I'm trying to download / execute the Centos 5 64bit auto installer: [URL] Once obtained, how do I run that script?
root@server [~]# wget http://download1.parallels.com/SiteBuilder/4.5.0/autoinstaller/parallels_installer_v3.3.2_build080710.09_os_CentOS_5_x86_64
--12:39:13-- http://download1.parallels.com/SiteBuilder/4.5.0/autoinstaller/parallels_installer_v3.3.2_build080710.09_os_CentOS_5_x86_64
[Code]....
I have recently installed FC12 64 bit. I have been using Fedora now since I first installed FC9 a few years back.
My main problem is that I am unable to execute any files at all using the ./filename command. I spent last night trying to run the ipod bootloader and all I kept on getting was the message: unable to run binary file. I used the command chmod +x ipodpatcher before attempting to run it, but with no luck. After a while of frustration and a few suggestions online I booted up my Ubuntu OS and the file ran first time. Am I missing a program on FC12? Do I need to install something else?
I feel it may be simple, however I have never experienced this problem before using Fedora. Any suggestions?
Trying to setup a new Ubuntu machine and just downloaded 'p4' (Perforce command line client). It's a single file download - a statically-linked binary executable, so I just did:
wget [URL]
...right into /usr/bin. Simple enough. Except:
root@aj-ubuntu:/usr/bin# ll p4
-rwxr-xr-x 1 root root 748808 2010-02-11 16:54 p4
root@aj-ubuntu:/usr/bin# ./p4
[Code].....
On an Ubuntu 9.10 (Karmic Koala) machine, I burned a CD from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso.The CD now contains an executable and some files. I tested the CD by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message:bash: ./FPS1_1: Permission denied.I can open other files like text documents (the executable also comes with shared libraries).I realized I had burned the CD as root so I burned another one as another user but I still have the same problem.
View 2 Replies View RelatedI just installed amanda-backup_client-2.6.0p2-1.rhel4.i386.rpm on my Red Hat Enterprise Linux 4 system. But I don't know who to check if it successfully installed or not. When I try to run amrecover from root, I get:
-bash: /usr/sbin/amrecover: cannot execute binary file
I have installed RHEL-5 on a 64-bit machine recently, and want to install java. Earlier when I did "java -version", it showed jre1.4.0. But for my application , I need jre 1.5.0 or later, so I decided to download jre1.6. I am the root user here and I downloaded the jre1.6 as rpm.bin as well as simple .bin format.
But the problem is that when I tried executing any of them, I am getting below error message :
" ./jre-6u16-linux-x64-rpm.bin: line 368: ./install.sfx.20520: cannot execute binary file"
Moreover, now when I tried "java -version", it is not showing any thing.
Could anybody suggest me how can I resolve this deadlock situation, as I need to install my other application at the earliest.
I am a little confused about the Debian installer. I chose the i386 release of Debian 6, downloaded the ISO and installed in a Core2-Quad with 4Gb of RAM. That lead me to a System with a 64Bit Kernel and a 32Bit environment (is that the correct word for it?). Why would the installer chose to install a 64Bit Kernel, even if i386 installation media was explicitly selected? Though it is easy to change the kernel manually after the installation is complete, I really would like to know if there is a good technical reason for selecting a 64Bit Kernel in this case.
View 2 Replies View RelatedI have downloaded a file called logkeys-0.1.1a. I unzipped it, but when I try to install (i type "sh install"), it says "/use/bin/install: cannot execute binary file".
View 11 Replies View RelatedI'm new to Fedora, and haven't used any flavor of Linux in years. I'm attempting to run a few benchmarks that were given to me by my instructor, but every one I try to run gives an error "Cannot execute binary file". For instance,.inp.inThis command gives an error:bash: ./Mcf: cannot execute binary fileIt is not a permission problem, I have confirmed the file has execute permissions (one of the things I still remembered after all these years). I suspect all the benchmarks I have been given were compiled on Ubuntu. Would this be causing the problem? I do not have access to the source code, so I cannot recompile. If that is the problem, is there a way around it that doesn't involve throwing away a weekend and starting fresh on Ubuntu?
View 1 Replies View RelatedI found a Linux .x86 binary file that I've been looking for, but not sure what to do with it. Does this (*.x86) binary file format seem like something that could simply be run by command, or something that would need to be compiled first? There is not much information that I could find regarding the particularly file.
View 11 Replies View RelatedI have a strange issue on one of my machines. The same thing works fine on all the others. When I execute:
Code:
sudo -u myuser -i ls
I get:
Code:
/bin/ls: /bin/ls: cannot execute binary file
On the other hand if I just run
Code:
sudo -u myuser -i
and then run ls, it executes successfully, but I don't want to stay logged in as myuser I just want to run a single command.
I'm trying to install this app called genBlast. It's a bioinformatics tool that does some cool stuff (I guess the actual use doesn't matter that much). Anyway, it comes as a .tar.gz folder with about a dozen executables in it; no compiling necessary. I extracted it to the desktop so I didn't have to worry about permissions, and then just tried to run it from inside the directory (it's a command line app).
All of the executables work with a ./ except one, and it's the most important one for that matter. When I go to run it, I get the error message Code: bash: ./genblast: cannot execute binary file I've checked permissions with ls -l, run a chmod 'u+x' just to make sure, and everything else I can think of. But it just won't work. Also, I just installed it on another computer and it works fine, so I'm pretty sure it's on my end.
I tried to restart my httpd service.cannot execute binary file seems like the HTTPD wasnt stopped while it should be stopped. it skipped the 'stop' and just right away jump into 'start' command. my case is i just changed some php.ini configuration, and to have it changed i need to restart after changes.am i correct if i say my '/bin/rm' and '/bin/touch' files are corrupted?
View 3 Replies View RelatedI have download a 'package' that is meant to be used for genetic research and such...Anyway, i have downloaded the file and when i try to execute the included example, it says cannot execute binary file. i've tried all sorts of permissons/re-downloading/etc. I've pastted the attached readme that I followed EXACTLY, but am still gettin an error[URL]m/here is the readme that comes with it:EMINIM : Expectation-Maximized INtegrative IMputation
0. GETTING STARTED
0.1 Uncompress the package
$ tar xzvf eminim-1-beta.tar.gz
[code]...
I'm trying to compile a simple script for a ar71xx (bleeding edge /from snapshots) Openwrt router.I have previously compiled scripts for Kamikaze 8.09. I just copied the gcc file inside the SDK dir and used it without problems.
View 4 Replies View RelatedI am using Karmic. I just downloaded Cinelerra from sourceforge. Apparently there is no installation, you just run the binary (according to the Readme). The binary is set to be executable (-rwxr-xr-x), but when I double click it in nautilus nothing happens. When I go to the app directory in the terminal and do:
[Code]...
Trying to install Parallels Plesk Panel 10 x86_64 onto a completely new installation of Ubuntu 10.04.1 LTS
root@server:~# chmod +x parallels_installer_v3.7.1_build101014.17_os_Ubunt u_10.04_x86_64
root@server:~# ./parallels_installer_v3.7.1_build101014.17_os_Ubunt u_10.04_x86_64
-bash: ./p.arallels_installer_v3.7.1_build101014.17_os_Ubun tu_10.04_x86_64: cannot execute binary file
When im typing any command its giving error -bash: /bin/ls: cannot execute binary file. how to resolve this im using fedora 13.
View 11 Replies View RelatedWe are trying to install Oracle RPAS 13.1.1 on Redhat Enterprise 5 Linux Server, when we open the directory rpas/rpas/bin, the file DomainDaemon needed to start this server can be seen, but when we try to execute it as ./DomainDaemon it says "cannot execute Binary file", for that reason all files in this directory are giving same message .
We have tried the following :-
a) Given Execute permissions using chmod and run that.
b) Done file DomainDaemon to see if the file is corrupt.
c) Even tried executing using superuser account.
d) The OS and updates required as per Hw&Sw Requirements of RPAS 13.1.1 are there.
e) The directory has Execute Permissions
I have tried to execute the below ns.c program in RHEL 4 by using the command
#gcc -c ns.c -o ns.o
i am not getting any errors but while i am running object file by using the command
#./ns.o
i am getting the below error
bash : ./ns.o cannot execute binary file
/* trinoo daemon */
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
[code].....
I have two sets of drivers to install, one for a wireless device I'm trying to enable and the other is an driver set for a newly installed nVidia graphics card. Both drivers are from the manufacturers site.I'm running Ubuntu 10.04 on a Dell Precision 380.In terminal:
chmod a+x rt2870.bin
then:
./rt2870.bin
[code]...
i cant find a link to download a 64bit version from and im wondering would it run java ok?
View 9 Replies View Relatedadobie's 64bit linux has links to 32bit downloads with a link to a page that talks about the 64bit version with a link back to the 32bit download page
so anybosy got the address of the 64bit player
I have java jdk1.5.0_08 installed on linux x86_64 architecture and I can execute java -version no problem. I took the same binaries and installed on ia64 architecture and the command java -version gives and error "cannot execute binary file" The Linux OS versions are 2.6.18-128.1.10.el5 on x86_64 and 2.6.18-128.4.1.el5 on ia64 Do you know whether the jdk1.5.0_08 binaries are compatible between x86_64 and ia64 architecture. The answer may be no, but I may be wrong and there could be some other issue. Where can I get the jdk1.5.0_08 specific to ia64 architecture for Linux version 2.6.18-128.4.1.e15
View 1 Replies View RelatedI'm using Lucid Lynx Ubuntu and I am trying to install a windows software with wine from cdrom. the problem is that the installer is not trusted and neither I can change permissions nor copy it on hard-drive because the file is huge. how to force wine to execute this installer?
View 1 Replies View RelatedSo I am trying to install Plastic 2.8.148.0 on a virtual server. I have the install package that i copied over to the machine using WinSCP i then gave the file executable permissions by using the command "chmod +x PlasticSCM-professional-2.8.148.0-linux-installer.bin" But when i try to install the package by using the command "sudo ./PlasticSCM-professional-2.8.148.0-linux-installer.bin" It gives me the following message.
sudo: unable to execute ./PlasticSCM-professional-2.8.148.0-linux-installer.bin - No such file or directory
why it isn't recognizing it? I know the file was there because i was able to change permissions and i can see it with -ls command.
I would to start my computer and right after Linux finishes booting, a terminal automatically is opened and a certain program is started.
View 9 Replies View RelatedI'm new to linux, and I've been following a paper [URL] to build a linux cluster using RedHat 5. I'm up to part VII step 5, installing the message-passing software MPICH2-1.4, and I'm not quite sure how to "execute the compile command 'make' to generate the binary codes of MPI."
View 13 Replies View RelatedI am facing problem on executing commands like df -h,ls-l,grep etc in /bin.
it is showing below errors:--
----------------------------------------------------------------------------------
login as: root
root@220.226.102.217's password:
Last login: Sat Jun 4 11:14:20 2011 from 220.227.54.149
-bash: /bin/egrep: cannot execute binary file
[code]....
I have bought a cepstral Text to speech voice, but it is only usable from the command line. I want to be able to copy text from firefox and execute it automatically in the command line. Is there a way I can do that?
View 9 Replies View Related