General :: Start Tomcat Using Command Prompt?
May 9, 2011Friends currently we are accessing tomcat manager using web page ]
http://localhost:8080 ,
is it possible to start the tomcat manager using command prompt!
ADVERTISEMENT
OpenSUSE Install :: Get To The Command Prompt During Start Up Of KDE?
Feb 21, 2009how to get to the command prompt during start up of KDE. Which button(s) do I have to press?
View 9 Replies View RelatedSlackware :: New 13.1 Install The System Boot To A Command Prompt And Then Run /etc/rc.d/rc.4 To Start X?
Jul 9, 20102nd and 3rd might be linux kernel problems but may help someone else so I included here.1st -- run level 4, /etc/rc.d/rc.4 and xdm -nodaemonJust installed 13.1 on an odd system, including building a new kernel.One thing I do is have the system boot to a command prompt and then run /etc/rc.d/rc.4 to start XBut I found that the rc.4 uses xdm -nodaemon flag and it was causing problems so I removed and all is pretty good. I still see some odd behavior with the virtual ttys sometimes.2nd -- when building a new kernel, I found I need the device-mapper butcouldn't tell if that was a linux kernel issue or something to do with lilo, I didn't want and don't need multiple disk devices like for LVM or MD so I didn't plan to have this enabled.3rd -- CONFIG_EXT4_USE_FOR_EXT23 When that kernel config option was selected and I have only an EXT4 filesystem, the filesystem was mounted as an EXT2, even though the kernel had no EXT2 feature. /etc/fstab specified EXT4 but the mount command showed EXT2. A silent problem that could leave an unpleasant surprise since EXT2 hos no journaling.4th -- I had to run lilo -C by hand in a virtual tty before finishing the install. This was what I had to do when installing 13.0 on different hardware. It seems that the lilo part of the install needs some sorting out.
View 9 Replies View RelatedInstallation :: Ubuntu Boots To Terminal Type Prompt / Command To Start Gnome From That?
May 26, 2010Since upgrading ubuntu boots to a prompt rather than logging into gnome. has anyone run into this? what can I do to fix this?
I recently upgraded from Ubuntu 9.10 to Ubuntu 10.4.
does anyone know the command to start gnome from the prompt?
General :: Start The Tomcat Server Remotely?
Aug 5, 2010I am trying to start remote tomcat server, it's not working as expected. I like to mansion that..I am able to stop tomcat server remotly. Below command i am using
ssh -t remoteserver sudo sh /opt/tomcat/6.0.29/apache-tomcat/bin/catalina.sh start
ssh -t remoteserver sudo sh /opt/tomcat/6.0.29/apache-tomcat/bin/startup.sh
Both are not working..when i run this script locally it's working file
same way when i run tomcat stop command it's working fine.
ssh -t remoteserver sudo sh /opt/tomcat/6.0.29/apache-tomcat/bin/catalina.sh stop
ssh -t remoteserver sudo sh /opt/tomcat/6.0.29/apache-tomcat/bin/shutdown.sh
I check log file also..when i am executing tomcat start there is no log entry in log file
Using CATALINA_BASE: /opt/tomcat/6.0.29/apache-tomcat-6.0.29
Using CATALINA_HOME: /opt/tomcat/6.0.29/apache-tomcat-6.0.29
[code]....
General :: Command Shortcut To ./startup.sh Tomcat?
Sep 19, 2011Every time I need to start or stop Tomcat, I am navigating to:
/Tomcat_Dir/bin
and once I am in the folder I enter:
./Startup.sh
And to stop the server, I navigate to the same directory and enter:
./Shutdown.sh
I was wondering if there was a way in Linux to alias the above described process, so that from any location in the filesystem, I can simply type in something like
StartTomcat or StopTomcat to perform the Startup and Shutdown of the web-server?
General :: Tomcat - Why Does 'ls' Command Return Some Results In [squarebrackets].jar
Nov 25, 2010Below is an example output of what I see when I run the 'ls' command on some directories in linux (this is from a tomcat/common/lib directory). However I'm not clear on why some of the filenames are appearing inside [square brackets]
-rw-r--r-- 1 root root 1038825 Aug 30 2006 [ant].jar
-rw-r--r-- 1 root root 566376 Apr 1 2008 [commons-collections].jar
-rw-r--r-- 1 root root 107392 Aug 18 2006 [commons-dbcp].jar
[code]...
Red Hat :: Command Line Prompt But Not The Correct Bash Prompt?
Feb 2, 2011I'm running Red Hat Linux 5.4 on HP DL580 server with 16 processors and 64 GB of RAM. I'm connecting to the server remotely through SSH. after entering the password, it takes time to return the command line, if I click ctrl+c during this time, I'll have the command line prompt but not the correct bash prompt (I have to run bash to pass to my correct prompt).I tried to install Apache on the server, ./configure took 4 hours to finish instead of 1 or two minutes, Oracle installation same behavior. Server Disks are mirrored using RAID controller.
View 6 Replies View RelatedGeneral :: Enter The Boot Prompt For Red Hat 5.3 Kick Start?
Apr 5, 2010I have ks.cfg and file.iso burned to a DVD. Both files are at the root of the DVD. Besides that, I also created a folder and keep some drivers in the folder.
I inserted the CD and reboot the server ( which already has a red hat 5.3 that I installed before, I want to erase it using kick start ).
Howver, I just can't get into the much said "boot prompt".
Do we need to press certain hot key during certain stage of reboot?
General :: How To Use Command Prompt To Open Them
Sep 6, 2010After contracting malware on Vista i decided to switch over to Linux and chose to start of with Ubuntu because of the graphical interface. that being said, you have no doubt inferred that i have no coding experience. basically i was hoping to find some nice tutorials and sites for Ubuntu. Also, i did downloaded the suggested programs and patches but im still experiencing problems with Adobe,flash, and and opening .exe files. for the latter, when i click on .exe files it is equivalent of using explorer on windows so i was wondering how to use the command prompt to open them. supposedly linux is susceptible to malware so if you could please suggest a anti -malware program.
View 14 Replies View RelatedGeneral :: Finding IP Address Using Command Prompt?
Apr 4, 2010I'm looking for a way to get my IP address using the command prompt in Linux. I know when you type "ifconfig" you can get your local IP address (i.e. 192.168.0.103), but I'm looking for my IP address that I get from my ISP. How can I get this from Linux without having to visit some website?
View 3 Replies View RelatedGeneral :: Formatting The BASH Command Prompt?
May 6, 2010I would like to change the formatting on my BASH prompt from this:
anon@machinename.domain.poo:~/some/very/annoying/long/path$
to something like this:
anon@machinename.domain.poo:~/some/very/annoying/long/path
$
The idea is that I would be able to type a reasonably long command on one line without it wrapping to the next line so quickly.
General :: Export Is Not Working On Command Prompt?
Aug 26, 2010The command export is working inside a shell script, but when I type it at the command prompt / terminal it doesn't work. "export: The command not found" error is displayed instead.
I tried this:
cat test.sh
Code:
abc=123
export abc
echo "Exit status of export abc: $?"
[code]....
I tried it before on my RHEL system and it was working. I have checked
Code:
echo $PATH
which is okay. What could be the problem?
General :: Cannot Access Sda1 Through Command Prompt
Apr 7, 2011I am trying to access another partition on my drive through the command prompt. I have tried to access it through the /dev directory but when I input "cd ./sda1" or "cd /sda1" it says no such file or directory.
View 8 Replies View RelatedGeneral :: Command Prompt Missing In Terminal
Jul 15, 2010Something unfortunate just happened. I was editing the bash file from my terminal and changed a source. After this I was no longer able to input commands for interpreting in the terminal.
View 13 Replies View RelatedGeneral :: Dynebolic Showing Only Command Prompt?
Mar 18, 2010I am trying to install Dynebolic 2.5.2 on my system.I copied the dyne/ folder into root of my partition(ie /) and updated grub as follows:
title Dyne
root (hd0,0)
kernel /dyne/2618ckld.krn root=/dev/ram0 rw load_ramdisk=1 max_loop=64 vga=788
initrd /dyne/initrd.gz
But on rebooting into dyne ,I get a command prompt .A part of what i saw is given below:
root:[!] you can safely reboot now or wait to enter a maintenance shell.
VOLATILE MODE : : opening a shell in ramdisk.
you are entering a maintenance sector whatever that means
[code]....
General :: Executing A Program From Command Prompt?
May 27, 2011I'm trying to run an application from the command prompt. I've set the path in .bashrc. My executable file and all other files needed by it are saved in the same directory as the path. When I enter the executable name to run it, I get an error message saying that the command is not found.
View 14 Replies View RelatedGeneral :: How To Pass Argument From Command Prompt?
Jan 5, 2011when I am running the script below,it performs on whatever logfile u type ,i.e, ./scriptname logfilename.But how do I convert it into a function and then call it from another script.I mean how do I prompt the user to enter a logname and then capture the name in the function and when calling this function from another script how do I pass the parameter.
View 3 Replies View RelatedGeneral :: Connect Sqlplus Through Command Prompt
Nov 29, 2010I am working as oracle DBA on 10g . Till last day I had worked on windows platform. Now my company want me to work on Linux platform. I am first time using Linux dont know A,B,C of Linux . I want to connect sqlplus through linux command prompt. I have exported enviornment variable of oracle but I am getting permission denied Below mention steps I ahd followed . Please help me to solve it
[oracle@bhel1 mj]$ ORACLE_SID=V7;export ORACLE_SID
[oracle@bhel1 mj]$ ORACLE_HOME=/usr/lib/oracle/v7/app/oracle/prod
ver;export ORACLE_HOME
[oracle@bhel1 mj]$ PATH=$ORACLE_HOME/bin:$PATH;export PATH
[oracle@bhel1 mj]$ NLS_LANG=AMERICAN_AMERICA.AL32UTF8;export NLS_
[oracle@bhel1 mj]$ LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_P
LIBRARY_PATH
[Code]....
General :: Run One Command As Different User Without A Password Prompt?
Aug 4, 2010I need to run one command as different user with out a password prompt.
I did this
Code:
one localhost= (two) /usr/bin/whoami
This work but it prompts for password. Is there a way that can be done with NOPASSWD option ?
General :: View Cookies From Command Prompt?
Mar 11, 2011I was curious if I would be able to view cookies from a command prompt when ssh'd into a machine. On a test machine running fedora 13, I found that the cookies were stored in a cookies.sqlite. I made sure that all instances of Firefox was closed and attempted to view the file running the following command
sqlite3 cookies.sqlite
It loaded but I was unable to run view any of the information because the database was locked? There were no instances of Firefox running and I check to make sure there were no services of Firefox running as well. Am I doing something wrong? Is this not the correct way to view cookies from the command line ? I have tried google searches and has since been unable to come up with anything.
General :: Command Prompt Ftp To Ftp Server Running On Windows?
Dec 27, 2010I am using on Windows Vista, Filezilla server. I have it set up to be accessed via outside IPs and when I use a client on the IP I have it connects normally using Filezilla client. On the same machine I have Ubuntu running in a virtual box and when using filezilla client in there it works fine. Now I want to try the command prompt. So I do the ftp xxx.xxx.xx.xxI enter the name and password and i get the ftp command prompt, but the commands are not working properly. when trying "ls" or "cd" these commands do not work. "cd" tells me that the current directory is "/" root, but this does not make sense in the windows operating system. Now the filezilla client is taking the user in the application window directly to the root folder of the permitted filespace granted to that user. How can the same be done from the command prompt, if there is a way? It is as if the command prompt takes me to the root which does not exist or even have correct permissions to move in. Is there any way to be taken to the correct directory directly, or move there especially when the slashes are the wrong way around etc?
View 1 Replies View RelatedGeneral :: Uploading Files To S3 Account From Command Prompt?
May 6, 2011I've got several large files sitting in my linux hosted account that I need to upload to my S3 account. I dont want to download them first and then upload it into S3. Is there any way I can "upload" it via the linux command line environment? Or access it via a website working with lynx?
View 1 Replies View RelatedGeneral :: Printing A PDF From The Command Prompt Doesn't Work?
Oct 29, 2010I have a PDF that I built using BIRT, and that works fine. At this point I'm trying to print it using lpr or some other command. It seems as though I should just be able to type lpr invoice.pdf and it should print to the default printer. However, lpstat -t shows "Empty print file!" for the printer, and the printer doesn't do anything, let alone print the file. lpr -l invoice.pdf prints the file, but unformatted - just a bunch of characters and whitespace on a seemingly infinite number of pages.
View 2 Replies View RelatedGeneral :: Showing Date On Command Prompt Line?
Mar 1, 2011i need to add the date of the root of the command prompt line, i can get it show to the date for any user how do i just do it for root? and i added it to the .bash_profile file
export PS1='[`date +%D` u@h W]$ '
General :: Type Anything In The Command Prompt Of VxWorks Console
Jun 4, 2011This is a problem regarding VxWorks. Sometimes i am not able to type anything in the command prompt of vxWorks console.
-> if i type anything here, it takes it as an enter key>
-> Why is this behavior? It doesn happen always. Any bug in vxWorks?
General :: Data Recovery On HDD - Command Line Prompt
Feb 11, 2010I installed Fedora 10 on a pc I built from a barebones package, I have had no problems over the past couple months until recently. When I start up the pc the OS lags on a black screen with the cursor blinking. I have searched forums but I guess since I am a newbie I am still lost in the translations. What I am trying to do is save my files that are on the pc to a DVD-RW or my external hard drive before I have to reinstall the software again.
My questions are as follows:
How can I locate the files on the hard drive? When I have the bootable cd-rom inserted I am unable to locate the HDD. How can I transfer my files using the command line prompt? Finally, is it possible just to upgrade to the latest Fedora without losing my files and going through the data recovery process head ache? Or can I reinstall the OS and not lose my files?
General :: Send A Message In RHEL4 ES Thru Command Prompt?
Mar 18, 2010I am working on RHEL4 ES server. In our system Talk is not activated(i did not find it in services). To send a mail thru web based mail it is time taking process. I want to send a message(or a mail) to other server. How can I do this? Example: my server IP is 10.xx.xx.xx and the other is 10.xx.xx.xx
View 1 Replies View RelatedGeneral :: Rename List Of Files From Command Prompt?
Feb 18, 2010Suppose I have the following files:
1132_1_fr.mp3
1132_2_fr.mp3
1132_3_fr.mp3
.
.
.
1132_3_fr.mp3
[Code].....
So I want to add PD_ to those who dont have this preindex and get rid of _fr.
basically rename files in a same directory!!
General :: Copy Code From Text File To Command Prompt?
Dec 2, 2010First I hope to undrestand my English word because Iam Arabic girl and not so good in English...
my problem is:
I wrote code in .c file and I run that code on the prompt command, its ture but I want after the out put copy the code on the command by some statment in the code , how can I do that?