General :: Cron Not Working / Updating Opensuse 11.0
May 4, 2010
I am new to Linux and have done an install of Moodle 1.9.8 on Linux OpenSuse 11.0
I have created my cron via the terminal (crontab -e) root crontab - see below:
When going to /var/log/messages my cron entries appear as they should but my backup does not run and every morning when I go to the Notifications tab it tells me my crom maintenance script has not run in 24hours.
I would also like to get this in a log file and emailed to me.
View 2 Replies
ADVERTISEMENT
Oct 4, 2010
After a lot of work I succeeded in making my Icon 225 Mobile Broadband working under Linux, so I immediately took advantage of this by updating my system.But unfortunately not everything went well. I have to say something:in Linux when you solved a problem another one pops up. And this is what happened to me. The first problem was the following error message: PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium [URL]
It seems that in the Online update system there is a error: or the address is wrong or something is not working as it should be. Anyway I got over it and the system started to download the updates and so on. At the end the system asked me to reboot and I did it. Unfortunately a cold shower was waiting me : the KDE interface did not work anymore, the only thing I could see was something like a fog all around the video. The mouse cursor was a dark square. I was still able to hear the welcome sound so I deduced that only the graphic interface was corrupted. I rebooted again and when the system show me the booting choices:
1) Desktop opensuse 11.3-2.6.34.7-0.3
2) Failsafe opensuse 11.3-2.6.34.7-0.3
3) windows 1
4) windows 2
5) Floppy
I chose this time the second one (I think it is like a safe mode)and fortunately it worked but the system looked like having lost brightness (I think this choice change the card driver). Now I do not know why the KDE inrface got corrupted, because I download everything from the opesuse website, so no strange repository has been installed. I checked in the little manual supplied with the DVD and I found the following suggestion: If the KDE interface got corrupted please try to remove the cache files of the KDE desktop using the following command rm -rf /tmp/kde-user /tmp/ksocket-user
View 9 Replies
View Related
Nov 28, 2009
From packman repo. Running from konsole gives
Code:
john@linux-nohf:~> devede
DeVeDe 3.15.0
Locale: en_GB.UTF-8
Using package-installed files
Failed to load modules DEVEDE_OTHER. Exiting
john@linux-nohf:~>
View 8 Replies
View Related
Aug 22, 2011
I run a Fedora 9 server at home, to host an "old school" MOO.To back up the database, I scheduled a cron job - and got some help with the script.I don't fiddle with stuff on the server much, because I don't really have a clue - leave well enough alone.But now I'm without backups. (I'd prefer to get this working, as it seemed pretty simple, and worked well for so long).
View 14 Replies
View Related
Oct 5, 2010
It is little weird now that cron job is not working as i have set. I have set weekly job to send email but i am receiving multiple emails daily. Below is my code; # sends email every monday at 4:00 am 00 04 * * 1 /usr/bin/ruby /home/mbm/www/current/script/runner /home/mbm/www/current/app/models/add_to_delayed_job.rb -e production
00 -> Minutes
04 -> Hours (0-24)
1 -> Days / 0-6 / Sun - Sat
Sending email is fine but the time is not working so far as set.
View 2 Replies
View Related
Aug 9, 2010
I make a script to automate burning backup files on dvd. It works fine if I start it from root user, but if I start it. From cronjob do noting. I try on growisofs the option -use-the-force-luke=force but nothing happens. I check the env of cron:
HOME=/root
LOGNAME=root
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
PWD=/root
SHELL=/bin/bash
SHLVL=1
XDG_SESSION_COOKIE=3e0d70f7b71074a0b1fff4bb4aa97d13-1281297181.926502-724038309
_=/usr/bin/env
and it seems ok i've got my script in /usr/local/bin and growisofs in /usr/bin
Code of my script below:
#!/bin/bash
bkup_path='/bkrepo/';
prefix='PAR*';
totdimfile=0
for FILE in $(/bin/ls -r $bkup_path$prefix)
do
dimfile=`/bin/ls -l $FILE | /usr/bin/awk -F " " '{print $5}' `
let "totdimfile += dimfile";
if [ "$totdimfile" -lt "4700000000" ]
then
NAMEFILE=`/bin/ls -l $FILE | /usr/bin/awk -F " " '{print $8}' `
ALLNAMEFILE="$ALLNAMEFILE $NAMEFILE";
fi
done
/usr/bin/growisofs -use-the-force-luke=force -Z /dev/scd0 -R -J $ALLNAMEFILE
/usr/bin/growisofs -M /dev/scd0=/dev/zero
/usr/bin/eject
end code of my script
View 1 Replies
View Related
Aug 12, 2010
How to schedule a job using cron that shouldn't run between working hrs 9am-5pm, while run in non working hrs every hour, every day of the month, month & week.I tried the following way, not sure I can use logical not operator(!).
View 3 Replies
View Related
May 23, 2011
Got a small problem, I'm trying to schedule a script to run every Thursday at midday and the scheduled tasks application on Ubuntu doesn't seem to work. The script is fine when I run it from a terminal.I have zero experience using cron at the command line, can anyone tell me what I should do?
View 2 Replies
View Related
Apr 26, 2011
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# m h dom mon dow user command
[code]...
View 7 Replies
View Related
Sep 8, 2011
The back.sh script is being run as user basil, whcih means that when it comes to copying the backup file to the target location you do not have the correct permissions to access the contents of the directory (it is rwx by root only).So, what do we do? Hoping it is ONLY the directory permissions which are fouling things up we have a range of options which, in not particular order of 'good', include:
a) change ownership/permission on target directory.
b) have the back.sh script run by the root user
c) set up sudo to permit the file copy to be done by root
d) use setuid on the back.sh to have it run, effectively, as root
A lot of the answer will depend upon what else the Dropbox directory is for. If it's JUST for your backups for this then I'd be inclined to:
Code:
chown basil /root/Dropbox
chmod g+rwx /root/Dropbox
which will permit the basil user full access and thus allow the file operations being done and give root access via the group permissions (not that the root user really needs this).Also, I'd be inclined to:
Code:
chown basil /home/xxxx/moo3/bin/back.sh
chmod u=rwx,g=rx,o= /home/xxxx/moo3/bin/back.sh
which will make things 'look' better, it just reinforces the point that the script is run (and owned) by the basil user.
View 3 Replies
View Related
Apr 8, 2011
linux and windows dual boot.
Dell desktop (older)
openSUSE 11.2
Windows XP
Grub Bootloader
I had XP installed first then i installed openSUSE and configured for dual boot. What do I have to do to reinstall windows? Can i just do it like i normally would and just make sure it installs on the correct partition and doesn't do anything to the others. I don't want it to screw up the bootloader or something else.
View 8 Replies
View Related
Aug 3, 2010
I have two servers. One of them has a svn server running and another hosting projects.
I have a daily cronjob updating the projects -- ie running svn update, rebuild etc.
Now, my cronjob on the remote server works.
However, a similar cronjob running on the local server for local projects (ie the same server as svn) is instead displaying a "svn: not working copy".
I double checked the paths, permissions and user info and if the script is launched manually, it works fine.
Deploying the same thing remotely works.
I even tried using file:/// (suggested here http://www.hightekhosting.com.au/myaccount/knowledgebase/90/Using-SubversionorSVN-on-cPanel-Servers.html) but still nothing.
View 1 Replies
View Related
Apr 23, 2011
i am posting my question in this forum . I was installed Ubuntu 10.04 and installed Vspace software and its working fine but yesterday its collected updates and installed in this after this its saying that this version of kernel is unable to support Vspace
View 1 Replies
View Related
Sep 18, 2010
I installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.
View 3 Replies
View Related
Oct 30, 2010
After I create a cron job to shred some documents it seems to start and then immediately stop. What am I doing wrong? For instance, here is my cron:
#!/bin/sh
DISPLAY=:0.0
PATH = /usr/local/bin:/usr/bin:/usr/sbin:/bin:/sbin:
[code]....
View 2 Replies
View Related
Jun 1, 2011
I have a cron job to run every 15 minutes. The cron job is running per /var/log/cron. It lists the job every 15 minutes.
[Code]...
I do not see any errors. I also looked in /var/log/messages for any errors and it does not list any. I added a line to the script that is running to send an email to me to see if it is running or not. When I run the script from the command line, the script runs without error and I get an email. I have searched and can not find what it going on. Is there some where else errors might be? Could there be a permission issue? The cron job is not being added by the root user.
View 14 Replies
View Related
Nov 13, 2010
I set up a job in my crontab file to clear the /tmp file on bootup with the following line:
Code:
@reboot rm-rf /tmp/*
My /tmp folder is not clearing. I've never used cron before;
View 7 Replies
View Related
Jun 27, 2015
I have a ts3.desktop file in my /usr/share/applications folder that I want to run on system boot. I have typed the following commands which don't work
Code: Select allcrontab -e
Then in the editor, I typed the following line at the bottom of file. I also made the necessary carriage return after this line.
Code: Select all@reboot gtk-launch ts3 /usr/share/applications
Then I pressed ctrl+o to save it.
After I put these commands in, I did the following command to troubleshooting this issue, see below.
Code: Select all$ crontab -l
no crontab for server
$ps -ef | grep cron | grep -v grep
root 532 1 0 21:35 ? 00:00:00 /usr/sbin/cron -f
But after I reboot and nothing happens, the application doesn't start.
View 1 Replies
View Related
Jun 18, 2011
I'm trying to remotely schedule a shutdown using cron but I can't get it to work. I did setup the following 'sudo crontab -e'
Code:
For some reason doesn't this work, since I was able to login and get this output when using 'date'
Code:
View 7 Replies
View Related
Jun 29, 2010
I'm running cygwin 1.7 on a vanilla win2k3 r2 server. I've put together a simple crontab that I'll paste in her in a sec. The crontab entries call several shell scripts that do either scp's or rsync's from linux servers to this win2k3 box under cygwin.
The problem is that the scripts work and run fine from the commandline. Just not when called from the crontab. I'm running from the root equivalent administrator UID. The crontab log files are empty of errors.
crontab is:
Like I said, the scripts execute fine from the command line.
View 3 Replies
View Related
Jan 20, 2010
I'm creating a script all worked fine in the command line. But not work in the cron. Below you could see the script
[Code]...
So far I found when I use corn following part not working, nothing goes to the processedfiles file. ls -l /var/lct/mou2/processed | grep $TODAY | awk '{print " " $8}' > /home/trans/mou/processedfiles ls -l /var/lct/mou2/processed | grep $YESTERDAY | awk '{print " " $8}' >> /home/trans/mou/processedfiles This work perfect in command line. Corn job and command line use by the same user.
View 6 Replies
View Related
Aug 17, 2010
I've read a lot on how to setup a task in crontab. I think I understand how to edit the file, but when I try to save the changes, it says "no crontab for xxx." Then it says that it cannot create a new crontab. I have ubuntu desktop 9 running as a webserver. I've read the details in these posts and it isn't helping.
[URL]
View 3 Replies
View Related
Jul 13, 2010
Have a headless server running Lucid 64 bit. Everything is working great except for a couple of Cron jos I'm trying to have run at boot.
My user crontab looks like this:
# m h dom mon dow command
01 * * * * /home/ceallred/Scripts/SambaBkup.sh
@reboot /usr/bin/SpiderOak --headless &The SambaBkup script works like clockwork...
The SpiderOak job doesn't start. It works if I type the command in manually.
syslog only shows:Jul 13 22:45:33 RavenWing cron[1010]: (CRON) INFO (pidfile fd = 3)
Jul 13 22:45:33 RavenWing cron[1022]: (CRON) STARTUP (fork ok)
Jul 13 22:45:33 RavenWing cron[1022]: (CRON) INFO (Running @reboot jobs)
Jul 13 22:45:33 RavenWing CRON[1048]: (ceallred) CMD (/usr/bin/SpiderOak --headless &)Yet ps -A doesn't show a running SpiderOak process. It shows after starting manually.
View 7 Replies
View Related
May 23, 2011
I am running a series of operations on executable matlab scripts which are connecting python and fortran scripts. I schedule the executables in cron. The problem:
- My original matlab scripts work perfectly.
- My executables work perfectly if I run them from the terminal. - Using the gui scheduled tasks and running the scripts once from a button, everything also works fine.
- But when I leave the scheduled tasks run on their own, I get an error! The error can be that the script hangs in general (I have some text logs exported every step to track the progress), or I get an error which never appears when I run the script with any of the other mentioned ways.
- I tried both cron command prompt or the GUI scheduled tasks
- I am running on Ubuntu 64 bit
View 3 Replies
View Related
Aug 21, 2010
I updated my Ubuntu version to 10.04 a couple of days back, and everything seemed to be working fine. Then, I switched off my wireless using the wireless switch. Since then, it does not respond to the wireless switch, i.e. nothing I do turns the wireless on again. I checked "Hardware drivers", and it shows a green circle saying that the Broadcom device is recognised and working. Oddly enough, the I can switch the bluetooth on and off my clicking on the panel and choosing the appropriate option. However, the wireless icon is not visible on the panel. I have also tried switching the wireless off and on from the BIOS, but that too has no effect at all.
View 1 Replies
View Related
Oct 1, 2010
I am attempting to schedule a task to run every hour. I have altered the crontabs for my account but the the task still won't run on the hour.
View 1 Replies
View Related
Oct 25, 2010
I installed an LAMP Server on 10.10. Additionally a simple Sambaserver and a VPN is integrated. Since 3 days I look at some strange behaviour:
Code: sudo init 6 does not take effect. Nothing happens. Code: sudo reboot is working, but all seems to be so ropy. It takes a significant while, before ssh-session is finally terminated. After the system comes up again, the vpn-client gets not the same IP-address by DHCP-server, but the next following of dhcp-range. That is strange, because no other dhcp-client is busy. After a second reboot I get the correct first IP-address of the dhcp-range. That is reproducible.
cron is not working any more. None of my jobs is being triggered. Nothing is logged in /var/log/syslog any more. Services (apache2, mysql, smbd) are not running at the start. I have to run them up manually. Seems like init is somehow smashed? What is your guess? What futher information do I have to provide for analysis?
View 2 Replies
View Related
Apr 29, 2011
Can anyone tell me how i change the default domain name for cron?everything i cron runs it emails from and to user@com.com
this leaves me with a massive list of failed mails in postfix.i have mailto on my main crontab but i cant do it on all of them.
View 1 Replies
View Related
Feb 28, 2009
I do not know how it came to pass, but it has come to pass. I was in the process of updating my desktop Fedora 10 (KDE) system with yum, when I finished that I got a message about
Quote:
I have no clue what this means.
View 8 Replies
View Related
Aug 7, 2014
I use Bluetooth on my laptop since many month, but afer a recent update (running jessie), my device stopped being usable :
gnome Bluetooth interface say "no Bluetooth device", and here is lsusb :
Code: Select all16:30 mathieu@kubrick ~ % lsusb
Bus 002 Device 003: ID 5986:0315 Acer, Inc
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
16:34 mathieu@kubrick ~ %
and lspci :
Code: Select all16:38 mathieu@kubrick ~ % lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
[code]....
most sad is :
Code: Select all16:41 mathieu@kubrick ~ % hcitool dev
Devices:
16:41 mathieu@kubrick ~ %
View 0 Replies
View Related
