General :: List Of Zsh "fg" Colors?
Jan 24, 2011List of zsh "fg" colors?
View 2 Replies
ADVERTISEMENT
Ubuntu :: Shiki-colors In Xfce - Showing Up In GTK Themes List
May 5, 2010I'm running PC/OS, which is based on Xubuntu. I've got all of the Shiki-Colors GTK themes, the GNOME-Colors icon themes, and the Arc-Colors themes installed. Everything's going great, but I've got one little annoyance going on. What's happening is the Arc-Colors (both the list and non-list version) showing up in my GTK themes list, and that's obviously not where they belong
these, of course, are supposed to be GDM themes. What's more, I see nothing in the /usr/share/themes directory to indicate that they're in there by mistake, and in fact, I distinctly remember putting them in /usr/share/gdm/themes, which is where they belong. I first tried this downloading and installing them from the repos, and when they acted up there, I tried the manual installs from GNOME-Look and got the same thing, too.
Software :: Configure Xterm Colors If Xterm Can Support 256 Colors?
Jul 3, 2009I have a xterm which can have 256 colors. How can I configure the prompt colors and ls output colors to take advantages of the 256 color values?
View 4 Replies View RelatedGeneral :: Bash - Shell Utils: Convert A List Of Hex To List Of Decimals?
Dec 27, 2010How can I convert a file with a lot hex numbers into the decimal?
Example: file1
0x59999
0x5acdc
0xffeff
I want to start $ cat file1 | util | cat >file2 and get file2 with smth like
[Code]...
General :: Get Colors In Terminal?
Mar 8, 2010I am connecting to a remote suse 10.0 machine, and I do not get colors on the terminal, while I get them when I connect to a remote Ubuntu machine.
How can I do to get colors on the suse terminal?
General :: Get Colors In 'less'' Command?
Mar 9, 2010when I read a file in Linux with the command 'less' or 'more', how can I get the content in colors?
View 5 Replies View RelatedGeneral :: List The 'chkconfig --list' In Alphabetical Order?
Jan 7, 2010list the 'chkconfig --list' in alphabetical order
View 3 Replies View RelatedGeneral :: Command To List The List Of Folders / Within The Folder
Jan 28, 2010one command to list the list of folders/ within the folder.
View 4 Replies View RelatedGeneral :: Monitor Colors Too Bright
Oct 13, 2010I installed memory card now monitor colors has been adjused to light blue and white. Tried control panel in personification to chg color but I think the color is off due to ATI graphic card radeon xpress 200.
View 2 Replies View RelatedGeneral :: VNC Viewer Screen Colors Are Off?
Jun 27, 2011I'm running a VNC server along with a local VNC viewer on the same RHEL5 box. The colors for my GUI components look O.K. in the VNC viewer, but a map that the viewer displays is messed up. The color of the map is too blue. My system is using X11 protocol. I'm a newbie when it comes to Linux.
View 2 Replies View RelatedGeneral :: Colors - Apply ICC Profile To Whole Desktop?
Apr 15, 2011I have a monitor with oversaturated red (HP LP2475w). I am able to apply ICC profile to various apps like GIMP and Firefox and Gnome. But I'd like to apply it to everything - because e.g. Flash animations in Firefox are rendered by Flash and don't use ICC. So, can I apply it to whole X?
View 2 Replies View RelatedGeneral :: Linux CLI Through Putty / Do Colors Signify Anything?
Jan 14, 2010When I connect to a RHEL CLI via Putty, some folders are blue, some are highlighted green, etc etc.Does all that signify something? Is there a link to a site that tells me what it all means?
View 9 Replies View RelatedGeneral :: Second Monitor Weird Colors Unbuntu
Sep 16, 2010at first with a single boot system(ubuntu) everything were fine with everything include second monitor ,then i installed vista too,now i have a dual boot system & i am very happy to get rid of crappy junk microsoft's software as much as i can,unbuntu performance is really wonderful to me,just i have one problem,my second monitor show very weird colors ,almost like a negative print,then i boot with vista & there everything are fine with my second monitor,then i guess i don't have any hardware or driver problem,any help or suggestion?I changed my visual setting from extra to non,in case if this problem is because of not enough memory or els,but iy didn't work. my loptop is a vaio vgn,4 gb ram,intel centrino 2- 2.66 ghz-ati radeon graphic card.
View 2 Replies View RelatedGeneral :: ThinIce Theme Colors Configuring?
May 13, 2011I'm trying to change the color of textfield's background in this config:
Code:
# Edit these colors and fonts however you like.
style "default"
{
GtkOptionMenu::indicator_spacing = { 3, 2, 1, 1 }
GtkEntry::progress-border = { 1, 1, 1, 1 }
GtkRange::slider_width = 11
GtkRange::stepper_size = 11
[Code]...
General :: What Do Various Colors In Results Of Bash Ls Signify?
Jan 12, 2011I am at the moment using Ubuntu 10.10 with the default color scheme. If I open a bash terminal and type ls -l / I get the results with most information in white on the standard purple background, most directory names in blue on the normal background, tmp in blue on a green background, a file name in white on the normal background and links in teal on the normal background.
So in this situation I am wanting to figure out what the green background behind tmp signifies. I have searched for information about bash color codes and I find hundreds of links regarding how the CHANGE the colors. I have yet to find one which explains what the colors mean.
General :: Setting Custom LS Colors In Xterm?
Jul 17, 2011I'm having difficulty setting custom ls colors in xterm. If I understand it right one can edit the system-wide file located in /etc/DIR_COLORS to modify every terminal or customize xterm; I chose xterm mostly because the other terminals I never use. Here is my .bash_profile and .bashrc respectively:
if [ -f ~/.bashrc ]; then
source ~/.bashrc
fi
if [ -f /etc/bashrc ]; then
source /etc/bashrc
fi
alias ls='ls --color -F'
PS1='[e[1;32m][u@h:w]$[e[0m] '
When I use the login shell, the colors are different than xterm in that they are not as bright; furthermore, I marked out bold fonts in .Xresources:
!xterm colors
xterm*foreground: #d3d3d3
xterm*background: #000000
xterm*boldColors: false
xterm*cursorBlink: true
xterm*cursorColor: white
xterm*loginShell: false
xterm*faceName: Liberation Mono
xterm*faceSize: 10
So, there must be a file around somewhere that is changing the colors between the interactive and login shells. Also,
man xterm:
color6 (class Color6)
color7 (class Color7)
These specify the colors for the ISO-6429 extension. The defaults are, respectively, black, red3, green3, yellow3, a customizable dark blue, magenta3, cyan3 and gray90. The default shades of color are chosen to allow the colors 8-15 to be used as brighter versions. How does that get anyone anywhere with setting the color? It doesn't say what color (class) is assigned to which file specifically, thus adhering to the distribution-wide color codes. Perhaps I am making this more difficult than it should be.
General :: Bash Watch Command With Colors Preserved?
Mar 29, 2010From man watch: Non-printing characters are stripped from program output. Use "cat -v" as part of the command pipeline if you want to see them. So how do I use cat -v if I want to see the colored output from:watch ls -al --color
View 3 Replies View RelatedGeneral :: Get Putty To Support 256 Colors In Emacs On CentOS?
Jan 21, 2011As far as I can tell from browsing around, I should be getting 256 colors in my Emacs, but I'm not. I'm running CentOS 5.4 on an ec2 instance. I'm running Putty 0.60 on Windows 7. Putty is set to send xterm-256color for its terminal string. Putty is set to allow 256 colors. On CentOS, my $TERM is set to xterm-256color.
tput colors shows 256. I recompiled Emacs to 23.2, making sure to install libtermcap-devel beforehand, because someone claimed they needed that. But still, when I M-x list-colors-display in Emacs, it only shows 8 colors.
General :: Wrong Monitor Resolution Set And Now Screen With Many Colors
Jul 25, 2010I am new to Linux (Ubuntu 10.4 LTS on a Thinkpad T40), now just two days, and had everything working nicely. But since I wanted a better higher resolution I tried to set the monitor resolution to a higher value. After selecting a higher resolution first the screen went black and now it has a white background and is steady but has flickering areas. The system is still working. How can I go back to the resolution that was working?
View 2 Replies View RelatedGeneral :: Redefine The Way ANSI Colors Are Shown In A Terminal Emulator?
Jun 8, 2011I'd like to redefine the actual colors that ANSI escape sequences show, i.e. I'd like to personalize what "light red" means and render it as, say, orange. Is there any terminal emulator that works under linux that allows me to do this? how?
View 1 Replies View RelatedGeneral :: Evolution Task List Reminder (sync With Phone And Online Task List)
May 19, 2011I have my task list in evolution (mainly so it can sync with my phone and online task list) but I always forget to look at the task list. Is there an application or plugin which periodically displays the contents of the tasklist or even better, it briefly displays the most urgent/important tasks when I login? Or anything else which automatically displays the most important tasks. Currently I have to open the task list and look at them (which I usually forget). I do not mean some kind of alarm when the task is due but more a daily reminder of what to do.
View 3 Replies View RelatedGeneral :: KMail's Message List - Change Message List Display?
Jul 20, 2009KMail 1.11.4, KDE 4.2.4: I'm migrating from WinXP to Mandriva, and installed KMail at the weekend. Works fine, but I have a niggle - the message list displays headers grouped by month order. I'd like the option of having a simple list (no groups), and suspect that it could be done - but I haven't been able to find out how. I've checked in the Handbook without success, and a search in LQ hasn't turned up anything yet.Any suggestions gratefully received. If this isn't the right place for a KMail query,
View 1 Replies View RelatedUbuntu Installation :: E - Type 'usage:' Is Not Known On Line 54 In Source List /etc/apt/sources.list
Jan 23, 2010Ive seen some fixes for this but they all seem to be specific to the particular user's sources.list . . . ..
Code:
Here is Line 54
Code:
Ubuntu Installation :: E: Type Sudo Is Not Known On Line 55 In Source List /etc/apt/sources.list
Mar 12, 2010I tried to change the basic toolbar to cairo dock,a tutorial that i found told me to write in terminal gksu gedit /etc/apt/sources.list.d/winehq.listso i write it and a window opened,i couled not find the text that told me(the tutorial i mean)so i closed the window,after that i keep taiking the same error
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
E: The list of sources could not be read.
Go to the repository dialogue to correct the problem.
E: _cache->open() failed, please report.
now whene i got in the winehq.list the text has gone and i take this error in update manager,my software center doesn't work and my terminal whenever i type sudo commands says
E: Type �sudo� is not known on line 55 in source list /etc/apt/sources.list
Ubuntu :: E - Malformed Line 57 In Source List /etc/apt/sources.list - Dist Parse
Jun 25, 2010I get this error message: E: Malformed line 57 in source list /etc/apt/sources.list (dist parse)
I am pretty new to Ubuntu and dont really understand computer
Here is the sources list (??) as well
Ubuntu :: Error: E: Type 'sudo' Is Not Known On Line 52 In Source List /etc/apt/sources.list
May 4, 2011don't know much, but when I tried to update I get this error:
E: Type 'sudo' is not known on line 52 in source list /etc/apt/sources.list E: The list of sources could not be read.
Ubuntu :: Clean Up Bootloader Menu List - Remove Ones Don't Want To Show On List
Jun 17, 2010All I want is for my bootloader to show "Ubuntu" & "Windows XP" which are the only 2 OS's I have installed (dual booting). At the moment it shows Windows XP, Ubuntu, Ubuntu recovery mode & like 2 more.. which are also Ubuntu & recovery mode. I've never selected the other Ubuntu ones, only the first one. So, how can I remove the ones I don't want to show on the list.
View 2 Replies View RelatedProgramming :: List 4 Names From Users List And Output Them To Fbusers In Numbered Ascending Order?
Feb 2, 2010How would I list 4 users ID numbered 10, 11, 12 and 13 from my users list and output them to a file busers where their names are numbered by ascending order? How would I accomplish that on a one line command?
View 4 Replies View RelatedUbuntu :: Malformed Line 59 In Source List Etc/apt/sources.list?
Sep 1, 2011There is a problem with my source list (apparently) I'm running 11.04 if that helps.When I try to use apt-get install update for example, I get: "Malformed line 59 in source list etc/apt/sources.list"The same error occurs when trying to access synaptic package manager, it tells me there is a malformed line and the list of sources cannot be read.This error prevents me from apt-getting anything, updating and i suspect it is affecting the software center too.
View 6 Replies View RelatedProgramming :: Downloading A List Of Files From A Remote Server Using A List?
Feb 10, 2009I am trying to get this script to work. The purpose is to download a list of modules from the slax.org the list consist of a list of module numbers. What I am trying to do is Download the file or the file name corresponding to the number in the list.the list is comma delimited. this is what I have done so far and I am a stand still.
#!/bin/sh
# Wget script to retrieve modules from slax.org modules
#
# ----Begin of user defined values -----
# Path to wget
[code].....