I am trying to stream an MP3 using ffserver. My config for ffserver is
Port 8090
MaxHTTPConnections 2000
MaxClients 1000
MaxBandwidth 4096
CustomLog -
NoDaemon
[Code]...
but it goes right to the prompt screen after this. It does not appear to do anything and when I try to play the stream nothing happens. Is there something I'm missing?
I am using ffserver to stream from a capture directly to a browser, FireFox and Chrome. I have been trying to get the stream to played with html5 but it doesn't seam to work. Html5 does work with ......com but only in Chrome. Here is my ffserver setup:
Code:
Port 8080
BindAddress 0.0.0.0
MaxClients 1000
MaxBandwidth 10000
[Code]...
how to install FFServer (RTMPDump is already installed)? So i mean - what do i need to Download on centOS? I wanna Re-Broadcast some of my Streams with RTMPDump + FFServer
View 1 Replies View RelatedI am testing several programs for video editing and video format change.I have been trying avidemux, and now I am trying to use ffmpeg, and a graphical frontend for it, Winff.As an example I am trying to convert an MP4 file to AVI. I obtain an error that says: "Unknown encoder 'libxvid'". How could I possibly now what I have to install to be able to convert the files without errors?
PD: This is the output from ffmpeg when called from Winff:
FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al.configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-
[code]....
I successfully installed darwin streaming server .. I stream Audio through internet well but videos I can stream locally in my network only .. when I am connected to internet outside my network .. it doesn't stream I think their must be ports opened for that .. or any 1 have any ideas .. the audio is streamed on port 8000 .. video is streamed on port 7070 but locally only .. I opened those 2 ports in my router only the audio is working .. also I opened ports 554,7170 disabled the firewall of the router .. is it a problem of ports or something else .
View 2 Replies View RelatedI'm trying to get VLC to work streaming RTP audio/video over my office network. The goal is multicast a/v streaming. In all test cases, we are streaming from VLC to VLC. I am able to stream from Windows to Windows, and from Fedora to Windows, but not from Windows to Fedora. Additionally, I am unable to receive a LOCAL stream from one instance of VLC to another, within Fedora.
I don't see any reason why this would be. The buffer indicator (where the elapsed/total time is normally displayed) never shows any connectivity, so it would appear to be a network problem, but since I am able to stream from Fedora to Windows (same IP, same port) I thought it would be something else.Does anyone know of a solution to this issue?
EDIT: Correction to previous edit: the IGMPv3 protocol was just not being picked up by Wireshark. Reverting to IGMPv2, I am able to pick up the Membership Report, Join, and Leave group packets from the Linux machine. I'm using the GUI to configure the following:
CLIENT
rtp://@239.255.12.42 :rtp-caching=1000
SERVER:
screen:// :screen-fps=30.000000 :screen-caching=300 :sout=#transcode
{vcodec=mp4v,vb=800,fps=30,acodec=mp4a,ab=128,channels=2,samplerate=44100}
:rtp{dst=239.255.12.42,port=5004,mux=ts}
:no-sout-rtp-sap :no-sout-standard-sap :sout-keep
MOST of this is default settings, for the given methods, which I haven't really changed. I've also tried adding the :5004 to the client URL to explicitly give the port, but received no different effect.
I'm trying to stream the output of my desktop's tv card to my laptop using vlc without success. I have on both pcs ArchLinux installed.I'm stuck here:
[Code]...
I am trying to get streaming video to work on install of fully up to date Ubuntu 9.10.
For example: [URL]
I am guessing that the packages/codecs necessary cannot be distributed with Linux due to license issues.
I have been using WebcamXP, but changed over to Ububtu. Is there a similar program that works like that?
View 2 Replies View RelatedCan any one tell me, how to setup a streaming video server in linux. user cant download the content can only view.
View 4 Replies View RelatedI have Debian Lenny on an i386 machine.Working fine, in general.Windows Manager is ratpoison, browser is Opera.I want to watch a video stream (russian) archived on URL...I'm doing it in Opera. I get an error message telling me that the site is inaccessible. But it works on other machines (using M$).
View 3 Replies View RelatedIs that requires a video streaming in case of only capture images and store it, without transmit it over the internet?
View 7 Replies View RelatedI am using ubuntu 8.04 with GNOME. I copied a video from cache folder of firefox.It is actually video from ...... I was wondering can I stream it to firefox to watch it once again instead of running it in media player ? If I try to drag that file into firefox it brings up window
Code:
You have chosen to open abc.flv which is a:flash video from:/data What should firefox do with this file open with movie player(default) save file
It is possible (I'm sure it is but I don't know how), to stream video program played on one Linux computer equipped with DVD so it can be watched on another Linux machine? I have pretty fast Internet connection. I watch UNIX Academy training DVDs on a laptop, however I would rather stream it and watch on my netbook which is much lighter and more portable. Where should I start looking for a solution?
View 11 Replies View Related[1st off...I used to host my music (A&R) website on a dedicated windows server...'cause I thought it was necessary for streaming .wma files. when I discovered it wasn't...I went w/ a standard hosting package, w/ GoDaddy...
BUT...
I moved my recording studio's site to it's own domain. [it used to be a series of pages on my A&R site.]
I now need to create a '301 Redirect' in my old site's directory to redirect surfers (who have my old url) to the new site...but more importantly...to retain my ranking w/ the major search engines...!
It cannot be done on a Windows server (which I'm on, w/ GoDaddy)...not an .htm redirect anyway, which I need. I've tried all the php, asp, etc. scripts...they don't work. [&...I don't think I really need windows features like php or asp...I code my site(s) in Dreamweaver as html pages.]
so...If I migrate my site(s) to a Linux server...
1) Will standard .wma streaming continue to work...? (i.e., a .wax file in the directory that points to the .wma).
2) Which type of server is FASTER for this task...(if any)...Linux or Windows...?
I am so fed up with my Sony HDR that is already obsolete. As I am a linux geek, I have been thinking on building my own media central. Reading various hardware support list gives some information about if a card works or not, but not if its good. Also, I would like to buy a card from a vendor that actively supports linux. Can someone recommend a really good DVB-T card?
I would need: DVB-T support.Radio as an option.Two or more channels, three seems like the maximum that I would ever need, but who knows. Doesn't matter if its one or two cards, as long as it works. CAM support. Additional card or built in. I have no idea of how this works actually, but I think the CA module must support mpeg4 too? HDTV/Mpeg4 support (Software is fine, I guess.) I would also need a good remote control (bluetooth) that not neccesarily needs to come with the card, and a decent fanless graphics card that handles hdtv on linux...
I was wondering if anyone knew of any [client] software that takes an audio stream from an input - the mic - samples it, optionally codes it with a codec, and then packetize it to send over the network to an IP address and port number.And on the same machine and other machines can be [server] software listening on a port that would take any packets arriving on that port from another IP address, depacketize it, optionally decode it, and output it - to the speaker.
I'm trying to allow voice over a MANET / Mesh network in a cave, with no outside connection, so can't rely on logging in to other nets or server based VoIP.
Is there a way to instruct mencoder to stop streaming/recording after a specified period associated with a loss of signal?I use mencoder to record over-the-air television recordings. Most of the time there are no problems.Occasionally a station's transmission signal disappears, caused by quirky atmospheric conditions, usually at night.Noticing these signal outages is easy by the mencoder error message:dvb_streaming_read, attempt N. %x failed with errno %y when reading %z bytes"Lengthy outages are unbearable because mencoder silently waits forever rather than quit.
The significant problem with lengthy signal outages is mencoder continues recording for the time specified by the -endpos parameter. Thus, for example, if the recording is scheduled for 2 hours and there is a 20 minute loss of signal, the recording does not end until 2 hours and 20 minutes after starting.Generally, when the interruption is lengthy the recording is ruined and I don't care to watch. I would like to programmatically tell mencoder to stop waiting and quit.Is there a way to do this? Say, after ten minutes of no signal, just terminate do not notice any parameters that might offer that option, but I could be overlooking something obvious. I tried the -skiplimit parameter with no success.
I'm trying to capture a video from a site in Japan. Unfortunately, most of the video downloader tools don't seem to work. Since I'm using Firefox I'm guessing I can't look in my local cache. Is there any way to find it?They might block you if you're not in Japan. I used to use a proxy server when I was in the US but after a while it didn't work.
View 5 Replies View RelatedI need command line for quicktime to run different tests for my streaming server. Is there any quicktime version available for linux? I am using fedora11- 64 bit.
View 3 Replies View Relatedrunning ubuntu 8.04 dual boot with windows- need windows for avery label program, ibm via voice and access data base .chose 8.04 because of long term support. firefox is now unstable and does not do streaming video ' audio.[ustream in particular and others] usually i get the video but not the audio. sometimes the fox just closes and i can open it on the second try- sometimes not. skype does work. there may be a fix for the audio using libflash support program. where to get this& what to do with it is a problem.
perhaps it would be prudent to upgrade to 10.04 but this seems to be a work in progress and might lead me into further problems. on the other hand i could work up to ubuntu 9.10 if it would be more likely to work better the get to 10.04 when it is further along. i am pretty useless with the command line.on the whole ubuntu has worked well until this problem came up.
I have a question regarding the possibility of streaming video using an Apache web server configured as a reverse proxy. Suppose I have a local web server and areverse proxy that is abroad. I want users that are nearer the reverse proxy to be served by it and not my local web server. I know in general how to configure this and there is a lot of documentation. But can it be configured to support video file streaming without saving all the media content in the reverse proxy disk?
View 6 Replies View Relatedon almost every website i've tried with streaming media the media will not play. i don't know if this is something to do with the proxy server i have to use or a lack of plug-ins on firefox or something else entirely. (they're not blocked i can get them on a windows pc on the same network) [url] this one i can play from the command line with mpalyer but in a browser i get 'waiting for video' and the status bar says 'done' [url] this one i have control of the player buttons but it just says 'buffering' and the status bar says 'done'
[url]
on these two i have control of the player but the status bar says 'transfering data' then 'done and nothing plays [url] this one plays! why's it different? videos plays. bbc iplayer crashes firefox. $ uname -a linux seven 2.6.31-20-generic #58-ubuntu smp fri mar 12 05:23:09 utc 2010 i686 gnu/linux $ firefox -v mozilla firefox 3.5.9, copyright (c) 1998 - 2010 mozilla.org
firefox plug-ins
divx web player
helixdna: realplayer g2 plug-in compatible
quicktime plug-in 7.2.0
[code]....
i have firefox set with an 'automatic proxy configuration url' i've tried manual as well.
I have been trying to view streaming video ([URL]) on my LCD TV (Sony KDL-40V5100). The video is dropping frames when I view in full screen mode. I am currently running with Ubuntu 9.10 and have installed both the Adobe plug-ins.
View 3 Replies View RelatedI recently moved (~65mi). I have all my files on my Linux Server at home. I want to find a way to have 2 Ubuntu Workstations (at my office/apartment) and Laptop to all be able to stream my media from my home server. (The server get about 600kbps upstream).
Accessing the files I found OpenVPN and NFS to work great - however streaming my videos hasn't been so good - its extremely choppy and unwatchable. I realize there is no perfect solution, but is there anything that could be setup to buffer/prefetch/compress videos making them tolerable to watch?
i have opensuse 11.3 (64-bit) installed. kde version. my sound card is a creative labs sound blaster x-fi xtreme audio, pcie interface. i am able to listen to cd music without any problems but i am unable to get streaming audio when i visit any internet radio site, videos, yahoo!tv, etc. etc. for instance, when i visit videos, the video part is ok but i cannot hear anything through the speakers. something similar happens when for instance i go to [url] and select any of the music channels. a new window pops up but the music never even starts to stream.
i know for a fact that both sound card and speakers work fine because i've tested them with windows xp. so there must be some setting in opensuse that i've missed. the weird part is that i can listen to music cds without any problems...
I've tried every how-to I can find! If it simply not possible to stream audio with pulseaudio?Flumotion says all audio devices are busy, no matter what i do!My perfered method would be icecast with pulse, but I can't get it to work! Icecast is no problem but the streams are always blank! The only suitable method I can find is using gst:
Any suggestion? Even better would be a audio streaming distro as I have a dedicated pc, but I'm having no luck with that also.
:is it possible to add streaming url's to streamtuner2 ?if possible, how?
View 1 Replies View RelatedHas anyone ever streamed video and audio using VLC before? Try as I might, nothing seems to work (get garbled video or lots of buffer underrun messages from VLC server). The videolan website claims that all the documentation on streaming is outdated too, so there's no help there.
View 1 Replies View RelatedI am trying to configure VLC to work with my Logitech Webcam. When I startup the program with the following command line
vlc v4l2:///dev/video1 alsa://plughw:Q9000,046d:0990 -vvv input_stream --sout='#duplicate{dst=display, dst="transcode{venc=x264{keyint=60,idrint=2},vcodec=h264,vb=300,acodec=mp4a,ab=32,channels=2,sampler ate=44100}:rtp{dst=127.0.0.1,port=1234,sdp=file:///home/mulder/vlc.sdp}"}'
The cam opens up and displays the video, however I cannot configure the microphone on the card. I can open up System>Preferences>Sound and the QuickCam microphone is listed, and I can configure input volume. However when I try and configure a capture device for streaming, it sees the QuickCam, but I cannot input a sound device. in /dev there is no sound devices listed, no asp, no dsp, nothing.
arecord -l returns:
card 0: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Q9000 [QuickCam Pro 9000], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
Now when I use Cheese Webcam Booth to record a video with the webcam, it does capture the audio, so I know the microphone is working. In Audacity, I can select the Quickcam as the input device, and can record audio. My guess is that I need to know what to specify on the command line to get the mic on the webcam working.