I installed yum-plugin-show-leaves and yum-plugin-remove-with-leaves but I have no clue how to use them.I was trying something like
Code:
yum list *foo* --show-leaves
but it gives me the following message:
Code:
Command line error: no such option: --show-leaves
I'm trying to switch from debian to fedora (13) and I'm stuck at getting yum to remove leave dependencies.
So far I've installed "yum-plugin-remove-with-leaves" and I'm able to remove leave dependencies if I invoke yum with the "--remove-leaves" argument from command line.
But this doesn't work with graphical front ends and I want to remove unused leave dependencies every time if I remove a package not just if I remember to invoke yum with the "--remove-leaves" argument.
Later on I discovered an option in "/etc/yum/pluginconf.d/remove-with-leaves.conf" named "remove_always = 1" and uncommented it. But yum doesn't seem to care. I still need to add the "--remove-leaves" argument otherwise yum isn't going to remove the leave dependencies.
How to configure yum to handle dependencies the way I used to know from apt under debian? Install a package with a graphical front end and dependencies get pulled in as needed. Uninstall a package later on and dependencies installed in the first place are removed as well if not needed by anything installed in between.
I have a Fujitsu T730 and I just love 11.04 with Unity. One of the two things missing so far is a 'Show Desktop' button that works (there is a crude workaround I tried and dismissed: [URL]). If I understood correctly there is a Compiz plug-in under development here:[URL] how to install that?
View 4 Replies View RelatedIs there a way to have the Invada and Calf pugins show their GUIs in Opensuse 11.2 with Ardour 2.8.4. The GUIs will show when opened outside of Ardour using the Calfjackhost but not in Ardour. The GUIs will display in Ardour when using other Linux distro I try but can't get them to show in Opensuse.
View 1 Replies View RelatedI am trying to install javain my machine but dont think its happening.
Now when i verify my java installation online on java website it show missing plugin.
I',m having trouble running the zotero openoffice integration plugin in F13 under the openjdk plugin.It's known top be not working as per The problem lies in some permissions as reported here -fedora-linux/However i want to know if there's any progress on it, since i dont have privilege to install it in my lab computer. Also i found this old bug reportwhich seems to have something done.If anypone has any idea please post, else i think i need to file a new bug report.EDIT: I'd be glad even if someone can guide me to write local policy (.java.policy) to enable the plugin
View 1 Replies View RelatedI am trying to set up a simple script to automatically invoke streamripper to record my favourite radio shows. The script works fine in a terminal window (Konsole), but when scheduling this as a cron job (KCron via SystemSettings) a Konsole window pops up catching the streamripper output.
Now stramripper can behave with the --quiet option, and I set output redirects "> /dev/null 2>&1". Inside the script or on the command line of KCron.
Quote:
sh myscript.txt >/dev/null 2>&1
...or just as the script without the "sh" command. Same result. Still the same annoying Konsole terminal window pops up, now with no other content than what Cron obviously generates at the end of the script execution:
Quote:
--------------------------------------------------------------------------------
End of script execution. Type Enter or Ctrl+C to exit.
--------------------------------------------------------------------------------
Well, the whole point of this cron scheduling was to avoid manual intervention and create the MP3 file of the radio show automatically. how to avoid the terminal window completely?
Using KDE 4.5.5 and Fedora 13, Kernel 2.6.34.8-68
I try to install the java plugin but the java test pages show not installed. I have tried the openjdk-6-jdk package and the Oracle/Sun 1.6.0_26 version to no avail.
Is there some good instructions page someplace? I have yet to find a set of instructions that provides something clear that works.
Is there a way to get it to really remove packages and delete all the files that the installation created?
View 2 Replies View Relatedthis time last week I was happily running 10.10. I decided to upgrade to 11.04 via Update Manager (not a fresh install), and of course I didn't like Unity so gave Gnome3 a shot.
Well.. at this point the system would stall whilst booting.. so I downloaded the 11.04 disc and reinstalled it (I desperately need to keep my data and don't have any backup options at the moment).
But, now when I boot into Ubuntu (using an Acer Aspire 5741), the resolution is about 800x600, and the mouse doesn't work. Has anyone got any ideas how I can force Ubuntu to reconfigure the system as if it was a completely new install?
What's happening: When booting, after the summary screen, the monitor turns blank. And not just any kind of blank, the back light shuts off but the monitor doesn't go into hibernate mode. I've tried several threads and followed many steps to reinstall grub. By basic grub-install, to purging grub entirely and reinstalling it in a chrooted environment. I have four SATA drives and I've read this is a problem. However, when using the BIOS to choose which SATA drive to boot from, they all yield the same problem, except one, which complains about putchars not being found or something. But searching for that problem just brings me back to the same steps I've already followed to reinstall grub.
Windows XP and Windows 7x64 are both installed as well, and I know grub seems them just fine.
I don't know what else I can do. bootinfo.sh: Boot Info Script 0.55 dated February 15th,
[Code]...
So, Dockbarx leaves icon almost always, as I close any window, it disappear only if I move the cursor over it. Does anyone know how to fix this? Here's a link to demonstrate it, [URL]I have ubuntu 11.04
View 5 Replies View Relatedmy desktop is dual boot XP and 64Studio, wired to wireless router and cable modem.XP has no net access (only used for a few games)Recently enabled internet on XP for online gaming but decided against it so disabled network again.Now when I boot into 64Studio there is no internet connection. My laptop still has wireless net connection through router. I can re-enable internet access for 64Studio by ooting a live CD first (usually Mepis 8) and then reboot to 64Studio, then all will work properly for every subsequent reboot unless windows is started, then I need a live CD again.I have tried various live CDs, Mepis 8, Ubuntu, Debian, all reactivate eth0 I tried # ethtool eth0 | grep Link after a windows reboot and no link detected, but link detected after a live cd reboot.
View 2 Replies View RelatedI am using openSUSE 11.0. This OS installation gives firefox 3.0.5 Beta. I had installed new version of firefox at /usr/local/bin/firefox. I had placed link of this firefox at /usr/bin using this command ->
Code:
linux-snvz:/usr/bin # ln -s /usr/local/bin/firefox/firefox firefox My older firefox contains the flush plugin. So i can easily played ..... video's in my browser. But now my new browser saying that it doesn't have flash plugin. I was tried to install flash plugin once again.
[Code]...
Even after installation also my browser is again without flash plugin.
I just updated my distribution to 11.3 from 11.2. But now this problem occurs when I try to play an mp3. There was no problem before with 11.2.
It also says
Code:
The following plugin is required : MPEG-4 AAC decoder
Only certain mp3s have this problem. All gstreamer packages have been installed. What package is missing anyway?
Looking at the results of both `lsof | grep IPv4` and `netstat -tp` I noticed that I have a lot of connections open from a program called 'gvfsd-http'.
Using google, I found that this was a Filesystem something from Gnome, that would also be used If I drag something from my browser to my desktop.
Though I wonder, how I activated it, because I didn't do that...
After a bit of searching, I noticed that `screenshots.debian.net` uses the same IP address as the one noted (hades.car.gr).
PING screenshots.debian.net (78.46.20.5) 56(84) bytes of data.
64 bytes from hades.car.gr (78.46.20.5): icmp_req=1 ttl=56 time=55.4 ms
Question: Do I have some tool enabled that maybe sends statistics to debian or so? Where to find it and kill it.
I don't know if anyone else has noticed this, but this is the biggest pain when I'm trying to read XKCD. When I mouse over an image in Firefox and the tooltip appears, and I scroll down when it's still there, the tooltip is replaced by a gray box.
View 1 Replies View RelatedIs there anyway to have like a desktop icon in the panel, that like shows all the items on the desktop but leaves the background clear, similar to how it is on windows? I keep creating new folders and i hate it when my desktop gets full.
View 7 Replies View RelatedI'm using cron to run a tunnel. It is a looped script which never exits, and thats why I don't want cron to wait for it. This is a crontab entry:@reboot $HOME/cron/portfw.sh &When I run it manually, everything is ok. But when cron runs it, a defunct sh process keeps running until portfw.sh and it's child are killed. Somehow cron knows that processes spawned in background and keeps waiting for them and ignoring the fact that parent process exited. I tried using setsid to change spawned process group, but it did not full cron, it still knows about child processes
View 9 Replies View RelatedI have been playing around with Ubuntu 10.10 for a few days. I had the functionality of when my mouse left the active window it would fade and any window behind it I moused over would come into focus. I liked this feature, but I broke it somehow. I was playing around with Compiz and all its cool animations, cube transitions, and other stuff. I am not sure if I did something in Compiz to break it or if that is unrelated.
View 3 Replies View RelatedI'm a heavy user of Eclipse. It's my workhorse. Today, the thing started crashing on me. So, I started the thing from the console to see what the last message is before crashing, but...nothing. It crashes whenever I hover over something that is supposed to give a pop-up (you know, the yellow-ish popup with a help text).
Any clues to what I can do to remedy this? As I noted, there are no return messages, so, that's all I have here...
i have this-for me huge problem- xfce4-xkb-plugin won�t save my keyboard setup and it won�t show after startup in xfce4 panel (xubuntu 9.10): I did this:
1) i added in /etc/default/console-setup needed keyboard layouts (de,hr,rs)-because i know that after restart xfce4-xkb-plugin will not memorize my layouts.
[Code]....
While using Rhythmbox this morning, I was greeted by a blunt and undiscriptive error message:
Code:
Plugin Error:Unable to activate plugin Cover Art.Going to the plugin page, I was supprised to find that most of the installed plugins would not load. Without any info being offered in the player, I looked on line. Many people had problems with other plugins, and most of the time it was a problem with an uninstalled python package. But I checked on this site and I found that I had all of these packages installed. (Well, the python ones at least, to check all of them would take forever.)
Code:
[URL]
After finding no help there, I ran rhythmbox -d to debug:
Code:
(12:04:33) [0x934fe68] [rb_python_module_init] rb-python-module.c:406: Init of python module
(rhythmbox:4971): Rhythmbox-WARNING **: unable to load module as python runtime could not be initialized
[code]....
I am able to get into GRUB and boot Linux, but whenever I select Windows, all I get is an error about a missing boot loader.
After the Windows install disk failed to repair it, I reinstalled the Windows system and then used the Ubuntu live-CD to restore GRUB in order to be able to boot into Linux again. Now I have the same problem as when I started (although the error screen is somewhat different now).
Does anyone know how to break this "evil circle" of mine?
I am using the 10.10 (GRUB 2 in other words).
I am using RHEL6 on a server with 3 interfaces.
eth0 is connecting via a Cisco switch to the outer world and eth1 and eth2 to internal networks.
eth1 and eth2 are working without problems all the time, however I have the following incident with eth0: although it is RUNNING, and after it works for some time (like some hours), it then becomes incapable of sending/receiving traffic. Here are more details, after the interface exits the RUNNING state:
[root@mgt ~]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr E4:1F:13:6C:87:74
inet addr:9.162.91.26 Bcast:9.162.91.255 Mask:255.255.255.0
inet6 addr: fe80::e61f:13ff:fe6c:8774/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
[Code]....
I am wondering whether there this is because there is not traffic for some time and so the interface goes to idle. Is there any parameter I can tweak in RHEL6 to force the interface to remain RUNNING even in the absence of traffic (although I would be expecting that some 802.1 packets would be periodically flowing from the switch to the interface)?
I have a computer whose display I want active all the time, but that I don't want people coming up to and doing anything on. At the same time, I want the keyboard and mouse to remain connected because even though they will seldom be needed, when they are needed it's important that they be available quickly.I guess I'm looking for a screensaver that doesn't save the screen. Something that prevents the mouse and keyboard from doing anything unless a PAM authentication is entered, just like a screensaver would
View 1 Replies View RelatedI have a dual Monitor Setup, both SXGA LCDs, one rotated left. With kernels and Xservers available from debian making settings appropriate kills X and apparently leaves modesetting and keyboard missconfigured - monitors say: no signal and it is not possible to switch to any VT until sysrq-unraw (alt-print-r) is pressed, which makes the system responding to keyboard, but still leaves the screens blank. Restarting the display manager sets a working mode with both screens showing the same.
View 1 Replies View RelatedI updated the package libcgic-devel to a newer release of the same version. The change in the distributed files includes renaming a file cgic.html to index.html. I have both files installed now and cgic.html is orphaned.
View 6 Replies View RelatedI am using samba to share some folders from a Ubuntu server (10.04) onto Windows XP. This works fine, but once in a while (once/twice a day), samba crashes and leaves a dead.letter in the folder I was accessing. Here are mode details:
lsb_release -a
Code:
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 10.04.1 LTS
[Code]...
Sometimes screen leaves defect behind when menu selected. when it does this, it is extremely slow to pull up the menu.
View 8 Replies View Related