'm a fresh user of Debian 6 64 Bit. I'm trying to install wine on it to run bluestacks. URL... but when I use the following command, it can't seem to fetch some files/packages. I have these as my sources list at the moment.
sudo nano /etc/apt/sources.list
deb http://ftp.us.debian.org/debian stable main contrib non-free
deb-src http://ftp.us.debian.org/debian stable main contrib non-free
deb http://ftp.debian.org/debian/ wheezy-updates main contrib non-free
deb-src http://ftp.debian.org/debian/ wheezy-updates main contrib non-free
[code]....
View 5 Replies
View Related
Apr 7, 2011
I recently discovered the medibuntu repository and wanted to add the repository to synaptic. I copied and pasted the code from this: [URL] web page on medibuntu.org's website.
The attachment shows exactly what the terminal spit out after running this command (and the command that was run - of course). What I am wondering about is the last six lines - which seem to indicate that, at a minumum, getting some key was not successful. I'm not sure how important this is; but, since I don't actually have anything I need to install from this repository right now, I wanted to be sure I'm squared away for when a time may come in the future.
After running the command I did the following to try and determine the status:
I went into synaptic > settings > repositories and looked under two of the tabs to see what was there:
The tab, "Other Sortware" Lists two entries at the bottom that stood out to me. They are:
Medibuntu - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) which was checked.
And:
Medibuntu (Source) - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) (Source Code) which was not checked.
The tab, "Authentication" lists a total of three entries. Their descriptions are:
Ubuntu Archive Automatic Signing Key
Ubuntu CD Image Automatic Signing Key
And:
Ubuntu Extras Archive Automatic Signing Key
None of those (under this Authentication tab) strike me as having anything to do with medibuntu (could be wrong though - just not sure).
Finally, I did a search in synaptic for a library I think should be available through medibuntu, "libdvdcss." I was presented with a list of eight items, none of them matching libdvdcss by title. The closest match by title and description that I could identify was, "libdvdread4" This I did as a sort of test to see if I might be accessing that repository.
View 9 Replies
View Related
May 6, 2010
Just installed Lucid from CD ROM. I have 2 HDDs. When the install screen came to ask about partitions, it didn't seem to want me to install it onto the same HDD as my XP/Ubuntu 9.10 partitions, so I installed it onto my other HDD. After it finished, I restarted and it appeared on GRUB. It takes me to a command line where it asks me for my desktop login and then my password.
It allows me to type in my login, but the password isn't so easy. It won't let me type it in. It's as if the keyboard stops working apart from the return key. I have no understanding of command line. As soon as I'd entered my password, it went on to tell me that there were no packages to install, and then stayed on command line as if I'd just opened a terminal. How would I get it to take me to my desktop?
View 3 Replies
View Related
Jan 2, 2010
How can i install total rpm packages in Server folder which is locket at /root/Server
View 1 Replies
View Related
Aug 6, 2010
I'm running Debian Lenny on a machine and every time I try to update apt I get the following error message:
OK http://security.debian.org lenny/updates Release.gpg
OK http://ftp.de.debian.org lenny Release.gpg
Ign http://security.debian.org lenny/updates/main Translation-de
[code]....
For some reason apt tries to download Packages instead of Packages.bz2 and Packages.gz and I neither know why nor how to fix it.
View 13 Replies
View Related
Sep 3, 2010
Couple of days I go I setup VLC using Kubuntu's graphic software manager, and installed the 3 plug-ins, one of which was related to pulse. After doing this sound stopped working in flash videos. I had read, not sure where, that Kubuntu didn't use pulse (which slipped my mind when setting up VLC).
So I make the mistake of removing everything which had pulse in it's name (again, via the graphic software manager). A message popped-up saying that some packages needed to be removed/edited (a LONG list, a big clue that I was doing something stupid I guess). I let it run it's course and after that it won't boot properly.
If I boot it normally it hangs at the Kubuntu screen with the five dots filling endlessly. If I press F1 it's stuck at "checking battery status."
Recovery mode boots, but the recovery option does nothing.
So I was wondering if I could boot into recovery mode and go into the terminal and add a live USB as a repository for apt, and try to salvage the install?
Or should I admit defeat and reinstall?
View 1 Replies
View Related
Mar 6, 2009
Currently i am using mapserver 5.0.3 , AGG 2.5-6 on fedora 9. I need some help with mapserver and AGG support. I am trying to use AGG/PNG outformat in the mapfile as well as i added precisely. When i call the link through browser i recieved the following error:
loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver AGG/PNG, but this driver isn't configured. It is clearly evident that from the error, the driver is not configured. since all the mapserver version 5 suppotrs AGG rendering backend, so i checked whether mapserver supports AGG or not.
[kapil@localhost cgi-bin]$ mapserv -v
MapServer version 5.0.3 OUTPUT=GIF OUTPUT=PNG OUTPUT=JPEG OUTPUT=WBMP OUTPUT=SVG SUPPORTS=PROJ SUPPORTS=FREETYPE SUPPORTS=WMS_SERVER SUPPORTS=WMS_CLIENT SUPPORTS=WFS_SERVER SUPPORTS=WFS_CLIENT SUPPORTS=WCS_SERVER SUPPORTS=SOS_SERVER SUPPORTS=THREADS SUPPORTS=GEOS INPUT=TIFF INPUT=POSTGIS INPUT=OGR INPUT=GDAL INPUT=MYGIS INPUT=SHAPEFILE
[kapil@localhost cgi-bin]$
I found that my mapserver doesn't support AGG means SUPPORTS = AGG is missing in the above output. But i have already installed AGG in my system. In order to clear this issue i gone through many threads in forums, but i was not satisfied with the answers. Atlast i came to know that, i have to recompile the mapserver with AGG. The following link gives you some idea about compiling mapserver with AGG in linux [URL] But the problem now i am facing is i have installed both the mapserver and AGG through YUM INSTALL command so i dont know how to recompile mapserver with AGG support. I think, there will be no configuration file normally when installing through Yum insatll command.
View 2 Replies
View Related
Mar 8, 2011
What command should I use to remove orphaned packages or units?
View 3 Replies
View Related
Feb 26, 2011
using 10.04 . I am trying to create my own repository for packages.So that updates can be done offline. 1.I copied all packages which i usually use from
Code:
/var/cache/apt/archives
and put it in folder local_repository
2.took backup for of sources.list
[Code]....
So how to create Packages.gz and how to create repository?
View 5 Replies
View Related
May 1, 2010
I am using Ubuntu 9.04.Is there any command to know about the packages I've isntalled so far?
View 2 Replies
View Related
May 24, 2010
Does anyone has the information regarding a collective repository for ubuntu download packages which provides a single download for all the packages or selective packages, may be some torrent sort of links.I know of packages.ubuntu.com but there the packages are dispersed. Downloading each one of them requires a hell lot of time. Doesn't anyone has this information where a one click download of packages is facilitated.
View 6 Replies
View Related
Aug 4, 2010
I successfully updated my Ubuntu 8.04 lts server Hardy many times, but today when I:
Code:
sudo apt-get update
I got errors like:
Code:
Err http://ro.archive.ubuntu.com hardy/main Packages
404 Not Found
View 1 Replies
View Related
Nov 30, 2010
I'm using Ubuntu 10.10 (i guess 64 bits), not the Maverick version but the new 10.10. My laptop is Acer Aspire 5715Z.
Now I was on this website and tried to add the repository to get the Medibuntu packages with the following code:
Code:
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update
[Code].....
View 9 Replies
View Related
Jun 5, 2011
I would like to find out if any of the packages installed on my system are from the restricted repository. I would like to get rid of all of them if possible. Does anyone know how I could find out? I am running Ubuntu 11.04
View 1 Replies
View Related
Jul 8, 2011
Is there any difference between the packages in the repository, for ubuntu-XXX-server vs. ubuntu-XXX-desktop vs. kubuntu-XXX-desktop? Or are the different systems based just on what the default install from the ISOs is?
View 6 Replies
View Related
Jan 21, 2011
What the hey??? I was looking to install Virtualbox via Synaptic the other day and I found a package with "~Ubuntu~lucid" next to the latest version. I have all confidence in the Mint team and I'm sure they scrutinized these packages for compatibility, but a little disclaimer would have been nice. I do not want any Ubuntu packages on my system. The least they could do was package the source code into a pure .deb.
View 5 Replies
View Related
Feb 11, 2011
I know dpgk --get-selections will list all installed packages, but is there a way to also get the repository each belongs to as well.
View 3 Replies
View Related
Mar 18, 2011
I completed an installation of Ubuntu 10.10 LTS 64-bit as a guest operating system on a VMWare server. Somehow during the installation process, I neglected to install a GUI desktop. I want to install the gnome desktop, but I am running into a series of errors similar to the one shown below:
[Code]....
View 1 Replies
View Related
Nov 8, 2009
I'm a new user of fedora 11 n an off line user too. I want to install the packages from a dvd which contains all the repositories and suitable key files for it. I dono how to configure that.
View 4 Replies
View Related
Feb 13, 2011
Lately when I've tried to update my packages many of them don't update. I get nothing out of the ordinary when using the terminal but when I try to update via the Update manger I get this error message:
Code:
Error message:
Fetch failed: W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_source_Sources Hash Sum mismatch
W:Failed to fetch bzip2:/var/lib/apt/lists/partial/mirror.steadfast.net_debian_dists_testing_main_binary-amd64_Packages Hash Sum mismatch, W:Failed to fetch http://mirror.steadfast.net/debian/dists/testing/updates/main/source/Sources 404 Not Found [IP: 208.100.4.53 80]
[Code]...
I've tried several different mirrors but get the same error with every one. Same result with ftp as well. Yesterday I upgraded to Wheezy and every package successfully upgraded, but today the problem started again.
View 10 Replies
View Related
