General :: Determine Socket From /proc/cpuinfo?
Jan 13, 2010
Is there a simple way to determine the CPU socket from the output of /proc/cpuinfo. Determining the type of processor is simple enough, but the processor I have (Celeron) has two different possible sockets. The output of /proc/cpuinfo is:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
[Code]...
I've looked on the Intel processor finder web site with appropriate filters, but the stepping values do not appear to match anything.
View 1 Replies
ADVERTISEMENT
Jul 18, 2011
My CPU has 2 cores, so I can see two parts in /proc/cpuinfo.But, I want to know if CPUs that support Hyper-Threading (or similar tech), will /proc/cpuinfo give CPU info per core or per thread (or call it sibling)?I only know that Windows Task Manager will give CPU usage statistics per thread if the CPU supports HT.
View 2 Replies
View Related
Feb 26, 2011
I have following in cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
[code]....
View 2 Replies
View Related
Sep 2, 2011
There is a computer with two "Xeon(R) CPU X5550 @ 2.67GHz" CPU. The Hyper-threading is enabled, so it looks like 16-core system, but really there is only 8 physical cores.
I know that when hyperthreading is enabled, each physical core is splitted into two virtual cores. I want to know, which pair of virtual cores shares a physical core and which are not. Or, how (in what order) will Linux enumerate HT-cores comparing to real cores. (enumerating is done for sched_setaffinity and taskset masks).
I have a dump of /proc/cpuinfo file from the system.
I think there are possible:
CPU0-CPU7 are not sharing phys. core. CPU8-CPU15 too. But sharing is in pairs CPU0+CPU8, CPU(i)+CPU(i+8) and so on. or CPU0+CPU1 are from single physical, CPU2+CPU3, CPU(2*i)+CPU(2*i+1). or exotic CPU0+CPU15 sharing, CPU1+CPU14 ... or random?
The hard moment in this case is that there are 2 physical dies of CPU (two sockets), and usual recommendation of using "physical id:" field can't help
The cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU X5550 @ 2.67GHz
[Code].....
View 1 Replies
View Related
May 13, 2011
I have fedora 14 installed and wish to use/learn kvm. I installed via groupinstall the virtualization group. I see vmx in /proc/cpuinfo. but when I start virt-manager I get a message that kvm is not installed or cannot be leaded into the kernel (to make a long message short). I am at a loss here as to what to do. I run cat /proc/modules and see "kvm 257420 0 - Live 0xffffffffa022a000". also after running modprobe kvm I run [root@fed14 ~]# lsmod | grep -i kvmkvm 257420 0 and see kvm there.
View 3 Replies
View Related
Feb 17, 2010
I recently built a new computer. For CPU, I am using AMD Athlon II X2 @ 2.8GHz... However, when I do cat /proc/cpuinfo, I get the following:
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II X2 240 Processor
stepping : 2
cpu MHz : 800.000
cache size : 1024 KB
and same thing for processor: 1 Notice that for cpu MHz, it says 800.000. However, that is not correct... Shouldn't it say 2800? Is this a bug? Am I looking at this wrong?
View 2 Replies
View Related
Oct 1, 2010
I'm trying to retrieve a single string or value from /proc/cpuinfo, but when I try to extract the model (not the model name) the model name comes with it, also it likes to print it twice...
Code:
model="`cat /proc/cpuinfo | grep model | cut -d: -f2 | cut -c1-3`"
echo $model
All i want this to do is spit out the model number once. (I need to pass it to another script)
View 14 Replies
View Related
Jan 6, 2010
Only lately I notice that my CentOS 5.2
(Linux centos52-64-fuj 2.6.18-92.el5 #1 SMP Tue Jun 10 18:51:06 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
does not detect a second core according to /proc/cpuinfo
Quote:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
[Code]....
View 10 Replies
View Related
Nov 21, 2009
I have just bought new PC (Intel mother board "Intel DP43TF ATX" and Processor "Intel Core 2 Quad Q9550"). and I have installed centos 5.3 32 bit.
NOTE: All cores are enabled in BIOS.
When I issue below command, it shows only one core (not 4 cores): what could be reason!
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
[Code].....
View 1 Replies
View Related
Jul 6, 2010
i'm writing a simple program of client socket program. Here below is the code sample which i'm writing...
Code:
//tcp_client.c
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netdb.h>
#include<string.h>
#include<stdlib.h>
[Code].....
the above code works fine.if we copmile and run ./a.exe 192.xx.xx.xxx 1111 and press enter it works fine..everytime it asks "Please enter the message: " and if give that will be displayed in server. but my problem is i dont want to print everytime "Please enter the message: " i just want to feed some words one by one to the socket.
View 4 Replies
View Related
Sep 15, 2009
We are seeing recv err on socket 31: 0x36. What could be meaning of the error?.
View 1 Replies
View Related
Jul 6, 2010
I've got the F13 LiveCD that I was able to boot and use using the "nomodeset" boot option. From the desktop I'm trying to perform an Install to Hard Drive. I've read the Install from LiveCD post regarding the creation of a /boot partition and a / root partition. I've tried creating them without the LVM group and with. But every time I appempt to install I get...
An error occurred mounting device proc as /proc: mount failed: (9, None). This is a fatal error and the install cannot continue.
Hardware is a Sager 8887 (P4, 3.06HT, 60GB HDD, Radeon 9000 graphics adapter)
View 7 Replies
View Related
Jun 4, 2010
I want to configure socket timer to release socket(port) once the connection is terminated. Do we have something in Linux OS to configure this delay to release socket?.
Any command, link or man-page anything will be helpful.
I browsed a lot but unable to find it.
View 1 Replies
View Related
Dec 7, 2010
Anyone knows the difference between a socket and TCP connection for connecting to an external system?
View 1 Replies
View Related
May 5, 2009
I had installed Fedora 10
Below is the output of uname -a
Linux 2.6.27.5-117.fc10.i686.PAE #1 SMP Tue Nov 18 12:08:10 EST 2008 i686 i686 i386 GNU/Linux
I need to enable telnet service on it, then found xinetd and telnet-server not installed,
Then I had installed below
First I had installed Xinetd: xinetd-2.3.14-21.fc10.i386.rpm
then I had installed telnet-server: xinetd-2.3.14-21.fc10.i386.rpm
After installation I executed below commands
Service xinetd start
Chkconfig xinetd on
Chkconfig telnet on
Service iptables stop
Chkconfig iptables off
Iptables �F
After I had tried telnet localhost ----IT FAILED
when I run telnet server manually by issuing the below command
/usr/sbin/in.telnetd, I get below error
[COLOR="Red"]/usr/sbin/in.telnetd: getpeername: Socket operation on non-socket[/COLOR]
I have other system running same OS, I had followed the same steps discussed above to enable telnet, It works fine on it.
View 1 Replies
View Related
Mar 30, 2009
im getting that error in my code for some reason. I compiled my code, and when i try to run this server it throws me an error on my call to setsocketopt(). The only way it can reach that part of my loop is if it succeeds when it calls sock() so I dont understand why the error says its an operation on a non-socket. Im just trying to set up a server to pass messages from a client to it a viceversa. Here is the code:
Code:
int main()
{
int socket_fd, new_socket_fd, k;
struct addrinfo hints, *server_info, *p;
struct sockaddr_storage peer_address;
code....
View 7 Replies
View Related
Jun 10, 2010
the difference between /proc and /sys? Also, When enabling public-key authentication using SSH, what file on the remote machine must be modified and how?
View 1 Replies
View Related
May 5, 2010
today i install centos x86_64 in my server, but /proc/cpuinfo display 2000Mhz . My processor model name : Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz, before the server had centos i386 and display 2800Mhz.
View 3 Replies
View Related
Mar 30, 2010
Red Hat Enterprise Linux Server release 5.4 (Tikanga) 2.6.18-164.11.1.el5xen (Xen release for virtualisation)
I'm trying to track down a problem with a utility that used to work and now hangs indefinitely. Since its hanging, I suspected a locking problem, and went to have a look for the process ids in /proc/locks; I get:
148: FLOCK ADVISORY WRITE 30279 ca:21:49153 0 EOF
148: -> FLOCK ADVISORY READ 30282 ca:21:49153 0 EOF
Now as near as I can tell this shouldn't be my problem, since the two ADVISORY locks - one READ and one WRITE - shouldn't conflict with one another. But I'd like to understand it all the same. I haven't been able to find any kind of definitive guide for the format of /proc/locks entries, but what I did find in the manuals specifically states:
"Each lock has its own line which starts with a unique number. "
Which is obviously not true; both of my lines start with the same number. Also, since most search engines don't seem to play nicely with symbols, I can't find any reference to what the "->" means.
View 3 Replies
View Related
Jul 15, 2011
I am currently writing a JAVA script to monitor certain unix processes through JConsole. Upon having lots of trouble with runtime.exec, i decided to bypass the top/ps command call and just get the information straight from /proc/*pid*/whatever.Now i can pull back any information from any of the files I want, and the current way i determine the CPU usage of a process is as follows:
Add the UTime and STime of that process from /proc/pid/stat then divide my pidCpu by UTime + STime + NTime from /proc/stat, then multiply that by 100, should give me the % cpu usage a process is using, right?Theory being if I get the jiffies assigned to my process, I can divide that by the total jiffies the cpu assigns. However, my results seem to vary from the ones gathered from top and ps. What am I doing wrong?
View 3 Replies
View Related
Aug 8, 2010
unknow filesystem in my computer./proc/sys/fs/binfmt_miscPlease help me for remove this filesystem.How i do remove this filesystem?OS : ubuntu 10.04
View 2 Replies
View Related
Jan 31, 2010
I am pragmatically trying to upload a list of files from my client machine to a proFTPd server I have running on Ubuntu. Every time I get several (around fifty) files into the transfer, I get the following error: Quote: Connection reset by peer: socket write error
I am able to remotely upload 25,000 small files of ~ 1K in size, but when I go to upload hundreds of 2-4 Mb files, I get a socket write error. Am I using up all available sockets before they can be released? If so, how do I release the sockets? If not, what does this error mean and why am I getting it?
View 1 Replies
View Related
Aug 24, 2011
/proc/bus/usb/devices should not be used anymore (and can't be mounted anymore on Ubuntu 11.04) But what is an alternative to it, for use in a terminal? I could easily grep that output to look for a certain device, but I'm lost in all the /sys/ entries...
View 1 Replies
View Related
Jan 6, 2011
in understanding the output of /proc/pid/shed
se.exec_start : 0.000000
se.vruntime : 26974.800748
se.sum_exec_runtime : 198.280320
[code]...
View 1 Replies
View Related
Sep 13, 2010
i had some issue with the machine rebooting multiple times, What happens is that the machine boots up and suddenly crashes and then boots up cleanly. I was going through the log files during when this occurs. I came across /var/log/syslog which i guess logs messages before shutdown. It has following messages which i think are causing problem.
Could not open /proc/26694/stat: No such file or directory
Could not read the file /proc/26694/stat
Could not open /proc/31128/stat: No such file or directory
Could not read the file /proc/31128/stat
Does any one know what these messages are?
View 2 Replies
View Related
May 10, 2010
I'm working in CentOS 5.4 with the default 2.6.18-164 kernel (which I will be editing but have reverted back to in order to solve this problem.)
Near the end of the init script I have thrown a /bin/sh to get into a busybox bash shell in order to test some scripts. Ive attached the init below.
While in this shell I can see my usb drive in /proc/bus/usb/devices and my hard drive in /proc/scsi/device_info however I cannot mount them as they are not in /dev.
I have scsi emulation set in the kernel. When I plug in a USB stick it finds the address but still no sign of it in /dev. There are other modules listed in /sys/module such as usbcore that dont show up in lsmod, is that possibly the problem?
Init Script
Quote:
#!/bin/nash
mount -t proc /proc /proc
setquiet
echo Mounting proc filesystem
echo Mounting sysfs filesystem
mount -t sysfs /sys /sys
[Code].....
View 4 Replies
View Related
Jun 16, 2010
I would like to find out what sources created this /proc/stat?
View 2 Replies
View Related
Aug 4, 2011
As I understand it, setting /proc/sys/vm/overcommit_memory to 1 is supposed to make sure malloc always succeeds, and set the OOM killer loose if there's an actual memory problem.
I'm wondering what happens when you've malloc'd so much memory that you've exhausted the address space for your process? Does it return NULL despite the overcommit_memory setting, or does your process get a signal? Or something else entirely?
View 1 Replies
View Related
Mar 28, 2010
I have a script that needs to extract certain information form the /proc/net/ip_conntrack file once in a while. I do not wish to run this script as the root user.
Default permissions for the file is:
I can change it with:
But that does not stick after a reboot. Is there some configuration file for file-permissions in the /proc directory in Ubuntu Server 9.10? Or do I just have to stick a chmod line in some startup script?
View 1 Replies
View Related
Jul 5, 2010
I'm interesting in knowing what processes could be altered to improve performance and functionality on my system. And which process may be the best one to alter
View 2 Replies
View Related
