General :: VFS:Cannot Open Root Device "hdxy" Or Unknow-block(0,0)
Nov 29, 2010
I got a HP LH 3000.Current OS release is RH9 2.4.20,and I wanna update it to RH9 2.6.5 While updating,I met the problem followed:
VFS:Cannot open root device "hdxy" or unknow-block(0,0)
Followed are packages I used:
device-mapper-1.00.19-2.i386.rpm
linux-2.6.5.tar.bz2
mkinitrd-4.1.18-2.i386.rpm
lvm2-2.00.25-1.01.i386.rpm
module-init-tools-3.2.tar.bz2
First I installed the mkinitrd-4.1.18-2.i386.rpm, then compiled the kernel and installed it.
View 5 Replies
ADVERTISEMENT
Apr 16, 2011
I got a problem with my kernel. The initramfs source is busybox, python and gcc from ubuntu. The busybox have i compiled it self. Python and gcc is from /usr/bin. I gonna install my kernel on a i586 machine. Old yes. On the xTerm (termial) it stand "root device 8,1).
Quote:
VFS: Cannot open root device "sda1" or unknow-block(0,0) append a correct "root=" boot option; here are the available partions: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)Pid: 1, comm: swapper Not tainted 2.6.38.3 #1
Call trace: This is my syslinux.cfg
default menu.c32
prompt 0
menu title BOOTLOADER
[code]....
View 2 Replies
View Related
Nov 5, 2010
Installed Maverick last night... the system has been working fine all day... then on a reboot tonight got the following.
RAMDISK: gzip image found at block 0
usb 1-2: new high speed usb device using ehci_hcd and address 2
uncompression error
VFS: Cannot open root device "mapper/mylaptop-root" or unknown-block(0,0)
[code]....
Then it gives the Kernel Panic
Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper not tainted 2.6.35-22-generic #35-Ubuntu
Then a call trace...This is a brand new install of Maverick I copied my files onto a USB and did a fresh install on the whole drive using the alternate CD (the desktop and netbook editions both failed to read on my system) was previously using Karmic with no issues. I tried to e2fsck the dev/sda1 from the CD in "repair broken system" mode but the return was "clean" I read that as the file system being intact but this is an area that I have no real knowledge in.
View 1 Replies
View Related
Jun 21, 2009
VFS: Cannot open root device "<NULL>" or unkown-block(202,17)
append a correct "root=" boot option
Kernel panic not syncing
VFS: unable to mount root FS on unkown-block(202,17)
I have a Dell xps with a dual core, 8 gigs ram, a primary hard drive with vista on it, and a secondary with linux in its future. It starts loading vmlinuz but ends up with the kernel panic before anything else. I am able to install earlier cores (5-8) and vista recognizes the ram just fine.
View 1 Replies
View Related
Nov 14, 2009
Currently running rc2. Downloaded 11.2 final DVD, md5sum is good, burned DVD, YaST says media check is good. (And for completeness burned a second DVD and get the same problem.)
On booting from the DVD I select "Installation" - a kernel loads and starts checking available h/w devices then crashes with the above message.
Followed by Please append a correct "root=" boot option.
Tried with root=sda1 (partition that is /) and only change is unknown-block (0,0)
My best guess is that I have EXT4 (did a clean install of RC2)? And/or I dont have a swap partition?
View 1 Replies
View Related
Apr 24, 2011
I am trying to install Ubuntu 10.10 from a USB flash memory stick. It works fine until around 95%, where I get the following warning/error:
[Code]....
I click OK and the installer seems to finish nicely, except the terminal throws several errors along these lines (see photo):
[Code]....
I tried also with 10.04 LTS, the difference being that the install warning appears two or three times instead of once. Some results from googling (Ubuntu Forums, Ubiquity bug) suggest unchecking the initial update options. I am going to try this but I'm not sure if I'll be able to get the boot loader right (there seemed to be problems with this).
View 7 Replies
View Related
Jul 21, 2010
I'm having trouble mounting hard drives and partitions - and am rather nervous about using Yast partitioner to do this. Is there something that would tell me about mount points in Yast partitioner? So far I haven't been able to find that information anywhere. I don't want to lose information on existing drives and partitions but do want to be able to access them.Some of them appear under disk information in "My Computer" but if I try to mount them I get this error message.There is no application installed that can open files of the type block device (inode/blockdevice).I was trying to edit fstab,his didn't seem straightforward either. I've been hacking this about in other Linux distros - so not entirely clueless
View 6 Replies
View Related
Oct 25, 2010
I have a redhat ES3 I want virtualized.the virtual machine encounters a problem starting when it is virtualized
There are this message :
RAMDISK : couldn't find valid RAM Disk image Starting at 0.
VFS: Cannot open root device "LABEL=/" or 00:00
please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 00:00
View 2 Replies
View Related
Mar 22, 2011
I have added CentOS5.5 x86-64 to a linux box that already contains installations of Ubuntu 9 and SL 5.2. Grub2 was installed with Ubuntu and is on the MBR of the disk. I did not install grub with anaconda/Cent. Grub update in ubuntu finds the Cent install and addes it to the grub.conf, and Cent appears in the grub menu at boot. If I select Cent, I get the following error.
VFS: Cannot open root device "sda7" or unknown-block(0,0)
Please append a correct "root=" boot option
Below is the output of boot_info_script, which gives the relevant boot file data. There are still grub conf files on the SL install, but grub is not installed there anymore.
Boot Info Script 0.55 dated February 15th, 2010
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for /boot/grub .....
sda3/boot/grub/grub.conf:
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that all kernel and initrd paths are relative to /, eg.
# root (hd1,2)
# kernel /boot/vmlinuz-version ro root=/dev/sdb3
# initrd /boot/initrd-version.img
View 1 Replies
View Related
Jul 16, 2010
I have been working with a project pc. I have a new HD loaded with Linspire. After loading the o/s I replaced the motherboard and cpu. I now have a Biostar A780L (Didn't see it listed on the HCL) and an AMD Athalon II Multi-Core Processor. Now when the pc boots I get an error:VFS: Cannot open root device "343" or 03:43 append a correct "root" boot option Kernel panic: VFS: Unable to mount the root fs on 03:43 I tried reloading the o/s but the disk won't read from the DVD ROM. Checked my BIOS and it appears to me that it should read from the DVD ROM first but it goes to the HD and tries to load the o/s there.
View 6 Replies
View Related
Apr 23, 2010
When booting up my IBM Thinkpad Ubuntu stalls giving the following messages:
Cannot open root device "uuid=58a5831c-5757-49f8.....
Kernal Panic - not syncing: Unable to mount root fs on unknown-block
Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
I am or was using Hardy.
It seems to me that the program is telling me it can't find the hard drive or the partition where the OS resides. I have my drive partitioned with into sections for booting, the OS and my Home directory.
View 7 Replies
View Related
Oct 21, 2010
I have been trialling Slack 13.1 on a spare 32b system for a couple of weeks, and today I took the plunge and put it on my main machine. I completely re-partitioned the drive (using the Slack disk) and installed Windows7 on one partition and Slack 13.1 on another. The install worked fine and I tested that it boots from LILO into both Windows and Slack perfectly. I then ran:
slackpkg update
slackpkg install-new
slackpkg upgrade-all
And since then it fails to boot with the following:
Code:
VFS: Cannot open root device "802" or unknown block(8,2)
Please append a correct "root=" boot option; here are the available partitions:
0840 488386584 sde driver: sd
0841 97659103 sde1
0842 19535040 sde2
0843 498015 sde3
[Code]....
I have seen many, many similar problems when searching Google but they all seem to be caused by different things.
View 8 Replies
View Related
Jun 7, 2010
I am using a kernel with no initrd. I have had this kind of panic before. Usually it means that the kernel can access the hard drive because the driver for the controller or filesystem isn't built into the kernel.
The kernel is 2.6.34 vanilla.
My IDE controller is a Silicon Integrated Systems SiS 5513, and I built the driver for it into the kernel BLK_DEV_SIS5513=y
My /boot (hda1) is ext2, and everything else is ext3
EXT2_FS=y
EXT3_FS=y
My grub entry (hda2 is my root partition) kernel (hd0,0)/vmlinuz root=/dev/hda2
View 5 Replies
View Related
Jun 1, 2010
I want to test LVM+Raid. When I was testing ZFS on Solaris, I was able to create regular files, and use those as disks for testing.I tried creating a regular file full of zeros w/ dd, then partitioning that. fdisk seemed to be able to create a partition on the regular file, but mkfs and parted couldn't work with it. Is there any way to create fake block devices for testing?
View 4 Replies
View Related
Jun 14, 2010
When I try to mount the /dev/sdd1 device then it give errormount -t ext3 /dev/sdd1 /4hdmount:/dev/sdd1 is not a valid block device
View 9 Replies
View Related
Jan 22, 2010
An old machine in our office, running Ubuntu 6.06 all of a sudden will not boot up. I get the following info during boot:
Uncompressing Linux... Ok Booting the kernel
mount: Mounting /root/sda1 /root failed: No such device
mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory
[code]....
I haven't changed anything on the system as far as I'm aware, and I ran some HD diagnostics and everything seems fine. however when I try to mount the drive with the following command:
sudo mount -t ext3 -o rw /dev/hda1 /mnt
I get the following error:
mount: wrong fs type, bad option, bad
superblock on /dev/sda1, missing code
page or helper program, or other error
In some cases useful info is found in
syslog - try dmesg | tail or so
I ran fdisk -l and it says the partition type is Linux. The output after running dmesg | tail :
[12207.483801] init_special_inode: bogus i_mode (101)
[12207.483809] EXT2-fs: corrupt root inode, run e2fsck
[12260.427078] init_special_inode: bogus i_mode (101)
[code]...
Update: After running e2fsck -p /dev/sda1, I get the following info:
/dev/sda1: clean, 142449 / 9584640 files, 5402711 / 19161520 blocks
View 1 Replies
View Related
Aug 13, 2010
I installed Ubuntu 9.10 on an old PC, Dell dimension L550r, PIII500, 512M ram. There is a problem that monitor is not detected. I could logon as 'xterm' type, but the window size is only 1/4 of screen. When I logon as 'GNOME', it seems screen is not refreshed. media player window is blank, but can see a static image if minimize and restore window. Even terminal window is blank.
Go to "System"->"Preference"->"Display", shows "monitor unknown" I can not find file /etc/X11/xorg.conf, is this normal?
xrandr command output:
Screen 0: minimum 640x400, current 1024x768, maximum 1024x768
default connected 1024x768+0+0 0mm x0mm
1024x768 60.0* 75.0 70
832x624 75.0
View 1 Replies
View Related
Nov 2, 2009
* I am implementing mass storage device on a test board.
* It contains NAND flash.
* Using corresponding "udc driver" and "g_file_storage" I could make my test board enumerate as mass storage device on my Linux machine.
* my 16 MB pen drive (test board) is now ready for read/write.
But there are some Bad Blocks on the NAND.Hence copy is not complete. Although on Linux machine there is no error message. Now , what is there in a normal pen drive which manages the Bad Block or what am I missing so that such Bad Blocks are managed.
Here is the error I get on my test board :
mtdblock: erase of region [0x2c0000, 0x4000] on "Bon 2" failed
end_request: I/O error, dev mtdblock2, sector 5664
Buffer I/O error on device mtdblock2, logical block 708
[code]....
View 3 Replies
View Related
Mar 17, 2011
it possible to block root access to a particular directory.
View 7 Replies
View Related
May 11, 2011
I have one hard disk (call her HDA) that contains nothing but a single ext4 partition containing a backup of all my important data. Last night I did a clean install of Ubuntu 10.10 on my primary hard disk (call her HDB) and from there proceeded to upgrade directly to Ubuntu 11.04 upgrade. In 10.10, I was able to read HDA just fine. However after the upgrade, I can no longer mount this drive. When mounting from file browser:
Code:
Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda,missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so The end of dmesg said the following:
Code:
dmesg | tail
[ 82.130904] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
my hard disk has a block count greater than the size of my device. I've done my background searching on this and tried a command line utility I've never heard of before:
Code:
# sudo e2fsck /dev/sda
e2fsck 1.41.14 (22-Dec-2010)
The filesystem size (according to the superblock) is 122096646 blocks
The physical size of the device is 122096381 blocks
[code]....
this is as far as I've gotten. This drive holds over a decade's worth of work for me and is extremely valuable. I really didn't think that the Ubuntu upgrade process would mess with this drive, seeing as the Ubuntu install was contained on an entirely different drive. What is it that I need to do to restore my drive to working status?
View 9 Replies
View Related
Mar 10, 2011
I had found the following error messages one of my Linux server. the file system using for this partition is EFI GPT. Is this cause because of RAID controller incompatibility or Driver mismatch? PHP Code:
[Code]..
View 2 Replies
View Related
Jan 13, 2010
When I boot up for Ubuntu 9.10, I get a screen that gives me a selection of what I assume are versions of Ubuntu 9.10.I get: Kernal Panic: not syncing: VFS: Unable to mount root fs on unknown-block(8,3) and the process stops. I have to turn off the computer and go back and select "2.6.31-15 generic"What is going on and what do I need to do to get back to 17 generic version?
View 5 Replies
View Related
Jan 30, 2011
I have a wind river linux installed on a IDE disk, whenever i boot it, it says:
The menu.lst file looks like this:
I want to install new kernel of wind river linux, i tried to mount usb disk but it is not working.
View 14 Replies
View Related
Mar 17, 2011
I just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
View 10 Replies
View Related
Sep 26, 2010
Ubuntu 10.04.1 to prepare a USB flash drive for use as installation media for a new computer that's on the way. When the Linux kernel tries booting up on the flash drive, I get an error saying VFS: Cannot open root device "<NULL>" or unknown-block(8,1).Here's how I got to this point...Created bootable partition on the thumb drive.Put the following files onto the flash drive: initrd.gz, vmlinuz, and ubuntu-10.04.1-server-amd64.iso fromhttp://archive.ubuntu.com/ubuntu/dis...ages/hd-media/Install Grub2 to the drive via grub-install.Put the following into boot/grub/grub.cfg:
Code:
set timeout=120
set default=0
[code]....
View 9 Replies
View Related
Feb 28, 2010
The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive.When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message.
[19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21
[19712.145347] usb 2-2: configuration #1 chosen from 1 choice
[19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices
[code]....
I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external hard disk.
View 4 Replies
View Related
Feb 10, 2010
i am just learning about computers and know nothing at all except how to turn it on. i just booted up linux and recieved message: [0800654] Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown - block (8,1)
View 5 Replies
View Related
May 17, 2010
I have attempted to install kernel 2.6.34 and 2.6.33 kernels with this Debian howto [url] Everything worked without any errors until I went to boot into the new kernel. When I receive this kernel panic output Kernel panic - not syncing VFS: unable to mount root fs on unknown-block(0,0)
It also spits out something about being unable to access ext2 FS. I googled this symptom and have seen that it is fairly common, but everyone's error seems somewhat unrelated. I used the same kernel configuration as the one that is currently working, to keep things simple.
And here is what my menu.list looks like:
View 3 Replies
View Related
Jan 15, 2010
I have a Linux (Kubuntu) system with a large (~20Gb) file which I would like to mess with. Specifically, I want to copy the entire contents of another large file (~12Gb) to the middle of this file, and keep the bits of the file which are not overwritten.This is what I want to happen, with the text between the pipes representing file contents:Before:
outfile: |abcdefghijklmnopqrstuvwxyz|
infile: |123456789|
After:
[code]....
View 1 Replies
View Related
May 28, 2011
I want to be able to change the root device, say from sda to sdb, so that I am able to remove sda. I don't believe this is possible with chroot, as I am changing the root folder to a mount point that exists on sda (sdb is not on fstab), so removing it would lock up the system.
Any thoughts how I can do this?
View 2 Replies
View Related
