I am running Fedora 11 and every time i plug in my iPod it tells me... SELinux is preventing mkdir (podsleuth_t) "read" security_t ... I have no idea on how to create a policy module to allow access.
View 2 RepliesSElinux is blocking my internet connection and every time when I connect t the internet (pppoe connection) I ge message.
View 2 Replies View RelatedI'm trying to setup ssh access on my Fedora 12 laptop. I get the following error message in /var/log/secure when I try to login from another machine using ssh and the login is denied:
Code:
sshd[3025]: error: Could not get shadow information for <user>
sshd[3025]: Failed password for <user> from <ip> port <port> ssh2
If I do a 'setenforce 0' I can login and no error is logged.
Tried google and searching this forum to no avail. Under Fedora 14, there is an selinux policy which blocks sshd from making outbound connections on port 80 or 443. This can occur when a client box tries to tunnel through the ssh connection for encrypted access to the web.
While I did manage to allow this happen by creating a permissive domain for sshd with this command:
Code:
The preferred way would be to allow sshd to make connection on other ports with a similar command that does not seem to work:
Code:
Is this the correct way of allowing an outbound port connection for the sshd daemon?
When I turn on my SeLinux to enforcing mode on my Red Hat system ssh stops working and my http server stops responding.
I went into the SeLinux GUI and enabled things in there but still it wont work.
Any thoughts on what to check?
permissive mode and disabled they work
I read several articles that say it should not be affect by SeLinux and the setting look correct but the only thing I do is turn on SeLinux and ssh /httpd stop working
ps -eZ | grep sshd
system_u:system_r:unconfined_t:SystemLow-SystemHigh 432 ? 00:00:00 sshd
system_u:system_r:unconfined_t:SystemLow-SystemHigh 2426 ? 00:00:00 sshd
[root@goxsa1340 ~]# ps -eZ | grep httpd
user_u:system_r:httpd_t 3044 ? 00:00:00 httpd
[Code].....
when I try to connect to internet SELinux give my a preventing NetworkManager here is what its say:
Code:
Summary:
SELinux is preventing NetworkManager (NetworkManager_t) "getattr" to /dev/ppp
(ppp_device_t).
[Code]....
I can not stablish PPTP VPN because SELinux blocking Network Manager.
I get the following:
Summary: SELinux is preventing NetworkManager (NetworkManager_t) "unlink" to ./reso
Code:
I'm attaching complete alert.
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies View Relatedthis is the allert i got:Code:Summary:Your system may be seriously compromised! /usr/sbin/NetworkManager tried to loada kernel module.Detailed Description:SELinux has prevented NetworkManager from loading a kernel module. All confinedprograms that need to load kernel modules should have already had policy writtenfor them. If a compromised application tries to modify the kernel this AVC willbe generated. This is a serious issue.Your system may very well be compromised.Allowing Access:Contact your security administrator and report this issue.Additional Information:
Source Context system_u:system_r:NetworkManager_t:s0
Target Context system_u:system_r:NetworkManager_t:s0
Target Objects None [ capability ]
[code]....
Im trying to block iPod browsers or any similar mobile phones to access the internet.. I got this useragent.log entries"Mozilla/5.0 (iPod; U; CPU iPhone OS 3_1_2 like Mac OS X; en-us)AppleWebKit/528.18 (KHTML, like Gecko) Version/4.0 Mobile/7D11 Safari/528.16"I created an acl like acl mobile browser -i iPod to block all versions of iPod and deny it via http_access, but didn't block
View 1 Replies View RelatedI'm attempting to get MapServer running on my Fedora 13 computer. I was able to install with the package manager, and the executable (mapserv) was originally placed in /usr/sbin. But I need it in /var/www/cgi-bin to work on the webserver. So I copied the file to the right location. Unfortunately, it doesn't have the correct SELinux context. Here's the message from the troubleshooter:
SELinux denied access requested by /var/www/cgi-bin/mapserv. /var/www/cgi-bin/mapserv is mislabeled. /var/www/cgi-bin/mapserv default type is httpd_sys_script_exec_t, but its current type is httpd_sys_script_exec_t. Changing this file back to the default type, may fix your problem.
How's that for circular logic? Does anyone have an idea what the correct SELinux context for a cgi-bin executable might be?
Trying to keep selinux enabled. When I start SeLinux Troubleshooter from the menu, which is inautostart as well, It tells me SELinux not enabled, sealert will not run on nonSELinus systems".How do I get SELinux permanently started then
View 10 Replies View RelatedMy newly installed Fedora-14 (64-bit) has SELinux disabled. I can't find any way to enable it. I tried to set it manually in /etc/selinux/config to enforcing or permissive but nothing happens after reboot. In GUI configuration tool it is set to disabled and grayed out so that there is no way to enable it there. Is there another way to enable SELinux?
View 11 Replies View RelatedI tried to log in to my xguest account and it asked for a password, which it shouldn't, so there's a problem with SELinux.When I type getenforce it says it is disabled, yet when I go to /etc/selinux and look at the config, it is in enforcing mode and not commented out, type is strict.When I go to the SELinux management GUI I can't change the current enforcing mode and it's set to disabled and default to enforcing.
View 2 Replies View RelatedIn fedora 12 how can i configure the system such that a particular user can browse only selected web sites.
View 9 Replies View RelatedI want to ask about securing the FTP connection... I have one server that Installed with Redhat Linux Fedora 6.
And now, i want to securing the FTP access, so only the selected IP will be allowed to connect. Do anyone know how to do this?
Another thing is, my server using Webmin 1.3 to manage the server and there not installed / not configured yet with Frox FTP, ProFTPD Server, WU-FTP Server... even there is such thing in my Webmin...
Can i make use one of the three FTP i mention above, and if yes, will it be affecting the current FTP access?
I'm assuming that the following should block the complete 178.123.xxx.xxx address range.
Code:
iptables -I INPUT -s 178.123.0.0/24 -j DROP
Then I believe that I need to save this change.
Code:
service iptables save
iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ]
However, I'm not so sure that it is actually working based on the fact that there continues to be access to my wiki from that address range. The following is after I made the firewall change.
Quote:
178.123.177.61 - - [31/Dec/2010:04:24:40 -0500] "GET /mywiki/Opera%20Web%20Browser?action=edit&editor=text HTTP/1.1" 200 6346 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)"
code....
Let me state that I'm new at this iptables thing. I did some reading and decided that I need to make the above change to the firewall but it doesn't seem to make a difference.
since I upgraded to F15 I noticed that "su -l" is very slow, it takes about 20sec before it gives the prompt. I traced it down to a problem with "xauth" as su asks for the authorization for the display running "xauth nlist :0" which times out with an error. Actually, the command "xauth nlist :0" by itself gives:
xauth: timeout in locking authority file /home/user/.kde/tmp-host.domain/xauth-200-_0
If I put SELinux in permissive mode both command work without problem so I suppose SEL is the problem. I checked the permissions and settings of the file which is "unconfined_u:object_r:config_home_t:s0" but I have no idea if this is the right value, running "restorecon" on the file, directory or the whole /home/user didn't change anything.
I am new to Fedora 10, and to SELinux too.
I would like to know how can I prevent from users with role user_r to connect to Internet with firefox.
I get a SELinux relabel often even without changing stuff. SELinux troubleshoot doesn't show any error nor are there any messages in /log/messages that give any clue. Where should I look to see whats happening ?
2.6.31.12-174.2.22.fc12.x86_64
selinux-policy-3.6.32-103.fc12
I wonder if SELinux really are necessary for a home desktop ?
It only makes my computer use more problematic than it already is.
What can happend if I uninstall it on my Fedora 13 dist ?
Is the hole Internet going to come in to my computer and destroy it ?
If I uninstall SELinux, is the firewall uninstalled also ?
I have recently upgraded from FC12 to FC13, and last week I updated all packages using YUM. The system is running as a VM inside CentOS 5.5 using KVM. SELinux is enforcing, using the targeted policy. Bugzilla is version 3.6.1 and was NOT installed using RPM or YUM.
Bugzilla was working OK on this machine until SELinux was upgraded last week from 3.7.19-28 to 3.7.19-33, and is still broken after testing 3.7.19-37 from the testing repo. With SELinux in enforcing mode, apache returns error 500 when I browse to the main bugzilla page. The apache error log shows this:-
Code:
[Mon Jul 19 13:15:08 2010] [error] [client 192.168.40.1] (13)Permission denied: exec of '/var/www/html/bugzilla/index.cgi' failed
Nothing, and I mean absolutely nothing, is recorded in /var/log/audit/audit.log, /var/log/messages or /var/log/secure.
[Code]....
i get this warning from selinux :
"SELinux is preventing /bin/mailx from append access on the file /var/lib/rkhunter/rkhcronlog.OmRFCZOynG."
I tried to fix it by "# /sbin/restorecon -v /var/lib/rkhunter/rkhcronlog.OmRFCZOynG" as suggested by SELinux but it comes back with another warning, but with a different /rkhcronlog.xxxxxxxxx...
i think its just a way of rkhunter logging issue -. attached here is the actual error message by selinux.
I just install Fedora 15 and I see the SELinux Policy Genertation Tool and the SELinux Administration application in the app launcher but I do not see the SELinux Troubleshooter app. I seems to be missing. How do I get it on my system?
View 2 Replies View RelatedI need to change SELinux policy to permissive and then back to enforced for an installation. I understand that I should be able to do that through the SELinux Administration window accessed through System -> Administration ->SELinux Management. But I do not have any real sysadmin tools available in my Fedora 15 Gnome Gui interface. Am I missing something, or should I use some sort of similar command line tool to do this?
View 2 Replies View RelatedI know very little about SE Linux and I've heard that in some situations it's better to disable it. For a home user, is it important? Does it improve your life ? or does it get in the way ?
Last week some update stopped my printing and I had to install the new hplip from HP because it wasn't in the Fedora repos to correct the problem. I don't know if SELinux had anything to do with it, but today when I disabled SELinux a few minutes later I get a star up on the toolbar and when I clicked on it it mentioned something about hplip. It wouldn't make any sense to me but maybe this has happened to others.
Currently working on the targeted policy, I need a help in doing the following things as quick as possible:
1- How to create a totally new SELinux user (not mapping new linux user to SELinux user) I want a new user with no roles or with a maximum of 1 role. I also need how to compile the new user so I can used it for mapping users. At the time, I've tried creating a new file inside /etc/selinux/targeted/contexts/users similar to the other users inside this directory, but it did not actually seem to appear when using the command semanage to list SELinux users : semanage user -l
2- How to create a totally new SELinux role (empty for now) ? and how to make the relation between this new role and domains or types.
3- How to create new domain, actually following some old instructions I created the .fc and .te files, but not the .if file, which is more complicated than the other 2 file.
I've got a question about chattr command. is it possible to restrict a root access for this command. what i want is something similar to freebsd behaviour aka the kernel secure level. setting a particular security level results in limiting some operations (i.e changing immutable flags on files) by root. well, if someone gained an access to a machine in some way, nothing would stop him changing the file's flags. so the question is if it can be achieved with selinux?
View 2 Replies View Relatedwell after spending most of the morning getting help with my internet connection hanging when I dial up we discover that SELinux is causing it so when I set it to passive I can connect so how can I get it to allow me to connect while being set to enforcing?
View 5 Replies View RelatedI plan to install vmware but I had some problems...So I looked over the internet and I found that I must disable selinux....is this true? It means that I must have to disable the selinux for ever? And then, will my System be safe?
View 6 Replies View Related