I wanted to try VirtualBox so I did:
Code:
yum install vboxgtk
In the list of dependencies I found that it needs to download kernel. I was just curious to know that why can't it manage with the PAE kernel. It requires the kernel 2.6.31.12-174.2.3.fc12 whereas I've got its PAE version working right now. Can someone please explain why is it so?
For some reason, when I click on the Slackbuild link for virtualbox-kernel (3.1.6) for virtualbox-kernel-3.1.6.tar.xz , it downloads as virtualbox-kernel-3.1.6.tar.tar. The file is misnamed. If it is renamed virtualbox-kernel-3.1.6.tar.xz , the SlackBuild works just fine.
View 10 Replies View RelatedTrying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
where to download Guest Additions Virtualbox for Fedora 14 ?
View 4 Replies View Relatedmy error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
When I install the latest F12 kernel, my F12 installation freezes immediately on boot. The previous kernel booted fine. It's a little strange, because if I edit the grub.conf to use the old kernel, the freeze still occurs.Is anyone getting Kernel 2.6.31.12-174.2.22 to work in virtualbox? (both yes and no answers would be useful here)Does anyone have any idea of the cause (and especially, why updating the kernel would cause the _old_ kernel to freeze as well)
View 14 Replies View RelatedI'm trying to get a fedora guest running reliable smp under VirtualBox 3.0.6. The VirtualBox manual says "Some Linux distributions, for example Fedora, ship a Linux kernel configured for a timer frequency of 1000Hz. We recommend to recompile the guest kernel and to select a timer frequency of 100Hz." So I tried recompiling the kernel. Being a responsible lad, when it came to setting the kernel specs:
Code:
# Polite request for people who spin their own kernel rpms:
# please modify the "buildid" define in a way that identifies
# that the kernel isn't the stock distribution kernel, for example,
# by setting the define to ".local" or ".bz123456"
#
# % define buildid .local
%define buildid .rim_for_vbox
I've successfully built and installed kernel, headers and firmware:kernel-2.6.30.5-43.rim_for_vbox.fc11.x86_64.rpm
kernel-firmware-2.6.30.5-43.rim_for_vbox.fc11.x86_64.rpm
kernel-headers-2.6.30.5-43.rim_for_vbox.fc11.x86_64.rpm
The system is working fine (well, so far). But trying to install the VirtualBox Guest Additions kernel add-ons still gives me
Please install the build and header files for your current Linux kernel. The current kernel version is 2.6.30.5-43.rim_for_vbox.fc11.x86_64. I'm pretty sure this is because my kernel doesn't match the development packagekernel-devel-2.6.30.5-43.fc11 (x86_64). So the key question is, how on Earth do I create a development package to match the responsibly-renamed kernel?
with the new kernel update, my virtualbox won't open. Something about installing DKMS something first. Where would I find this to install?
View 3 Replies View RelatedHow can I use DKMS to force the virtualbox setup to run using the correct kernel sources? This is the error I'm getting in the vbox logs
Code:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.2
Deleting module version: 3.1.2
completely from the DKMS tree.
Done.
Creating symlink /var/lib/dkms/vboxdrv/3.1.2/source ->
/usr/src/vboxdrv-3.1.2
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.31.6-166.fc12.x86_64 cannot be found at
/lib/modules/2.6.31.6-166.fc12.x86_64/build or /lib/modules/2.6.31.6-166.fc12.x86_64/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
Failed to install using DKMS, attempting to install without:
Makefile:152: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
Code:
[root@nevada Downloads]# uname -r
2.6.31.6-166.fc12.x86_64
I have downloaded latest version of sun vm virtual box foe Fedora 13 x64. After installing and creating a VM when I want to start vm I got this error. And when I enter this command on terminal :
/etc/init.d/vboxdrv setup
I get this error:
Code:
[root@localhost arash]# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
Log file:
Code:
[root@localhost arash]# cat /var/log/vbox-install.log
Makefile:159: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
[root@localhost arash]#
I tried to install the new Vbox 3.2.6 through rpm as a guide told me but I first had errors with the older vbox dependencies, so I uninstalled vbox 3.1.8.2 and now I am with a vbox period. Is there something I can do to fix this I tried this tutorial didn't work for me [URL] and another on the fedora forum (lost the history). error I get is Recompiling VirtualBox kernel module [FAILED] and Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing.
View 5 Replies View RelatedI am new to fedora core and needs desperate help.Now what i can notice is the kernel files doesnot match. will this makes a difference..what do you think ? How can i make the VirtualBox kernel module status [OK] ?
View 5 Replies View RelatedAfter updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
I generally check what updates are being installed. This time sadly I didn't and again this kernel had one missing module. VirtualBox-OSE stopped working. It had been working fine with other upgrades. No it's not a problem with dkms or other stuff. This kernel doesn't have vboxdrv module like other kernels...i verified it...
[Code]...
The 2.6.38.8 version doesn't have vboxdrv module!....hence again I have to roll back to older kernel. So before blindly upgrading....read this message!
I had no problems up to the newest kernel version. But for 2.6.40-4 akmods fails to build the kmod with the following error:
Code:
Building RPM using the command '/usr/bin/akmodsbuild --target x86_64 --kernels 2.6.40-4.fc15.x86_64 /usr/src/akmods/VirtualBox-OSE-kmod.latest'
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-4.fc15.x86_64/vboxnetflt/vboxnetflt.mod.o
LD [M] /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-
[Code]...
I'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code:
Failed to open a session for the virtual machine Win7Main.
The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
[code]....
I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
On Fedora repo I found VirtualBox-ose packages there. What will be the difference in operation/function between their packages and the packages download on virtualbox.org website?
View 5 Replies View RelatedI'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
View 2 Replies View RelatedI opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
I use Fedora 14 32 bit at home and I d not have internet in home , so I download all packages are depend on Fedora 14 in my work place and move all of them to home by USB flashI use rsync for download all packages , in home I make local repo and install all packages I need by use local repo ,right now I want update my kernel , and I want use rsync foe download kernel update for fedora 14 .How I can do this , I want rsync only download update are depend on kernel and does not download other thing How I can do this ?
View 3 Replies View RelatedI have 6GB of RAM and I'm planning to install Fedora 14 32-bit to achieve a higher degree of compatibility. Does fedora automatically download and install a PAE enabled kernel when it detects more than 4GB of RAM (Just like Ubuntu)?
View 14 Replies View RelatedI went to create a windows XP in my virtualbox and this pops up
Please install the virtualbox-ose-dkms package and execute 'modprobe vboxdrv' as root.
is this a safe download? its never asked me too do this before.
Today is two out of three boot messages fixed. Working on the third one now, and that relates to virtual machines. The whole Virtual machine thing is new to me. Never used it, but I'd like to start. Therefore, I am no longer willing to just ignore this. The error message during boot is this:
Quote: Starting VirtualBox kernel module [60G[[0;31mFAILED[0;39m] (modprobe vboxdrv failed. Please use 'dmesg' to find out why)
I have done a new install of Fedora 14 but the RTL8191 wirless card is not being recognised. Realtek have provided the driver source but the make operation is failing because (I think) Fedora 14 isn't provided with the kernel source to enable it to complete successfully.
Basically (in easy to understand steps): how do I download correctly the Kernel source to enable the driver make operation to proceed?
when I open virtualbox OSE and tried to run a vm i get this error
Code:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. So i tried doing what it said and I got this error when i tried to run /etc/init.d/vboxdrv setup (as root)
Code:
Stopping VirtualBox kernel module done
Recompiling VirtualBox kernel module, NOT. It has been packaged.Recompiling VirtualBox
[code]....
Then i ran dmesg and there was a ton of stuff that seemed to be unreleated so i ran dmesg -c to clear it. then i ran the vboxdrv this again then checked dmesg again expecting there to be nothing but the vboxdrv stuff but it was still blank.I really dont know what to do at this point I tried uninstalling and reinstalling but that makes no difference
I am using the 13.1 build scripts from slackbuilds.org. I modified the scripts to build 3.2.12 rather than 3.2.10.
In 13.1 the main VirtualBox 3.2.12 OSE package built and installed without errors. The VirtualBox GUI starts without errors.
Running the virtualbox-kernel-mksrctarball.sh script built a kernel source package without errors.
Yet the VirtualBox kernel module won't build. I receive the following error:
Code:
]*** Building 'vboxdrv' module ***
make[1]: Entering directory `/dev/shm/virtualbox-kernel-3.2.12/vboxdrv'
make KBUILD_VERBOSE= -C /lib/modules/2.6.33.11-smp-2/build SUBDIRS=/dev/shm/virtualbox-kernel-3.2.12/vboxdrv SRCROOT=/dev/shm/virtualbox-kernel-3.2.12/vboxdrv modules
[Code].....
I tried to build the virtualbox 3.1.6 kernel using the files from slackbuilds.org and I got this error that says it cannot find the kernel include directory. My current kernel is 2.6.33.2 (slack 13.1).
I tried SOME_VAR=/usr/include --> (I forgot the exact variable name, but I used the variable name I saw in the error message) just a guess , but it didn't work of course.
Is it at /usr/src/linux-2.6.33.2/include or something like that? Or is there anything wrong with the slackbuild script?
I updated my system to the latest version - 5.5. After that I could not install VirtualBox. I was thinking, trying to fix, googling... it over for hours... Finally I found the reason. VirtualBox installer searches for the source kernel at /lib/modules/2.6.18-194.17.4.el5/build, and it can not. Look into /lib/modules, I have some kernels such as:
- 2.6.18-194.17.4.el5
- 2.6.18-194.17.4.el5debug
- 2.6.18-194.17.4.el5xen
... and more old ones.
At that time, I booted on 2.6.18-194.17.4.el5 kernel. But inside that directory, there is no build or source (directory/ file). Then I looked into 2.6.18-194.17.4.el5debug, and it had. So I typed: ln -s /lib/modules/2.6.18-194.17.4.el5debug/build /lib/modules/2.6.18-194.17.4.el5/build