General :: Remove Kde Splash Screen And Maintain Ubuntu?
Mar 15, 2010How do i remove the splash Kde splash screen and maintain the ubuntu splash
screen?
How do i remove the splash Kde splash screen and maintain the ubuntu splash
screen?
I am trying to remove the splash screen on Karmic Koala. I have tried removing quiet splash from the kernel entry and then running update-grub from /boot/grub/grub.cfg. It didn't work and it looks like Grub is putting quiet splash back in. How do I remove the splash screen?
View 2 Replies View RelatedIf I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies View RelatedSince updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies View RelatedI'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies View RelatedI am running mint 10 on a lappy and do recall doing this earlier but I can't remember how I did it (just liked the look of the rolling text rather than the splashscreen).
View 2 Replies View RelatedThe problem is simple. On Karmic, I had this wonderful splash screen, and it was fully customized. But once i reinstalled at lucid (my computer's HDD fried and it was under warranty), I didn't even get the standard ubuntu splash. If Someone could help me to get the splash screen back, i can do the rest.
View 10 Replies View RelatedI'm currently running Linux Mint 10. Since I have an nVidia graphics card, I installed the driver and used this fix to fix the Plymouth bootsplash afterward because it was in text-mode for the bootsplash. I have since installed and configured e4rat to cache files at boot. It seems to have sped up things considerably, but has also re-broken my bootsplash. The resolution is correct, and plymouth is running, but the splash doesn't show.
Is there a way to get Plymouth using the uvesafb driver AND play along with e4rat?
I am using 64-bit Linux Mint. My copy of e4rat is compiled from source because the prebuilt package was 32-bit only My graphics card is nVidia 9800M GS (notebook) The splash screen appears during shutdown as it did before. It's only the boot splash that is affected.
I had ubuntu 9.10 I upgraded to 10.04 after solving some problems (freeze at boot).
Since then, I don't have the ubuntu's logo showing up when I boot, but a purple screen with some blinking pixels. I didn't care much about it... but today my computer took too long at that screen (normally it was just 1/4 second, but today it was like a minute..). And it happened like 4 or 5 times in a row (Only at the 5th time I realised that it was not freezing up, but it simply would took more time)
After a reboot, it is again 1/4 second of purple screen but I don't want this problem to return.. so I want to get rid of the purple screen (I think it is an indicator of the problem)
Well, I already installed the graphic drivers (going to system > admnistration > hardware drivers). But it didn't solve anything. (I don't know if it is even related)
I searched in google, found something old (2006) and I think it maybe has some relation with my problems .. [URL]
But couldn't understand the conversation (i'm a linux novice)
My hardware:
ATI Mobility Radeon 4650 HD
P7450 2.13Ghz Core 2 Duo
i have a splash screen i want to use while gnome is loading (well it is a pic rather than a splash) rather than black screen till gnome i use ubuntu 9.04 or macbuntu as i call it (is looks exactly like a mac) so can i use a image while gnome is loading ?
View 3 Replies View RelatedSo I know now that I reach the login screen, and I know to hit control, alt, f1. However, all attempts to reset the resolution have failed. Here's how it went down. I was working with nvidia driver. Already was frustrated I couldn't get a working wide screen setting for my toshiba hd tv/monitor but that's a seperate issue. I was trying to get the driver to recognize my separate monitor to an hd tv in the living room using the video out. works fine with windows. I got it to recognize, it made me save settings, and then restart. Note resolution settings are set to automatic right now. Then when I restart, I get to ubuntu splash screen, it plays the chime, and shows a blank black screen. Control alt f1 brings me the menu.
I have been told to type (this is just quick type, I used the proper commands in reality)
sudo dpkg-reconfigure xserver-xorg.
sudo dpkg-reconfigure -phighxserver - xorg
xrandr --output lvds --mode 1024x768
I found one article that gave a three step process.
sudo cp /etc/x11/xorg.conf / etc/x11/xorg.conf.custom
sudo sh -c 'md5sum ' etc'/x11/xorg.conf > /var/lib/x11/xorg.conf.md5sum'
sudo dpk-reconfigure xserver-xorg.
Nothing gave me any of the results I expected from command doesn't exist to completely irrelevant menus. Start me from the beginning to what I should do. Yes I logged in properly with my username and password to. Do the 'etc' in the command need to be filled with something else like a drive letter or something. I'm so lost, should I disconnect my tv? Also I tried running in safe mode and it said something about display not found.
In PCLinuxOS LXDE how can I change (or stop) the boot up splash screen and is there an icon (or shortcut keys) to force quit (kill) a program like this one for Ubuntu?
View 2 Replies View RelatedIt seems to be locked up. i cant change any settings, im familiar with kde 4.3 as ive been a kde user in ubuntu for a year or two. every single button is greyed out. i mostly have default options setup in mandriva, i just started using it.
View 2 Replies View RelatedI am at a loss trying to figure out the options to not show the scrolling boot messages during the boot-up of Clonezilla. Is there a way to have a loading splash screen or even have a static logo that is displayed during the boot process? I have my automated recovery method all ready to go short this one last feature. I have searched all over and am coming up empty on this one.
View 4 Replies View RelatedI downloaded some software yesterday from the ubuntu rep. This morning my screen has the bottom part of in black there are the KDE docky ,firefox ,terminal & rhythmbox icons ,so is the taskbar..but the wallpaper is cut up ,4cm off. I have noticed that the splash screens res has changed too. It's sharper (smaller). The browser as a consequence is also half lit & having noscript in the bottom without it being visible is a problem. Why has this happened & how can I fix it. The last working config, well that's somewhere else.
View 3 Replies View RelatedWhen I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
Out of nowhere Ubuntu (intrepid, I believe) has stopped loading for me. When it attempts to load gdm the screen starts flashing at the splash screen and then eventually dumps me to the terminal. From there I can login without any problems but can not get the GUI to load.
When I run sudo gdm-binary it does the flashing splash screen again and then spits out the error message: WARNING: Unable to find users: no seat-id found. Then a few warnings about longest graphic displayed 2.5xxx seconds
I tried running sudo dpkg-recondifigure gdm and relaunch gdm as above and it did the same thing.
I was not able to successfully connect to my wireless network through the terminal to try to update in the hopes of that fixing the problem. Perhaps someone can give me instructions on how? (I have tried but can not figure out how to initialize wlan0).
Or, is there something I can do from my installation CD?
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I am running Ubuntu 10.04 on a Intel X25-M PostVille 160 Go SSD drive with ext4. How can I tell if there's something wrong ? What should/can I do to maintain its performance/health ? Should I use TRIM, is Linux recent support for TRIM reliable ?
This may look as a duplicate of this question, but I am more asking in term of good practices and learning how to use this new technology the right way...
The screen that with the background pic at below is it call splash screen?
How to change the screen at above to text based that shows what services have been started, and if the service has been started, it will show ok at the right side.
I installed 10.04 on my Toshiba laptop, but for some reason there is no violet splash screen with the "Ubuntu" word when the system is loading. Instead there is a bald dash in the upper left corner that keeps blinking and then it is changed by regular font dash, then there are some letters (like system is checking something?) and that's it, one second after my desktop welcomes me. What could be the problem? I feel like I haven't had such a problem when I was installing it on another computer. Though it might be because I am installing from USB drive, but not, installed from CD with the image recorded and still the same problem.
View 2 Replies View RelatedI want to set a different splash screen instead of the one that shows up just before and just after I log in (Ubuntu and the loading bar)
I installed gnome-splashschreen-manager and through that I set the splash screen to another jpg image but this doesnt seem to work. I dint see any difference after rebooting. Am I doing something wrong in GNOME Splash Screen Preferences? This method seemed really straight forward.
I have Squid Cache: Version 2.6.STABLE21, installed on RHEL5. as well as configured SARG.
It provides downloading detail of squid users. but does not provide uploading detail.I want to maintain uploading record of my users.(e.g which user upload which file/data)
I installed the beta version of Ubuntu 10.4, and on top of that Ubuntu Studio (for the programs it brings with it); but don't like the splash screen.
How do I disable it? (I tried uninstalling the Ubuntu studio desktop, but it did not remove the splash screen).
*Edit, following Ubuntu studio apps are still installed on my system:
Code:
ubuntustudio-default-settings ubuntustudio-screensaver
ubuntustudio-icon-theme ubuntustudio-sounds
ubuntustudio-look ubuntustudio-theme
ubuntustudio-menu ubuntustudio-wallpapers
Some time ago I installed KDE on my machine, though I use gnome as the default. (I rarely login on KDE) .Since then, when I login in my default gnome I get those futuristic KDE cursors, which I hate by the way. I've been trying to go back to my default cursors but I've had no success. I go to System -> Appearance -> Customize -> Pointer and then I select Default Pointer or even DMZ (white) I click on close twice and nothing happens. I've even removed the "oxygen-cursor-theme" using the package manager. How can I get my default mouse cursors back?
On the same note, before I get the login screen and after clicking on logout/restart I get a Kubuntu blue (splash?) screen, I'd prefer not to get this screen. how to get rid of this, too? (Getting rid of the cursors would be most important, but if I can get rid of this screen it'd be nice, too)
I recently installed from scratch the Lucid Lynx, and after changing the direction of the window buttons and a few things more (who was the idiot who thought on having a purple terminal?), I completely loved it.
I had one problem through, is that when I boot my computer, there is no splash shown. After the GRUB menu, all I see is a black terminal with no text for some time, and then a quick view of some colored text. Does anyone else have this problem? Here is the appropriate section of the grub.cfg file:
Code:
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
[Code].....
I just installed Kubuntu 10.04 on my Desktop computer. Prior to KDM loading, all I get is a blank, black screen with no Plymouth splash screen. I'm confident that this issue is not related to KDE but would apply to all Ubuntu variants. Here are my computer specs:
Kubuntu 10.04 x64 running with all updates
Dell Studio Desktop
Intel Quad-Core Processor 2.66Ghz
8GB ram
Intel Integrated Graphics
I should note that I have full desktop effects running smoothly under KDE with compositing enabled, so my integrated graphics is not necessarily the problem unless Plymouth is not loading the graphics drivers successfully.
I have poured over many forums and countless posts on how to do this and i cant seem to get it,i have been trying for the past 8 hrs to change the splash screen in my ubuntu 10.04 lts lucid lynx,i have installed startup manager and splash screen and have tried using those to edit my splash screen to no avail i have no idea what im doing wrong
View 2 Replies View Related