I would like to pipe a raw email from cPanel to curl, using curl to send the raw email via a post variable.wever, I am unsure of the command line syntax that would receive the piped email and post using curl.Ideally, the email would pipe to the curl command "curl -d 'emailvar=RAWEMAILHERE'
View 2 RepliesIs there any curl API to configure only the required protocol. If I have proper openssl installed, the installed curl will have all the protocols (like HTTP, HTTPS, FTP, File etc...) supported by default. Is there any way to allow or disallow only some of the protocol at the runtime. Say I need to support only HTTPS, FILE and I dont want to allow HTTP. Is there any way to do this?
View 1 Replies View Relatedhave some problems in doing my project, my project title is ' in investigate into implementation of certification authority with small network ' ( with using Postfix, openSSL ) and i have builded up two different networks using debian and after that i need to make a mail server, so i configured Postfix and made a mail server, i can send and receive emails on both networks. now i need a shell script on received emails using Postfix, like mail is coming from outside then will go to pipe and there should a script in bash, that will run and check the email and deliver to others, or throw it away some thing like that... here are some links where i was looking
[URL]
I am looking for an email client with the following specifications. I have trialled most of the commonly recommended clients but have found ongoing irritations that push me to keep looking.
Specifications
1. specific email client, not PIM
2. can run as a portable application or configuration files and mail can be stored remotely
3. minimal or no dependences
4. can scan for viruses
[code]...
Evolution matches 5, 6 and 9. The program is a good general client but slow and glitchy. Can't scan for viruses in emails. Kmail matches 1, 4, 5, 6, 7 and 9. Does most of what I need with the powertools plugin but does not play well with Gnome. The program comes with too many dependencies that makes it very hard to move data around or even use on various machines. The dependence on the akonadi server is quite frustrating and makes this kde application a great product but only really useful on kde. Thunderbird matches 1, 2, 5, 8 and 9. Again reasonably comprehensive but lacks the basic ability to scan incoming emails (filters can pipe incoming data to an external program). The fact that the mail is intrinsically linked with your Mozilla profile makes working with the email file very difficult.
Clawsmail matches 1, 2 (old version), 3, 4, 5, 6, 8 (Windows Port old and not maintained) and 9. Looks good but appears to lack portability and a current windows version. I want to check my mail (predominantly POP accounts), have spam and viruses set aside/deleted/quarantined, have my attachments saved to a directory so my mailbox does not get too big and for the emails and configuration data be stored in a distinct directory that can be readily synchronized between computers. The program should be able to run on Ubuntu and Windows XP/Vista/7, on the same data once the data directories are synchronized. And no, I don't want an Internet based option like gmail or yahoo.
I've written a simple server in linux used fork to create a FIFO pipe.The server create two FIFO pipe.One for server read data from client and write data to client.Then another pipe for client read data from server and write data to server.When the server read data from a client used server-pipe and then write data to client.But ,if the client no read open the pipe,the server side write will be crashed because of a broken-pipe SIGPIPE. How to check whether the read side is opened?Or,how to catch the SIGPIPE,and then my server will still execute on,not crashed!!
View 5 Replies View RelatedI'm doing ping between 2 RH servers through a VPN site2site tunnel and in some times I got in the result pipe 2 and another pipe 3 as I mark it in blue color below.
e.g.
64 bytes from 192.168.1.10: icmp_seq=0 ttl=128 time=0.229 ms
64 bytes from 192.168.1.10: icmp_seq=1 ttl=128 time=0.287 ms
64 bytes from 192.168.1.10: icmp_seq=2 ttl=128 time=0.278 ms
[code]....
What's the difference between pipe 2 and pipe 3 and what's the meaning of it?
After I spent some time discovering The BIG BANG of Universe and The Meaning of Life :
I managed somehow to create a script to make some backup of files on server and TAR it and then FTP the archive to another location FTP server and then emails result.
It also measures time needed to complete it and deletes archive older than XX days (set in find -mtime +20) and makes incremental backup every weekday and FULL on Sundays (which suits me bcoz no heavy load).
Files for TAR to include and exclude are in txt files listed each line separate name:
file: including.txt:
using variables in CURL.Here's my code:
transfer_to_pcid="AAAAAAAA"
transfer_from_pcid="BBBBBBBB"
basic_password=`ssh rsync@some_test_domain 'curl --silent
[code]....
we got godaddy VPS working and however.the strange thing is that we don't have CURL installed by default.we should get it with the server itself. but we didn't we have root ssh access. i saw this post: [URL] but it didn't worked for me.
SYSTEM INFO:
PHP Built on: Linux ip-myiphere.ip.secureserver.net 2.6.18-028stab059.6 #1 SMP Fri Nov 14 14:01:22 MSK 2008 i686
PHP Version: 5.3.2
Web Server: Apache/2.0.63 (Unix) mod_ssl/2.0.63 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635
Web Server to PHP interface: cgi-fcgi
In my Windows environment, I use email client such as Microsoft Outlook to connect to our email server to send email with the following configuration:
Incoming server (POP3): 995 - (requires with SSL)
Outgoing server (SMTP): 465 - (use encrypted connection SSL)
[code]....
And the mail server requires user ID login and password.how do I setup a text command based email client in my Linux (Centos 5.1) to send out email through the existing email server above, which is in another machine? The email client has to be text command based because I need to use command line to send notification email from anothar application installed in my Linux (Centos 5.1) Since the email client will only be used to send email notification, I don't require setting up of an email server in my linux.
Using CentOS. I have a cron setup to run this command: Code: /var/test.sh | mail -s "Test Cron" mr182@somewhere.com The email is sent but the output of the script is not in the email body, it's just blank. I know there is some output because there are some echo statements in the script.I don't want to get an email for all cronjobs, just this one.
View 1 Replies View RelatedI have an email setup where all of the emails from our email host is downloaded to our Linux server using Fetchmail. Then some of the incoming emails are sent to an MS exchange server (server1.domain.com) using Postfix. What i want to do is to send a copy of all emails to Another server (server2.domain.com) for redundancy.Can postfix be configured to send copies out to both?
View 1 Replies View RelatedI would like to find out how I would use both curl and wget to sent an http post to get the hostnames of a few servers. I know am not even given any work of anything I have done, but the reason is that I am really lost, and I do not even know how to start it.
View 4 Replies View RelatedI'm using cURL in ubuntu to download some files like
While some files may be missing from this sequence but when I just use curl -O [url]
cURL will download a 404 error page for those missing ones. How can I avoid this?
I need to download a file from a website which has a URL formatted like:
[URL]
This redirects to a .zip file which has to be saved. There is also a need to authenticate based on username and password.
I tried to use wget, curl and lynx with no luck.
UPDATE:
wget doesnt work with redirection. It simply downloads the webpage instead of the zip file. curl gives the error "Maximum redirection exceeded > 50 " lynx also gives the same error.
I'm on Ubuntu 11.04. I have read around about how to use curl to download a list of URLs from a text file, and everyone says to use Code:curl -K URLlist.txt. This is what the curl man page says as well. However, for even a simple file with one URL, this command outputs a bunch of weird symbols for me instead of downloading the file.For example, I have a text file "test.txt" with one line in the following format:
Code:
url = "http://www.example.com/image.jpg"
I use the curl command to download this file:
[code]....
i'm a college student studying pc programing, and i was given today a special work and i have to program using miranda... which i've never used it >.< can anyone give me a hand to where to download, how to compile, and a simple tutorial for making a simple program or something?
View 3 Replies View RelatedI am trying to encrypt a file on-the-fly, redirecting the output to a named pipe [fifo]. I SSH into my server and run the command:mcrypt -k key < file > named_pipethen from my laptop I try to scp it:$ scp me@server:~/dir/named_pipe d it says scp:users/home/me/dir/named_pipe: not a regular file
View 1 Replies View RelatedI'm on the command line, as the install for the proprietary ATI driver has failed. I'm following the instructions for troubleshooting here but the pipe "|" key is not working - a tilda "~" shows up when I press it.I'm wondering if this is because of the keyboard being set as UK instead of US? I did have to change this setting at the graphical login initally, whether from choosing this setting by mistake or the installer choosing it automatically when I chose English UK for the language.
View 3 Replies View RelatedWe want to kill a process provided that only process name is given and we are to first find out the process id and then kill the process. Yes, in one go! That is, using pipe.
So, I tried this (the bold text):
[Code]...
I have a text file containing the URL I wanted for mplayer to play. Currently, I play those in commend line using the following steps:
1)cat playlist
2)use mouse to highlight the link
3)type: mplayer then click both left/right mouse button
I was hoping if I can do this in comment line without mouse. I've tried the following without luck. (assume there's only 1 address in the text file)
1) cat playlist |mplayer
2) cat playlist |awk '{print $1}'| mplayer
I don't quite understand how pipes work in bash. I know that it takes an output from one command as the input in another command. What an output is I can get because it's what the command prints out to the screen. But how do I know what input a command will take? Here is an example I thought would work:
Which gem | rm
Unfortunately it didn't.
Which gem prints out "/usr/bin/gem" so that must be the output right? I thought that was given to rm so it would be "rm /usr/bin/gem" but I was wrong. How do I know what input a command takes?
I have two Linux processes communicating via a nameless pipe. How can monitor the traffic in the pipe? How can I inject data into the pipe? I have root access and know the pipe inode.
View 2 Replies View RelatedI'm storing a list of strings in a file and would like to read the file and pipe each line returned to grep which in turn searches a directory for files containing the string.However this is not returning any output.
View 2 Replies View RelatedTwo processes are communicating through a pipe: A | B. A is writing data faster than B is reading it in. Is there any way to have A limit its writing rate to match B's reading rate?
AFAIK the pipe will get full, and will make A's writing block, waiting for B to read in more data. But is there a way to limit A's writing rate before the pipe fills up? (In a way it's like having a pipe with a really small capacity, but as far as I know pipe capacity is a constant compiled into the kernel.)
Code:
EXAMPLE FOR CLARIFICATION
Right now the command is printing out the following in 1-second intervals:
But with flow control it should print out (again in 1-second intervals):
...since "date" would block on the writing loop due to the slow reading loop.
this is the simple backup script which i used to take backup the databases of my clients
Code:
#!/bin/bash
date=`date +%d-%m-%Y_%H.%M.%S`
[code]....
I need to pipe the output of date command, to form a command like this:
mycommand -f 20110721
where 20110721 is current YearMonthDay.
How can I pipe the output of a shell command into a new buffer in Vim? The following obviously wouldn't work, but you can see what I'm getting at:
:!echo % | :newtab
I have an OLED screen on my laptop that I have configured to show status information. The current driver I have installed in Linux for it is able to display messages by sending them to a script as an argument separated by spaces.Example: the command /opt/asusg50oled/utils/notify.sh Hi Everybody "Hello World" displays on the oled screen:
Hi
Everybody
Hello World
If another message is sent before the old ones disappear and it reverts to status info, it pushes off the top message. Example: less than 30 seconds after the previous example, /opt/asusg50oled/utils/notify.sh "Bananas have potassium" is executed:
Everybody
Hello World
Bananas have potassium
What I want to do is have kernel messages (the kind you see by running dmesg) forwarded to this script. For example, when I insert a USB drive, the following information would show on the OLED screen as they're logged:........
I am tying to read a file in with nawk whilst trying to take input from a pipe. I've come across the getline option and no matter how hard I try, I can't figure out the correct syntax. What I want to do is to take some input from the pipe and make a comparison with all of the values in a file and print a match.
Code: