General :: ERROR - Unable To Locate IOAPIC For GSI
Nov 16, 2010As the system boots up, these messages show up:
View 2 RepliesAs the system boots up, these messages show up:
View 2 RepliesAfter installing Fedora 14, following error messages appear at boot:
Code:
I installed a command line version of Ubuntu 10.10 using the alternate install disk. To suit my needs, I have to install the gcc C compiler in this environment. When connected under root, I enter the command: 'apt-get install gcc'. The error 'E: unable to locate package gcc' is then displayed on screen. how to install gcc? Is this package available from the alternate install disk or do we have to download it. If I dowbload a tar file, where should I copy it to to be able to have the install application see it?
View 2 Replies View RelatedI have installed the latest server (Ubuntu 10.04). When I tried (including sudo apt-get update first followed by sudo apt-get install virtinst) I get Unable to locate the package virtinst. It also did it for a few others as well. The apt-get update command is successful (on the console it says it is Done). I have network connection (no proxy) and I am able to ping other systems at home and outside world. So I don't believe it is network issue.
View 1 Replies View Relatedi am new to ubunto. i am trying to install some tools when i add the following command :
[Code]...
I tried to install vnc4server on my new ubuntu 11.04 but its fauling and here is the error log sunandi@sunandi-MM061:~/Downloads/linux-2.6.39.1$ sudo apt-get install vnc4server
[code]....
New to Ubuntu not to Unix. I am having issues with aptitude updates. Gives error unable to locate. When I look for the file manually I cannot find it either. It is looking for http://us.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US. Is there a site that list all mirrors that carry the updates? I would like to find manually and adjust source.list file.
View 6 Replies View RelatedI am using Fedora on a system i just installed it on, i just got a new HP monitor and hooked it up, now it won't work. I keep getting AN ERROR: unable to locate 10APIC for GSI 6,13,8,12,1......WHEN THE SYSTEM BOOTS UP.
View 1 Replies View RelatedCode:
nnjond@nnjond-den:/$ cd /media/disk/Dual_Data/
nnjond@nnjond-den:/media/disk/Dual_Data$ ls
07_Magna_DOWNLOADS 21_TEMPS Peleas.htm
08_Self-Improvement 22_Desktop Pelleas.odt
[code]....
I am trying to install Photorec / testdisk I am entering this in terminal sudo apt-get install testdisk sudo apt-get install photorec For all these i am getting a message, "E: Unable to locate package testdisk" and similar message for Photorec. I tried this even for Foremost but i am getting same message. how do i get to open and work on these packages?
View 4 Replies View RelatedI am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies View RelatedI am executing command "yum install perl-CPAN". I got the following error "Can't locate CPAN.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .).". Let me give you some details of the problem.
OS: CentOS release 5.4 (Final)
Architecture: : 32 Bit
Installed Perl Version: This is perl, v5.8.8 built for i386-linux-thread-multi
I've also studies previous posts on this topic which says "yum install perl-CPAN" will fix the problem when I execute this command I got "No package perl-CPAN available".
I did check the manpath and the files located there.just seems that some pages are missing.
View 8 Replies View RelatedI was trying to install vmware player 3.0 and it prompt that it require the kernel kernel-2.6.35.6-45.fc14.i686 to be compile before it start.
Quote:
Kernel headers for version 2.6.35.6-45.fc14.i686 were not found. If you
I try following but unable to find.
Code:
Nothing to do
Code:
Code:
Then I try to map to the file, but not working.
I have downloaded and installed a new theme before in my fedora machine.However, I got this warning when I load gvim, nautilus every time.(gvim:4629): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",(gvim:4629): Gtk-WARNING **: Unable to locate theme engine in module_path: "equinox",
View 1 Replies View RelatedI type in root, it says root is not currently installed and tells me what to type in to install it; I type that in and I get the error message "Unable to locate package root-system-bin"... I'm using Ubuntu 10.10 and I just installed it onto an older HP laptop...
View 11 Replies View RelatedI m Using 4.0.0-kali1-amd64 in VMplayer Debian - 64bit my internet works fine with wired and wirless as well i tried to install wcid package and that show me error see below :
I m facing some problem
apt-get install wcid-gtk
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package wcid-gtk
2nd thing is blueooth is enable but not works hcitool scan or btscanner
I'm trying to install Ruby on Rails on an Ubuntu desktop VM. The network connection works ok but I can't seem to get this to work:
sudo apt-get install ruby1.9.2
I want the latest version of Ruby.
Is this because I haven't enabled some repository or something - I dimly recall having to 'enable universe' before now... but can't remember why or how....
Installing Debian Testing on a new laptop and wanted to test out KDE4 on this laptop.Somehow I am not able to locate the networkmanager for KDE4 or maybe I missed something?
View 3 Replies View RelatedCannot install updates. Click on icon which says 65 updates available but update manager opens and is blank and frozen .Reboot and same results. apt-get install updates says Unable to locate package updates. Everything has worked perfectly upto now I am running Squeeze.
View 4 Replies View RelatedI just changed (not upgraded, I made a clean install on a new hard drive) from 9.10 to 10.10 and I have a serious problem. I just can't install new packages. Neither apt-get nor synaptic can find any package. I either get a "E: Unable to locate package <package_name>", or "E: Package <package_name> has no installation candidate" For example when I type sudo apt-get install emacs23 , I get this output: Quote:
Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package emacs23 And the synaptics package manager only lists the packages I already have. I searched these forums and googled my error message, but I couldn' t find anything helpful. The only thing I know is that this is not a network/proxy problem, I am behind a proxy but I have set the http/https/ftp_proxy environment variables, and I have a working network connection, as I am actually posting from the same computer.
I'm trying to install Covergloobus but it says it's not able to find it. It gives me this:
Code:
adrian@adrian-desktop:~$ sudo apt-get install covergloobus
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package covergloobus
i'm tried to install cacti on ubuntu, but when i enter the Quote:
sudo apt-get install cacti
command. the result is E: Unable to locate package.
and i tried in System>administrstion>synaptic package manager. i tried to reload the result is error..
and it's not just for cacti, i've tried to install the other program the result still the same..
To start, I am a very new user of ubuntu, so please bear with me. I just installed ubuntu on an old desktop and cannot get it to install packages. I installed these same packages on my laptop that is a little newer and it works on the laptop, but it wont work on the desktop. I searched for previous threads and found to try
Code:
I also tried this many times and nothing has changed
Code:
when ever I use the terminal to install a program (for example Ubuntu-tweak) I end up with this line E: Unable to locate package (then the program name),this has also happened when I've updated through the terminal. (I've since installed Ubuntu-tweak via the link on its site).Let me say this my little box has a banging Internet connection. And I have a full almost brand new installation maverick meerkat.
View 2 Replies View RelatedI just reinstalled Xubuntu 11.04, and I'd like to install fluxbox:
Code:
09061920@system:~$ sudo apt-get install fluxbox
[sudo] password for 09061920:
Reading package lists... Done
Building dependency tree
[Code].....
in /etc/apt/sources.list, but I'm on a very slow connection so I don't want to update 42 MB right now (trust me when I say I'm on a very slow connection ).
how to update just the updates necessary for apt-get without having to update the 42 MB of, for the moment, pointless updates?
I'm running Ubuntu 10.10 and trying to install CUDA. Everything is working fine except it looks like some openGL components are missing; when compiling the CUDA code samples I get the error
/usr/bin/ld: cannot find -lGL I went online and it looked like 'sudo apt-get install nvidia-glx-new'
would take care of this but then I get the error from the title of this post, that it can't be found. I'm afraid I'm a poor hand at installing components with Linux .
S
I have the ndiswrapper util installed on my computer, however, I have been unable to install the corresponding driver from the provided cd. I have a WNA 1100 wireless adapter. I have not been able to locate a mountable .inf file on the cd. Only a "setupt.exe" or a trans.tbl file.
View 2 Replies View RelatedI'm able to connect to the internet wirelessly with my laptop running kubuntu 10.04 with no additional packages installed. I'm able to setup my connection using the GUI but I'm unable to locate where the configs are stored on the computer.
I thought the configs were stored in /etc/interface but the file never changes. Even after I'm connected, all it shows is
I'm using wpa2 with my wireless router.
The reason I need this is because I'm planning on installing ubuntu server edition and there's no GUI for wireless setup.
Just installed Ubuntu Server (Natty) and tried:
Code:
sudo apt-get install apt-proxy
But I only got:
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package apt-proxy