General :: Second NIC Not Recognized In RHEL5?
Jan 3, 2011
I have installed a second NIC to my Desktop on LINUX (Oracle Enterprise Linux 5). However, it does not get recognized while I'm performing the install and only eth0 card shows up.
View 5 Replies
ADVERTISEMENT
Sep 18, 2014
I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.
Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.
Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?
View 0 Replies
View Related
Jul 6, 2010
When trying to mkfs -t ext3 /media/HD-CEIU2 mounted drive, I receive "is not a block special device". Then after answering yes to proceed anyway, get messages indicating the device couldn't be read. I did fdisk the drive and rebooted.
View 1 Replies
View Related
Apr 2, 2010
I am newbie in Linux, using RHEL5. I created an account for user. User cannot log on from GUI but able to log on from command line by (ctrl-alt-f1). As a root I can log on from GUI mode.
View 2 Replies
View Related
Feb 4, 2010
i want to install dns in my pc. all configurations in a broad way
View 7 Replies
View Related
Jan 8, 2010
I am using RHEL 5 or 5.5 version as my os. I want to assign more than one ip for that machine. I am very new to linux.
View 7 Replies
View Related
Jan 28, 2010
I have installed Dlink-DWL-G520 in RHEL5 - kernel 2.6.18-8.el5. Now I want to give WEP key to get IP from my wireless accesspoint. How I can give that key?
View 1 Replies
View Related
Mar 22, 2010
I want to make a snapshot of RHEL5 about my current situation ,how will I do that ?
View 3 Replies
View Related
Apr 8, 2011
I'm isntalling VLC on RHEL5 via
Code:
sudo yum install vlc
this gives me the following dependencie errors
Code:
--> Processing Dependency: libdvdread.so.3()(64bit) for package: vlc
---> Package x264.x86_64 0:0.0.0-0.4.20101111.el5.rf set to be updated
--> Finished Dependency Resolution
vlc-0.9.9a-7.el5.rf.x86_64 from rpmforge has depsolving problems
[code]....
View 2 Replies
View Related
Jul 16, 2010
What is the difference between a Partition and a Volume in Redhat Linux 5?
View 2 Replies
View Related
May 21, 2010
I have rhel5 running ok and windows7 running ok, and currently access both via grub (both os are on separate disks) I want to be able to switch between both without rebooting. xen is installed and working but I cannot configure windows to run as a guest as xen wants an iso or img file.
View 1 Replies
View Related
Apr 5, 2011
I installed redhat enterprise Linux 5 on an acer laptop to dual boot with windows vista the nic works perfectly with windows but does not work with the RHEL5.
View 4 Replies
View Related
Apr 7, 2011
How to see/scan new EMC SAN lun/disk in RHEL 5?
View 1 Replies
View Related
Aug 12, 2010
i am not able to use wireshark in rhel5.0
View 2 Replies
View Related
Feb 10, 2011
The new Red Hat release takes advantage of the latest Intel and AMD processors as well as advancements in virtualization and Windows interoperability.
View 4 Replies
View Related
Dec 22, 2010
I have a Multitech MT9234ZBA-USB modem. The CD included RHEL drivers which I have installed with RPM. The lsusb command output shows the modem: Bus 004 Device 005: ID 06e0:0319 Multi-Tech Systems, Inc.Which communications software should I use to connect to the modem and issue AT commands?
View 4 Replies
View Related
Dec 24, 2008
i wnt to know how to configure nat server in rhel 5 i have net on eth0 so hw can i share net on my lan through nat server
View 3 Replies
View Related
Feb 8, 2011
i am using RHEL5,so i like to use console/terminal that's why i want to browse internet on terminal window of RHEL5 pls suggest me the right answe.....
View 4 Replies
View Related
Dec 16, 2010
I'm trying to mount a USB key in a RHEL5 box to upload some file. I found doc online and followed it and mounted it fine the first time. Then I unplugged it and found that I have another file to upload so I plugged it back in. However this time it's not assigned a partition (last time was sdb1) and I can't mount it anymore. I think the USB key is recognized and the driver is installed properly:
[code]....
View 6 Replies
View Related
Nov 16, 2010
i m using RHEL5 ......but only prob i m facing is that there is no sound in my system.
[root@localhost ~]# /sbin/lsmod
Module Size Used by
deflate 7873 0
zlib_deflate 21977 1 deflate
[code]....
View 4 Replies
View Related
Apr 17, 2011
what is the difference between rhel5 and rhel 6?
View 5 Replies
View Related
Oct 26, 2010
I did a yum install libxml2 then later had to do a yum remove libxml2
on my rhel5.5 machine. During the course I answered 'y' to one of the questions asked, which may have lead to the problem I'm about to describe - I don't know because I can't reproduce the problem at the moment.
After doing the 'yum remove libxml2', which seemed to complete successfully, I tried to do a 'yum search <some other package>' and a 'yum install <some other package>' - both commands failed. The error message I get is
[root@server etc]# yum search libxml2
bash: yum: command not found
[root@server etc]# which yum
/usr/bin/which: no yum in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/bin:/bin)
I'm afraid during the 'yum remove libxml2' I must have removed some essential system libraries and applications, including yum.
View 2 Replies
View Related
Jun 2, 2010
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies
View Related
Apr 22, 2010
i am in the process of installing apache 2.2 with php 5.3.2, my problem is that after installing and configuring them , this important module libphp5.so is no where to be seen under /usr/local//apache2/modules/, so when i attempt to start or stop apachectl , i get the following errors ..
httpd: Syntax error on line 54 of /usr/local/apache2/conf/httpd.conf: Cannot load /usr/local/apache2/modules/libphp5.so into server: /usr/local/apache2/modules/libphp5.so: cannot open shared object file: No such file or directory
this is how am loading the module in httpd.conf
#LoadModule php5_module modules/libphp5.so
why isn't this file there . is there a way i can get this to work
View 2 Replies
View Related
Jan 12, 2010
I want to configure a PXE Install Server with RHEL5u3 64bit.
View 1 Replies
View Related
Feb 18, 2011
How to avoid/resolve this problem. after i input user/password the VNC screen will just have a cursor
View 1 Replies
View Related
Apr 17, 2011
How can I check my samba version in red hat 5.
View 1 Replies
View Related
Apr 23, 2010
I want to access shared directory of windows xp from redhat linux. I share 'd:' drive from windows machine.
View 3 Replies
View Related
Mar 26, 2010
How to check server usage (process and memory) for last 4months in RHEL5
View 3 Replies
View Related
Aug 6, 2009
Please let me know what configuration need to be made so that root user
will not be able to log in via gui.
I am aware that taking out tty? from /etc/securetty would result in root not able to log in via CLI modes.
Similarly what is the configuration needed to make that work in GUI.?
View 4 Replies
View Related