General :: Finding All Attached Child Processes
Nov 17, 2010
I want to check all the child processes attached to a specific process. Say for a example; my process is a java process. Then I wanna know what are the processes attached to that java process. At the moment I use the command # ps aux|grep java; this gives the details about the currently running java process. So I can kill the whole java process using #kill -9 {pid} ...but there are sub processes attached (I guess child processes) to java process. I wanna view all of them & kill whatever the process I like not the whole thing. I'm using Red hat 5 enterprise edition. and currently a weblogic application server is running on that.
View 2 Replies
ADVERTISEMENT
Aug 25, 2010
I have a situation where I have several screen (/usr/bin/screen) sessions running. 2 of the screen sessions (ps1 and ps2) run a script that launched SipP with specific parameters. 1 script starts SipP and has it make 50 calls where the other makes only 20 calls. However The script is configured where we can change how many calls it makes if needed.
So the problem is, due to issues with SipP, we must restart everything every 12 hours (at maximum). So I am trying to work out scripts to stop the SipP processes cleanly. In order to do so I need to figure out which SipP process is spawned by which screen. i.e. which sipp was started by screen session ps1, and which one was started by screen session ps2.
Now I can do ps -ef | grep <number of calls configured> to find out but then I would have to change my stop script every time we reconfigure how many calls are made, and have a separate stop script for each screen session. I would much rather be able to send the screen name as a parameter to the stop script and have it work no matter how many calls SipP is configured to make.Also your standard kill -1 <PID> does not shutdown SipP cleanly. So working out those details is a bit more tricky. Anyone know how I can determine what processes are spawned from a specific screen session?
View 2 Replies
View Related
Sep 6, 2010
I work on Linux for ARM processor for cable modem. There is a tool that I have written (as the job demands) that sends/storms customized UDP packets using raw sockets. I form the packet from scratch so that we have the flexibility to play with different options. This tool is mainly for stress testing routers.I actually have multiple interfaces created. Each interface will obtain IP addresses using DHCP. This is done in order to make the modem behave as virtual customer premises equipment (vcpe).
When the system comes up, I start those processes that are asked to. Every process that I start will continuously send packets. So process 0 will send packets using interface 0 and so on. Each of these processes that send packets would allow configuration (change in UDP parameters and other options at run time). Thats the reason I decide to have separate processes. I start these processes using fork and excec from the provisioning processes of the modem. The problem now is that each process takes up a lot of memory. Starting just 3 such processes, causes the system to crash and reboot.
I have tried the following:-
1-I have always assumed that pushing more code to the Shared Libraries will. when I tried moving many functions into shared library and keeping minimum code in the processes, it made no difference to my surprise.
2-I also removed all arrays and made them use the heap. However it made no difference. This maybe because the processes runs continuously and it makes no difference if it is stack or heap?
3-I suspect the process from I where I call the fork is huge and that is the reason for the processes that I make result being huge. I am not sure how else I could go about. say process A is huge -> I start process B by forking and excec. B inherits A's memory area. So now I do this -> A starts C which inturn starts B will also not help as C still inherits A?. I used vfork as an alternative which did not help either. I do wonder why.
View 1 Replies
View Related
Jul 22, 2010
I am facing an issue where the process starts hanging. When I closely look at the logs I come to know that some of the child processes that are forked by the parent process are not finished.
1) Is it possible that the child processes that are not finished occupy the socket memory of the parent process and ultimately a point is reached where no socket memory is available to fork new child processes.
2) What is the standard limit of socket memory in linux?
3) What is the fate of such child processes (as I have mentioned above)?
4) How to debug such cases so that the exact problematic area is identified?
View 2 Replies
View Related
Feb 15, 2011
well i have just started with shell scripting...how to find all child processes of a parent process given to script as argument.
View 10 Replies
View Related
Sep 6, 2010
I work on Linux for ARM processor for cable modem. There is a tool that I have written (as the job demands) that sends/storms customized UDP packets using raw sockets. I form the packet from scratch so that we have the flexibility to play with different options. This tool is mainly for stress testing routers.
The details are here.
I actually have multiple interfaces created. Each interface will obtain IP addresses using DHCP. This is done in order to make the modem behave as virtual customer premises equipment (vcpe).
When the system comes up, I start those processes that are asked to. Every process that I start will continuously send packets. So process 0 will send packets using interface 0 and so on. Each of these processes that send packets would allow configuration (change in UDP parameters and other options at run time). Thats the reason I decide to have separate processes.
I start these processes using fork and excec from the provisioning processes of the modem.
The problem now is that each process takes up a lot of memory. Starting just 3 such processes, causes the system to crash and reboot.
I have tried the following:- 1-I have always assumed that pushing more code to the Shared Libraries will help. So when I tried moving many functions into shared library and keeping minimum code in the processes, it made no difference to my surprise.
2-I also removed all arrays and made them use the heap. However it made no difference. This maybe because the processes runs continuously and it makes no difference if it is stack or heap?
3-I suspect the process from I where I call the fork is huge and that is the reason for the processes that I make result being huge. I am not sure how else I could go about. say process A is huge -> I start process B by forking and excec. B inherits A's memory area. So now I do this -> A starts C which inturn starts B will also not help as C still inherits A?. I used vfork as an alternative which did not help either. I do wonder why.
reduce the memory used by each independent child processes.
View 1 Replies
View Related
Oct 14, 2010
the wrong part of the forum but basically im working on a project and getting no where what so ever and i was wondering if i could get your help. Basically i have to create two scripts do:
The parent script which is going to:
o spawn several child processes.
o keep track of the progress of the child processes.
[code]...
View 1 Replies
View Related
Oct 13, 2010
If a process forks its child and communicate with the child using pipe, do closing the write end of the pipe and terminating the writing process have the same effect?
View 3 Replies
View Related
Aug 22, 2011
All of a sudden, my computer feels sluggish. Mouse moves but windows take ages to open, etc. uptime says the load is 7.69 and raising. What is the fastest way to find out which process(es) are the cause of the load? Now, "top" and similar tools isn't the answer because they either show CPU or memory usage but not both at the same time. What I need is the single command which I might be able to type as it happens - something that will figure out any of: "System is trying to swap 8GB of RAM to disk because process X ..." or "process X seeks all over the disk" or "process X uses 400% CPU"
So what I'm looking for is iostat, htop/atop and similar tools run into one with an output like this:
1235 cp - Disk trashing
87 chrome - Uses 2GB of RAM
137 nfs_bench - Uses 95% of the network bandwidth
I don't want a tool that gives me some numbers which I can analyze but a tool that tells me exactly which process causes the current load. Assume that the user in front of the keyboard barely knows how to write "process" but is quickly overwhelmed when it comes to "resident size", "virtual memory" or "process life cycle".
My argument goes like this: User notices problem. There can be thousands of reasons ... well, almost. User wants to know source of problem. The current solutions give me lots of numbers and I need to know what these numbers mean. What I'm looking for is a meta tool. 99% of the data is irrelevant to the problem. So what the tool should do is look for processes which hog some resource and list only those along with "this process needs a lot of CPU, this produces many IRQs, this process allocates a lot of RAM (and it's still growing)".
This will be a relatively short list. It will be much more simple for an newbie to locate the culprit from this list than from the output of, say, htop which gives me about 5000 numbers but requires me to fold multi-threaded processes myself (I have 50 lines which say VIRT 2750M but only 16GB of RAM - the machine ought to swap itself to death but of course, this is a misinterpretation of the data that can happen quickly).
View 5 Replies
View Related
May 26, 2010
I'm in the process of writing a program that is a server- it will accept connections and stuff, and spawn a child process for each. However, i've run into a small problem. I do NOT want to bother with keeping track of the processes unless i need to. So, i set SA_NOCLDWAIT (#ifdef) on a SIG_IGN to the SIGCHLD handler through sigaction interface. The standard says that it the kernel will then keep track of reaping zombie processes for me (a HUGE plus). However, upon receiving a SIGINT signal, i want to stop the server from accepting new connections (done), and then wait for there to be no new connections. I was thinking of just putting a loop like so:
Code:
while((wait(NULL) != (pid_t)-1) && errno != ECHILD);
However, I'm not *sure* that this will work, especially with SIGCHLD still ignored. So how can i tell if there are still child processes? I can't find any call like int getnumchld(pid_t proc); (i wish). Plus it would be inefficient to spin on that function anyway. OTOH, i would rather *NOT* have to do the same thing in a loop with a system("ps |...>file"); read(file); etc. either. Is there a way i can portably implement this feature (I was hoping i could run it on linux and the major BSDs, at least).
TO SUM IT UP:
How can i tell if a process has no child processes if i've SIG_IGN'd SA_NOCLDWAIT'd the SIGCHLD? Is there a _reasonably_ portable way to do so? I *don't* want to manually wait for EVERY process. Maybe only those still active at the time of SIGTERM, but that requires keeping track of the number of connections and whether those have terminated...
EDIT: Does anyone know if the above code *would* work, even with SIGCHLD ignored and the kernel cleaning up zombies *for* me? I checked the manpage and it doesn't say much.
EDIT1: Note that all of the processes are in the same process group and session. SO i can find them through this as well. Perhaps even setting the uid/gid and finding all processes run by that group?
EDIT2: i have an idea if the above isn't feasible. If there is no "elegant" way to do it, i could reduce the complexity by sending a SIGUSR1 to the whole process group. Each process would then set a flag telling it to send a SIGUSR1 in reply and send a SIGUSR2 when it is done executing. Then i could keep a count of signals. Maybe that would be *easier*. Or perhaps a count of all child processes and just a termination signal to decrement the counter.
View 2 Replies
View Related
Sep 3, 2010
I'm looking for a way in Perl to be able to take a list of servers, ssh multiple commands to it and store the results. If I do this process serially, sometimes one server will hang the whole script and if it doesn't, it still takes hours to complete.
I'm thinking what I need to do is make a parent loop that calls out a separate process that passes the server name to the child sub process and then executes all the commands I have defined in its own process. If one server 'hangs', at least that won't stop the script from doing all the other servers in the list.
I'm guessing using the fork() command would serve me best, however, all the online descriptions I have found have been vague at best.
View 4 Replies
View Related
Jul 20, 2010
Im wondering if there is a simple way to protect environment variables to be changed by child processes?
View 1 Replies
View Related
Dec 16, 2009
I thought 'killall' would work, but I need to provide the "command" to kill. I'm really looking for a command that will kill all processes that have a particular file/directory open. Currently, my script fails on an 'umount' because there are several processes that have this filesystem open. The command 'lsof' is a good tool to determine which processes have a filesystem open, but I don't really want to write a script that parses through the 'lsof' output to capture PSIDs. Is there a linux command that can kill all processes that may have a particular filesystem open?
View 2 Replies
View Related
Apr 11, 2011
I have written a simple script which has to find required patterns from a bunch of files ( where each file is around 2 GB each,which contain the output of seq 1 10000000000000) on an 8 core machine.I am current forking 6 child processes which run simultaneously on 6 cores of the processor & have to search for the required pattern in 6 different files & inform the parent process when a pattern is found using a PIPE.
The problem is,when a child process is done reading a text file looking for a pattern,it is becoming a zombie process.It exits cleanly when i put a $SIG{CHLD} = "IGNORE"; in the script.Can any one tell me whats going on & how do i improve the communication between child and parent processes?
Code:
#!/bin/perl
use strict;
[code]...
View 3 Replies
View Related
Jul 30, 2009
I am troubleshooting something and I got this problem.
If I do "pstree -p"
It shows,
Code:
[code]....
However, it does NOT show up in "ps -elf"
Code:
ps -elf | grep soffi
0 S whho 7734 1 0 80 0 - 36435 - 11:14 pts/2 00:00:03 /usr/lib/openoffice/program/soffice.bin -splash-pipe=5
0 S whho 7833 7759 0 80 0 - 751 - 11:21 pts/3 00:00:00 grep soffi
I was wondering if 7735, 7736, 7737, 7743 were really processes. Then I checked /proc, I could cd to /proc/7735, /proc/7736, etc, but I could not ls them out. I looked at the man page of "pstree", it says,
Code:
Child threads of a process are found under the parent process and are shown with the process name in curly braces, e.g.
icecast2---13*[{icecast2}]
So, what does all this mean? Does it mean that 7735, 7736, 7737, 7743 are just threads but not processes? If so, why could I cd to /proc/<id> but not see them in "ps -elf".
View 10 Replies
View Related
Oct 27, 2010
I have a desklet that, occasionally after toying with network stuff, will tell me that large amounts of data are being sent/received. What's a good way to determine what processes are occupying these resources?!
View 14 Replies
View Related
May 23, 2011
I have a doubt about signals in C programming. I have done this little program to explain it. It creates a child process with fork and, when the child ends, receives the SIGCHLD signal and wait for its termination.Ok, quite easy, BUT when I execute this code the SIGCHLD signal is received twice, first as an error (returns -1) and the second one to finish the child process.I don't understand the meaning of the first received signal. Why is it generated? Is the code wrong? (if you add the SIGINT and press Ctrl+C during the execution it also receives two signals instead of one)
Code: #include <stdio.h>
#include <unistd.h>
#include <string.h>
[code]....
View 4 Replies
View Related
Dec 7, 2009
Consider the following code:
Code:
int main()
{
int i=0;
pid_t pid;
for(i=0;i<2;i++)
[code]....
I get the following output:
Parent: chid_pid=4356 i=0 parent's pid=4355
This is child 4356 i=0
This is child 4357 i=1
[code]....
I can observe instead of two children(as I expect) processes there are three. This is because child process 4356 creates its own child. Why all the messages of the type "This is child X i=Y" are concentrated one under another? How exactly fork works? Is affected by the fact that I have a dual-core processor?
View 3 Replies
View Related
Feb 15, 2011
I'm trying to write a script that uses the 'du' command to make essentially a text-based filelight type program. It should scan the current directory for the file's sizes and display them in order largest to smallest (or vice versa). The user should be able to go throughout the file tree and see child directories scanned for the sizes as they're accessed. I just need to know one more thing- how can I restrict the displayed results to the current working directory? would a grep for the output of pwd suffice? just getting some thoughts before i try and possibly dig myself a hole.
View 1 Replies
View Related
Feb 4, 2010
I have following script.
Code:
#!/bin/bash
export VAR="shell"
echo " $VAR in parent "
bash
echo "shell in child "
If i execute this script, the output is just
Code:
shell in parent
Why can't I see the output shell in child ?
View 2 Replies
View Related
Dec 17, 2010
What happens to a child process that dies and has no parent process to wait for it and what's bad about this?
View 2 Replies
View Related
Jul 27, 2011
In my program, I fork() to get a child process. Because of some problem, child process terminates by a segmentation fault. Parent process is still running. I have compiled my code with -g option. I have done: ulimit -c unlimited. I am not getting core dump of the child process. How can I get the core dump of child process?
View 1 Replies
View Related
May 20, 2011
I have created three child process from one parent. And different child has different functions. Child 2 has got function to load file called "wc" to count file1 and and its required to get their files by command line arguments. I can get the files through command line but couldn't get the files when child 2 process start.
View 9 Replies
View Related
Feb 15, 2011
I successfuly installed CentOS to my Dell laptop using CentOS_5.5_Live_DVD.iso and mounting it to a USB flash drive with iso2usb.exe, Now my laptop will Not load CentOS when I remove the USB flash drive, I get a messege saying "no system found".
View 5 Replies
View Related
Apr 21, 2010
Recently I have renovated an old computer which once belonged to my dad (the old HDD crashed, and I just bought a new one to replace it). My parents want me to fix this computer for my 5-year-old sister to use. I decided to use Linux Mint as the OS because everything (flash, mp3, etc.) is already configured.
How do I create a user account in Linux Mint with limited access for my sister, so that it won't mess up the entire system?
All she does is surf the web, so I'm just worried that she might accidentally mess up a system setting that I eventually will have to fix it.
View 2 Replies
View Related
Apr 26, 2011
I have setgid permission on my home directory (/home/XXXX) the permission look like below.
Code:
drwxrws--- 2 toshi jadu 4096 Apr 26 16:54 getset
If I create new directory in this getset folder the permission of getset folder could not inherit.
Code:
#cd getset
#mkdir test2
#ls |grep test2
drwxr-s--- 2 toshi jadu 4096 Apr 26 16:56 test2
As I know the setgid utility allow to inherit the permission from parent directory to child directory.
View 4 Replies
View Related
Apr 21, 2011
I have a script that calls other scripts/commands which may or may not spawn other process. From my understanding, when I do a ps -ef, the highest numbered process ID is supposed to be the parent ID of all the other related child processes, is this correct? In most or all circumstances, I do a ps -ef | grep <processid> of my script and anything that spawns off that process IDs I assumed are the child processes of my script. If I want to terminate my script and all other child processes, then I kill the parent ID which is the highest numbered PID and this will subsequently kill all other child process IDs, is this correct?
Now, my question is whether there is any quick way of showing what are the child processes of a parent ID instead of what am currently doing now which is visually checking which one is the parent ID and "assuming" that the highest numbered PID is the parent ID of all the other processes. Below is a sample output of running ps -ef | grep exp | grep -v grep. I assume from the output below that the parent process/ID is PID 11322, is that correct?
Code:
oracle 11154 11153 0 21:20 ? 00:00:00 /bin/sh -c (. ~oracle/.profile; /bin/ksh /usr/local/oracle/scripts/expdp_o
oracle 11155 11154 0 21:20 ? 00:00:00 /bin/sh -c (. ~oracle/.profile; /bin/ksh /usr/local/oracle/scripts/expdp_o
oracle 11190 11155 0 21:20 ? 00:00:00 /bin/ksh /usr/local/oracle/scripts/expdp_schema.ksh dev01
oracle 11322 11190 0 21:20 ? 00:00:00 expdp
View 2 Replies
View Related
Aug 27, 2010
Iv got an assignment to complete and I'm stuck at the basic level.
A part of the assigned problem is :
The main process will read the file, and will create N number of child processes (Where N is taken as input) as early as possible before all the children starts its execution. Before creation of each child, the main process should read the file to store all the required data in then corresponding data structure. Child processes should not read the file for getting their information.
As far as my knowledge about this , the child executes before the parent. How do I make the parent not pass the control to it's children before it finishes creating all the children?
View 3 Replies
View Related
Aug 26, 2009
I wonder how one can, if at all, run an X program in the background *in an emulator sub-shell process*. What I mean is to launch a program in an emulator, e.g, by xterm -e gedit
but with gedit (in this example) running in the background from inside the xterm sub-process, so that the xterm will accept other commands. In the above, gedit will run in the foreground, and of course, if you do
xterm -e gedit &
then xterm will run in the background, not gedit.In short, I would like to achieve the same thing as "gedit &" as you manually do in xterm, but from another shell. What I aim to do is write an X init script to achieve this result (to have the emulator open and a program or two running from it, in the background, at the X startup).
View 2 Replies
View Related
Nov 2, 2010
I'm studying about signal in Linux Kernel and I got a problem about signal handler and output buffer.
I just want to know about stdout buffer related parent process and child process.
The problem is - parent process received SIGINT signal_handler that I implement is called. And after signal_handler is called, it print string "pid : xxx state : RUNNING" ... but after end of signal_handler function, child process might be print string but it isn't print at all.
I'm not asking right code, but I want to know why is this happened and concepts about signal handler, buffer - between parent process and child process.
here is a code signal_handler:
Quote:
void TC3_handler()
{
pid_t pid;
ProcState ps;
pid = GetProcessId();
[Code]....
chlid process counts number in infinite loop, but after call signal_handler, it can't print at all.. just waiting for SIGINT..
View 2 Replies
View Related
