Fedora :: Executable File Into The '/etc/cron.daily' Directory
Jan 19, 2011
I have noticed that in the /etc directory there are some subdirectories of /etc/cron.daily and /etc/cron.hourly. Also I have determined that there is a service included as part of the Fedora OS 'crond' which I have started with the use of 'service crond start'. My question is this. If I drop an executable file into the '/etc/cron.daily' directory will it just run? If not what configuration files should I go about editing to run my executable daily? There seems to be a pretty large network of cron related files. I'm trying to make sense out of all of it.
View 9 Replies
ADVERTISEMENT
Jan 29, 2011
I have added some executable scripts to /etc/cron.daily but don't get the stdout/stderr output from them as mail (or anywhere else I have found). At least one of them is running (because I can see that it has added a file to the disk).
The peculiar thing is that I do get the output from /etc/cron.daily/0logwatch (part of the logwatch package) as an email each day.
The MAILTO line in /etc/crontab is "MAILTO=root" (unchanged from default). Same for /etc/anacrontab.
I do have an alias at the end of /etc/aliases which redirects root's mail to my own account, but this alias works fine for mail I send manually. (It also appears to work fine for the output from the file /etc/cron.daily/0logwatch.)
View 3 Replies
View Related
May 31, 2011
I am running on a laptop and cron.daily is set to run at 0625 So I wonder what happens if my machine is not turned on at that time.. At that rate it could also be off for the other periods as well (weekly, monthly) Is there solution that will allow them to run once they are online after the appointed time? using a cron entry that runs every 15 or 5 or 1 minute.
View 2 Replies
View Related
Feb 25, 2010
It seems that cron is not upgrading my Ubuntu 8.04 LTS Server, no GUI installed. I changed /etc/crontab and watched apt running:
Code:
ps -A | grep apt
showed it for a long time,
Code:
sudo tcpdump tcp
showed communication with canonical sites,
but:
Code:
top
did not show any apt using CPU
[code].....
View 2 Replies
View Related
Dec 31, 2008
I have an issue, it doesn't happen every day, I can't seem to trace it down. It happens at 4:02am the cron.daily kicks of at 4AM.. The following is from the /var/log/messages. I receive an panic error then the server shuts down.
View 1 Replies
View Related
Oct 26, 2009
I'm having a very strange issue with cron on centos 5.3 64-bit. I have 3 cron scripts in /etc/cron.daily which run backups. They are as follows:
script1:
#!/bin/bash
/usr/local/bin/backup-script1
script2:
#!/bin/bash
/usr/local/bin/backup-script2
script3:
#!/bin/bash
/usr/local/bin/backup-script3
The contents of the 3 /usr/local/bin scripts are ...
/usr/local/bin/backup-script1:
#!/bin/bash
synbak -s srv1 -m rsync
rsync -av --delete /data/backup/srv1/* root@::share/srv1/
To explain this, the 1st active line does a synbak backup and the 2nd active line rsyncs the backup data to a remote server.
/usr/local/bin/backup-script2:
#!/bin/bash
synbak -s srv2 -m rsync
rsync -av --delete /data/backup/srv2/* root@::share/srv2/
[code]....
View 7 Replies
View Related
Nov 30, 2010
since I setup my system so that I'd receive system errors via email, I get an email each day from /etc/cron.daily/apt.Just wondering why this is, how I can fix it, or if I can just remove apt from cron.daily?uote:
To: root@jon-desktop
Subject: fcron <systab@jon-desktop> run-parts --report /etc/cron.daily
/etc/cron.daily/apt:
[code]....
View 3 Replies
View Related
Feb 21, 2011
I'm with Ubuntu server 10.10. I created a script and put it in /etc/cron.daily. But looks it doesn't run (it didn't generate any log). The following is all I did.
Code:
root@chonseng1:/var/log# cat /etc/crontab
# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab' command to install the new version when you edit this file and files in /etc/cron.d. These files also have username fields, that none of the other crontabs do.
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# m h dom mon dow user command
17 * * * * root cd / && run-parts --report /etc/cron.hourly
25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )
#
root@chonseng1:/var/log# ls -l /etc/cron.daily/ntpdate
-rwxr-xr-x 1 root root 52 2011-02-18 13:22 /etc/cron.daily/ntpdate
root@chonseng1:/var/log# cat /etc/cron.daily/ntpdate
ntpdate ntp.ubuntu.com >>/var/log/ntpdate.log 2>&1
View 7 Replies
View Related
Nov 25, 2010
I made a big rookie mistake in a script in cron.daily, which emptied the directory when I tested it... now I'm left with an empty cron.daily directory, and from what I know there definitely were more scripts there than only my own. Does anybody know what scripts CentOS 5.4 (Final) needs in the cron.daily?
View 3 Replies
View Related
Sep 30, 2010
My backup script works fine after some effort to get it where I wanted it. So the script is fine when I run it.
sudo bash backup.sh
now I have a sym-link to /etc/cron.daily but I do not see any new backups
View 9 Replies
View Related
Nov 9, 2010
I have two custom tasks running daily. How do you give priority to one over the other?One of them is configured via the logrotate.conf. The other sits directly in cron.daily.I'd like the one in cron.daily to run after the script that is in logrotate.Please can you advise how to do this...
View 3 Replies
View Related
Jun 28, 2010
I would like to create a cronjob that will delete all files within a directory 1 hours after it is created to the folderI found this cron find /path/to/file/* -ctime +1 -exec rm {} ; but it's deleted all files.I want to make an exception, all file should be deleted except one file (letsay file a.zip)
View 16 Replies
View Related
Oct 4, 2010
I have the following cron entry but it doesn't seem to be running:
Code:
The script does exist. And so does the directory /home/usr/log and writable. /var/log/syslog only has a bunch of these:
Code:
I don't see any file gets written to the log directory. That suggests to me that cron didn't run the job, as confirmed by /var/log/syslog.
View 9 Replies
View Related
Jun 20, 2010
I am running into a snag on .exe files in Lucid. I have Wine installed, but I can not open the file as it is blocked from executing with a window popping up telling me that this file was blocked due to security reasons. I go into the files properties and try to change the permission but that does not help. Is there a way to get around this? Possibly in the terminal as root?
View 3 Replies
View Related
Jan 4, 2010
As we have executeable file extensions .exe , .msi and .msp for Windows. What is the file extension that is executable in Linux RHEL 5
View 3 Replies
View Related
Apr 4, 2011
I tried to run Mupen64 on Fedora 14 and SELinux gave me a message (see title of thread). It sounded like a serious problem. Do I have a corrupted version, is it nothing to worry about?
View 1 Replies
View Related
May 30, 2011
I downloaded Java from the Java website, and went into the root to try and make it an executable file, and it says "chmod: cannot access `home/Non-Admin/Downloads/jre-6u25-linux-i586-rpm.bin': No such file or directory". Is there some sort of program I can install that will automatically turn the rpm.bin/.bin into an executable file?
View 8 Replies
View Related
Aug 21, 2011
I hope this post stands in the right section.I have a commandline i need to enter in terminal when i want to run a program. i tought lets put that piece of command in an .sh file and just click the file to run the program (then i dont need to open terminal first an give in the command) however the .sh file does not open the program. so i propably need to make a executable (application/x-executable).
View 3 Replies
View Related
Feb 15, 2010
I have a script called, test.sh, which is located in /home/username/scripts/ I know that I can run it by typing ./test.sh from the /home/username/scripts/ directory... but what do I do to enable the script to be run from anywhere *WITHOUT* having to type the whole directory path?
View 3 Replies
View Related
Nov 6, 2009
I wanted to use cron to play a media file at a certain time (i.e. use it as an alarm clock). However it seems to do nothing. The contents of my crontab is:
SHELL=/bin/bash
PATH=/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=root
HOME=/
# For details see man 4 crontabs
# Example of job definition:
# .---------------- minute (0 - 59)
# | .------------- hour (0 - 23)
# | | .---------- day of month (1 - 31)
# | | | .------- month (1 - 12) OR jan,feb,mar,apr ...
# | | | | .---- day of week (0 - 6) (Sunday=0 or 7) OR sun,mon,tue,wed,thu,fri,sat
# | | | | |
# * * * * * command to be executed
5 11 * * * env DISPLAY=:0.0 /usr/bin/totem /path_to_file
View 2 Replies
View Related
Jun 27, 2011
Create the following directories: parent/child
Navigate to child and create a file named child (this is an executable file in my case, not sure if that makes a difference). I need to create two "link to executable" links in the parent.
I had assumed that this would work:
ln -sf ./child ../child1
ln -sf ./child ../child2
But that creates a "link to folder" (./child) in the parent directory. If I change it to:
ln -sf -t.. ./child child1
ln -sf -t.. ./child child2
I get an error, "ln: '../child': cannot overwrite directory".
If I do it from the parent directory (which I cannot do, this is part of a Makefile recipe):
ln -sf ./child/child ./child1
ln -sf ./child/child ./child2
It works. Note that I cannot alter the names of any directories or files. How do I create the links when the current directory is the child?
View 1 Replies
View Related
Oct 25, 2010
I use the following code to send make-up file dialy via sftp with expect. When I run it from command line, it has no problem sending to the remoteSERVER side, but when it is running via crontab task, it did not do the put, so did not execute the batch file defined in -b option.
#!/bin/bash
#!/usr/bin/expect
curDate=`date +%Y%m%d`
filename="$RESULTS/make-up.${curDate}.001"
newname="make-up.${curDate}.001"
remoteDirName="/Inbound/PPP"
tempcmd="$RESULTS/tempcmdFiles"
[Code]...
View 1 Replies
View Related
Sep 19, 2010
I have NDISWRAPPER installed on my laptop, but when I try to install the download file which is a Windows Xp dos executable file of 8mbs I have tried every thing but without success I can see my Iomega 250 Zip drive when I go into system>administration>disk utilities and acess properties but cannot make it run,
Dell inspiron 6400
OS: Ubuntu 10.04LTS
Ram:2gb
HDD: 250gb
Tony044
View 1 Replies
View Related
Feb 18, 2010
In a project I'm working on with a few other people, I got the task of writing an assembler. The last thing I do is convert the commands into a binary representation, and jam it into a file. Now one of my teammates said he'd like to be able to "reference" the code within another program. He said he'd be able to do this if the file I output is a Linux object file. I'm thinking it'd also work as an executable. Anyway, he said he'd like to be able to grab the file and reference the binary by address. I'm still fuzzy on this, and if you're confused with what I said here, please tell me so I can ask him for better details.Anyway, I'm aware that gcc can compile files to ".o", but that's only for C/C++, and my file is just binary. I'm also aware of "ld", but I haven't seen any use of it to help me. I'm happy to hear suggestions as to what I can do. If anything, I think I'll implement a few functions to grab the bits and hand them to him in an array or something.
View 8 Replies
View Related
Sep 29, 2009
I have a php script in cron directory that generates 5 textfiles, after the files are generated, I want to create a script that will move the 5 text fiels to anoher folder name "web".
View 2 Replies
View Related
Oct 24, 2009
What's a good cron script for backing up and zipping a directory of files, or multiple directories with files, to a backup directory on my server, on a daily basis?I found an easy to use mysql backup script, now I need to backup my site directory, but not all the directories in it. So I need a method in the script to omit certain directories from backing up, ie dirs that contain gigs worth of files.This seems like it should be one of the most common crons to set a server up with but two pages deep in google (and here) I have yet to find anything remotely resembling a solution.
View 9 Replies
View Related
Aug 13, 2010
Does executable file contains the precise path to SO file? Should it be compiled with precise knowing of SO file location?
View 8 Replies
View Related
Oct 26, 2010
after updating my system I can't start VirtualBox-OSE anymore. I get the error:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I try to remove and to re-install VirtualBox-OSE again, still the same error. VirtualBox works as root but not from a user account. The installed version is VirtualBox-OSE.i686 3.2.6-2.fc13 @rpmfusion-free-updates
View 12 Replies
View Related
Mar 28, 2011
I am trying to run Ansys on Fedora (64bit), but every time I do it gives me this error. "error while loading shared libraries: libXm.so.3: cannot open shared object file: No such file or directory"Please help as I am stuck with this issue for long.
View 6 Replies
View Related
Mar 4, 2010
i have a problem with realplayer 11 i can't open it due to that error message
Code:
/opt/real/RealPlayer/realplay.bin: error while loading shared libraries: libgdk-x11-2.0.so.0: cannot open shared object file: No such file or directory so how can reveal this problem
View 4 Replies
View Related
