General :: Read-Only Shared File From Ubuntu
Feb 3, 2010
I have encounter problem about opening a file sharing. The situation goes like this.....
1. A folder and file from ubuntu has a both permission to write,read and execute to a specific user which is i added in a group.
2. When i open a file from ubuntu to my Windows Computer i can edit and save and then close the file. But when i open it again the file and edit then save the problem goes to Read-Only I cannot save the file.
3. When I check again the folder and file permission to read, write and execute and then I can access the file again edit and save.
What are the probable cause of this problem to Windows? Ubuntu to Ubuntu there is no problem accessing and saving a file.
View 26 Replies
ADVERTISEMENT
Jul 12, 2011
I've created quite a predicament with my desktop installation and would prefer to be able to salvage it instead of having to reformat/re-install Ubuntu.
Quite a lot happened and here's my best recollection:
- My Ubuntu installation stopped working and I could not get the desktop to load.
- I backup up my entire home directory by creating a zip file along with other small zip files. I used Alt + Del + F1 to get the CLI to do this.
- I then did different things trying to get the desktop to load.
- I did a apt-get upgrade, to try and get it to work; this was not sucessful.
- Working through several dependency issues I finally got sudo apt-get ubuntu-desktop upgrade to work, but it did not finish completely. I started to get out of memory errors. I am assuming this was because too much hard drive space was taken up by the zip files I had created
-I could not boot and do anything properly after that. Every attempt to modify the filesystem (to free up space) results in an error "Read Only File System". The root file system was not being mounted and I would see root@none on the CL
- Looking on the boot loader I now have Ubuntu 9.10 2.6.24-generic installed
- I burnt a new installation of Ubuntu 10.4 LTS
- Using Live CD I tried to see if I could free up some space and get the system back to more stable state,
However this was NOT sucessful. I tried to mount my drive by sudo mount -t ext3 <dev> <dir> but I keep getting the following error: error while loading shared libraries: /lib/libsepol.so.1: cannot read file data: Input/output error
View 2 Replies
View Related
Feb 4, 2010
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies
View Related
Jan 15, 2010
how to install libxcb-xlib.so.0?When I start one software and it complains that
"error while loading shared libraries: libxcb-xlib.so.0: cannot open shared object file: No such file or directory"
I have lastest libxcb1 installed and searched in my system but didnot find a relevant result.
View 3 Replies
View Related
Jan 17, 2010
I installed the latest Gimp beta and it worked fine but then I couldn't open it. I removed it and I reinstalled but it didn't work, so I installed the latest stable version (no beta) and it still does not work, when I open it form Terminal, this is the response:gimp: error while loading shared libraries: libbabl-0.0.so.0: cannot open shared object file: No such file or directory
View 3 Replies
View Related
May 14, 2010
I upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
View 1 Replies
View Related
Feb 11, 2009
I am using Centos 5.2, and I installed all of the available gnome and gnome development libraries available via the "add software" menu item. Still, when running some programs, I get the following error message:
"error while loading shared libraries: libzvt.so.2: cannot open shared object file: No such file or directory"
If I understood it correctly, libzvt.so.2 is part of some gnome libs... where to find and how to install them?
View 5 Replies
View Related
May 5, 2010
just installed Ubuntu 10.04 and installed the flightgear package and the fgfs-base package. I ran fgfs from a terminal and got this error:
Code:
$ fgfs
fgfs: error while loading shared libraries: libOpenThreads.so.12: cannot open shared object file: No such file or directory
$
So then I did:
Code:
sudo apt-get install libopenthreads12
and it gave me these errors:
[Code]...
View 1 Replies
View Related
Aug 3, 2010
I'm trying to run Kega Fusion on my laptop, which can now FINALLY run Linux (ATI drivers finally work on it), and I can't get the emulator to work..
Code:
brandon@brandon-laptop:~/Desktop/Fusion$ ./Fusion
./Fusion: error while loading shared libraries: libGLU.so.1: cannot open shared object file: No such file or directory
brandon@brandon-laptop:~/Desktop/Fusion$ uname -a
Linux brandon-laptop 2.6.32-24-generic #38-Ubuntu SMP Mon Jul 5 09:20:59 UTC 2010 x86_64 GNU/Linux
brandon@brandon-laptop:~/Desktop/Fusion$
Help? I have the ATI proprietary drivers installed. I tried without them and it still wouldn't work. (And OpenGL is seemingly working as Compiz Fusion is running. I also tried with Compiz disabled but the same error pops up).
View 3 Replies
View Related
Aug 21, 2010
I'm running lucid 32-bit. I get this error when I try to run the installer for Unreal Tournament GOTY:
Code:
Verifying archive integrity... All good. Uncompressing Unreal Tournament 436-multilanguage.goty Installer. /home/computer/.setup1548: error while loading shared libraries: libgtk-1.2.so.0: cannot open shared object file: No such file or directory computer@computer-desktop:~/UnrealInstall$ I tried installing libgtk1.2 (as told by some people in other threads), but couldn't do that:
Code:
E: Couldn't find package libgtk1.2
However, I checked that I do have libgtk2.0
So what should I do?
View 2 Replies
View Related
Jun 10, 2010
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
View 5 Replies
View Related
Mar 28, 2010
I'm trying to install PCSX2 (PS2 emulator) and I get the following error: ./pcsx2: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
I've followed the instructions here http://pcsx2.net/downloads.php and believe I have all the dependencies installed. My system has the following file:
/usr/lib/libgtk-x11-2.0.so.0
View 6 Replies
View Related
Mar 2, 2010
I have an application consisting of different processes and all these processes are linked to shared libraries. I start the application (spawn all the different processes) as say user1. Now with the application up, if I run a process p1, the process gets activated and works. However, if I start the same process p1 as a different user, say user2, which is completely different from user1 the process complains of
"error while loading shared libraries:...."
I set LD_RUN_PATH both in compile and runtime environment. LD_LIBRARY_PATH is set correctly in both places.
All the above works if I set the absolute path of the required shared libraries in /etc/ld.so.conf file and rebuild the /etc/ld.so.cache
View 1 Replies
View Related
Aug 16, 2010
Alright, just loaded a fresh copy of OpenSuSE 11.3 x64, went to update manager and let it update, came back and computer was shut down. After booting it back up, I cannot update any software, nor run any commands.
Here is my output:
Code: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory I've tried searching for this error, some people came back saying to run this:
Code:
But all that happens is this:
Code:
Nor ls work either so I'm stuck and thinking about a reinstall.
I don't understand how this system could be so messed up after a failed update.. Used to trust SuSE, not sure anymore after this incident..
View 4 Replies
View Related
Nov 9, 2010
Installed Skype but it wont launch. Running the latest Opensuse Gnome. Ive uninstalled it and reinstalled several times but always with the same error. When I try to run it from terminal I get this:
ig@linux-ljqk:~> skype
skype: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
Ive just now uninstalled skype and tried reinstalling it again via yast, but now I get the following error [PK_TMP_DIR|dir:///var/tmp/TmpDir.xftzR0] Repository already exists.
View 9 Replies
View Related
Jan 26, 2011
After finally getting my wireless/graphics drivers working yesterday (thanks to this forum ) I startx to realize that not a single KDE/Qt application will launch, along with Firefox, or Chrome/Chromium. (I did a full install from the DVD, not deselecting anything, and when I upgraded to -current, I also did the same.)
Ark said:
Quote:
ark: error while loading shared libraries: liblzma.so.0: cannot open shared object file: No such file or directory
but I managed to fix that one by commenting out 'aaa_elflibs' in /etc/slackpkg/blacklist (on a recommendation from #slackware), and running slackpkg upgrade-all again, but that's the only one (afaik) that was fixed. Ark still doesn't work, but it doesn't show that error anymore. When I run it, a box pops up that says "Unable to find Ark's KPart component, please check your installation."
Kate still says:
Quote:
kate: error while loading shared libraries: libkemoticons.so.4: cannot open shared object file: No such file or directory
Now, konsole, firefox, and Chromium's errors are a little different.
Konsole:
Quote:
konsole: symbol lookup error: /usr/lib/libphonon.so.4: undefined symbol: _ZN9QMetaType15registerTypedefEPKci
Firefox and Chrome basically say the same thing
Quote:
/usr/lib/firefox-3.6.13/firefox-bin: symbol lookup error: /usr/lib/mozilla/plugins/skypebuttons.so: undefined symbol: _ZN9QListData11detach_growEPii
again, I am completely baffled here, as I had kate, konsole and ark running before I upgraded to -current.
View 5 Replies
View Related
Mar 16, 2010
I want to run blender in Ubuntu910,but get below
test@ubuntu:~$ blender
blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory
View 4 Replies
View Related
Dec 9, 2008
How can I read .gz file direct on shell/terminal without decompressing the file?
satimis
View 5 Replies
View Related
May 23, 2011
i'm new to linux and i am running ubuntu 11.04.i'm trying to install wine. i downloaded the binary files and extracted them. i tried running the command './configure' and got a error saying :no such file or dir. i read the 'readme' file but cannot configure.
View 3 Replies
View Related
Jan 16, 2010
I have Ubuntu Server 9.10 and Windows 98 client. I already installed samba in ubuntu so that windows 98 can access shared files from ubuntu. When I ping both their ip address there is a reply. Ubuntu Server can see shared files from Windows 98 but Windows 98 cannot see Ubuntu Server through Network Neighborhood and their is an error " Unable to connect the network". What are the possible things to solve this problem?
View 4 Replies
View Related
Jul 30, 2011
I have Ubuntu server with Apache 2, PHP, and various DBMSs running in VirtualBox on my Mac host for my web development work. To easily create/edit the files I'm working on, I mounted a directory from my Mac host via the VirtualBox shared directory feature to /var/www/. Every file I create on my Mac host has the following permissions on the on the Server: -rw-r--r-- 1 root root 6 2011-07-30 01:27 test.The problem is that most PHPscripts/frameworks/etc.need write access to some files.It is extremely annoying to have to chmod every new file/directory that needs write access.Is there a way to set the correct permissions for the files/directories automatically?
View 2 Replies
View Related
May 21, 2010
I'm using openSuse11.2. I have been to the software management function and the libjpeg package seems to be installed but when I run a conversion program for a microscopy program: ~/Download/Xmipp-2.4-i386/bin> xmipp_convert_tiff2raw xmipp_convert_tiff2raw: error while loading shared libraries: libjpeg.so.6: cannot open shared object file: No such file or directory.
View 1 Replies
View Related
Feb 6, 2011
I have virtualbox installed, and arch set up as the guest OS now i have made my home folder shared folder with the guest OS but at first my arch couldnt read my home folder.i realized the permission setting for the home folder is set as rwx to myself, and nothing to everyone else.so i chmod -R 755 to everything and that seemed to have solved the problem now i want to make my home folder readonly to my guest OS. do i just do chmod -R 744 to my home folder? i already messed up something when i set 644 to everything in my home folder, as my dropbox stopped working so im afraid of something like that happening to me again, otherwise i d love to experiment
another question is, are .so files supposed to be executable? I googled it, and it seems they dont have to be.But my dropbox stopped working after the .so files in /home/myhomefolder/.dropbox got assigned 644 D:
View 2 Replies
View Related
Apr 12, 2010
I am trying to create a package for Moblin using the Moblin Package creator application in Ubuntu. The RPM package gets created successfully, but when I execute that package in Moblin OS in the terminal I get the following error message: Error while loading shared libraries: libgda-4.0.so.4: cannot open shared object file: No such file or directory.
I understand that the above libraries are missing on my system and I need to add them. My question here is do I have to add them manually after the installation of the package or can the package itself include these libraries and copy them to proper locations when the package is installed. In case the libraries can be included in the package I want to know how that can be done.
View 1 Replies
View Related
May 4, 2011
Is possible to make a folder permission like below?
-User can create files/folders in the shared folder.
-But the files/folders they created, cannot be delete/change by em.
(only can be delete by root users)
-Each new files/folders created will auto owner to root only.
View 4 Replies
View Related
Dec 2, 2010
I'm running Linux lnx3-228 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
red hat linux.
When I try to install ctags for vim editor, it gives me the following error. error while loading shared libraries: libldap.so.2: cannot open shared object file: No such file or directory
When I look into the /usr/lib folder, the file is naturally missing. I have this file.
When I tried to rename the soft link to libldap.so.2 it gave me a segmentation fault.
Where do I install the packages from ?
View 3 Replies
View Related
Aug 4, 2010
Are there any linux command which lets me to read Iso file byte by byte without mounting?
View 3 Replies
View Related
Jan 28, 2011
I made a modification to the /etc/fstab using Ubuntu 10.04 and now it wont boot correctly. I can get the cli but when I enter /etc/fstab and make an edit it says" changing permission of /etc/fstab: read only file system" This is what I get when the system boots:
PHP Code:
[code]....
so if I choose manual I get to the cli and whenever I attempt to edit the file I get the above error. I used another machine and attempted to mount the drive but I get the same error I added notaime option to my fstab by accident so if I choose manual I get to the cli and whenever I attempt to edit the file I get the above error. I used another machine and attempted to mount the drive but I get the same error. I tried
PHP Code:
[code]...
and I get
PHP Code:
[code]....
How can I mount the partition so that I can edit it?
View 2 Replies
View Related
Feb 26, 2010
I am running Debian (Lenny) as my file server on a Windows network. I have multiple users accessing shared excel worksheets. I am the owner of these files and have no problem but if I save a shared workbook the file properties on the Linux server change ''Groups - Read Only, Others - Read Only''. I can reset them logged in as root but they change back every time I save the file from the XP machine (XP Home SP3). All other non-shared worksheets are fine.
View 1 Replies
View Related
May 26, 2011
I'm storing a list of strings in a file and would like to read the file and pipe each line returned to grep which in turn searches a directory for files containing the string.However this is not returning any output.
View 2 Replies
View Related
