Fedora Networking :: File For The Menubar Sistem->Administration->Control Net Interfaces?
Jun 17, 2009Wich is the file for the menubar Sistem->Administration->Control Net Interfaces(I think this is the translation)
sorry if it doesn't.
ADVERTISEMENT
Ubuntu Networking :: 2+ Internet Interfaces - Control Application Specific Usage?
Mar 24, 2010I currently have two internet interfaces installed, one is ethernet (eth0) and the second is wireless (wlan0). Many command line applications allow you to specify which interface should be used, but many gui apps don't provide this option or at least I haven't found it. I have some questions:
1. How would I tell Firefox to use only my wlan0 interface? If it's possible in Firefox, is this also possible with Google Chrome?
2. If a program doesn't provide a command line argument to support this, is there a standalone application that could help manage preferences for multiple applications?
Fedora Networking :: Enable 3 Interfaces \ When Start One Interface The Another Interfaces Goes Down?
Jan 25, 2010I have 3 Interfaces for a different LAN's and when I start one interface the another interfaces goes down.How can it's possible?I configure my ethernets as:
Code:
/sbin/ifconfig eth0 172.16.3.108 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth1 172.16.3.109 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth2 172.16.3.1110 netmask 255.255.0.0 broadcast 172.0.255.255
Ubuntu Networking :: ADVISEADDR: Error In Specifying Interfaces: No Existing Ip Interfaces Found
Jan 7, 2010I have a weird issue that I have not seen on any forum. My jaunty on DELL studio laptop seems connected to net, but I can not access any network service (ssh, firefox etc.). But when I connect a cable the cable lights blink as it should be and in wireless connection my wifi light blinks.
It was working 2 days ago without problem, and I have not done big changes recently.I removed and reinstalled network-manager and network-manager-gnome. Nothing changed. I see a message in each restart as follows (when Openafs is starting). I can reproduce it with "/etc/init.d/openafs-client restart"
Code:
ADVISEADDR:error in specifying interfaces: no existing ip interfaces found
#lspci
Code:
04:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
#lshw -c network
[code].....
Networking :: Run The Interfaces File After Modifying?
Jan 26, 2011I change the interfaces file to activate the DHCP service for my eth0.
How do I make the service active without booting the system. In other word, how do I run the modified interfaces file?
CentOS 5 Networking :: Where Are File /etc/network/interfaces
Jan 15, 2010I work now with Centos 5.4 and I would like configure my Ethernet, but I can't find the /etc/network/interfaces like in CentOS 5.2.
[root@headnode1 etc]# uname -rmi
2.6.18-164.10.1.el5 i686 i386
[root@headnode1 etc]#
Ubuntu Networking :: Adding Interfaces To /etc/network/interfaces?
Apr 16, 2010If I try to add a new interface (eth1) to /etc/network/interfaces, I get
Code:
* Reconfiguring network interfaces... SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
How do I add 2 interfaces and get anyone of them to work, as available ?
Ubuntu Networking :: Set The IP In The /etc/network/interfaces File And Reboot?
Jan 20, 2010DSL modem is a Speedstream 6520 router. All computers work fine via dhcp. I'm trying to setup a small server (print server, ssh & ftp servers). I understand enough of the software part of things to get it going, my problem is setting a static IP on the server box. Every time I set the IP in the /etc/network/interfaces file and reboot, I have no network connection. I can talk to the modem through the browser, but nothing beyond that, not even local computers.
/etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.254.202
network 192.168.254.0
netmask 255.255.255.0
gateway 192.168.254.254
ifconfig shows the .202 address, but box can't get to the outside world, and can't ssh into the box from a computer sitting next to it. If I let it dhcp, then I can ssh into it, and have access to the internet. In the modem, I have dmz set for that address. Wan address is static. I can ssh into it if I let it do dhcp, so I know it can work that far. But if I set static ip, I might as well pull the network cable. I've been beating my head on this for over a week, and I'm lost why I can't get it to work. I even changed the dhcp range on the modem, so the .202 is not in that range. There is no dhcp client installed that I can find. I'm using WattOS beta3, which is a light distro based on 9.04. The computer is an old Dell GX150, integrated nic. I have done ifdown and ifup eth0, still no happiness. Doesn't seem like it should be that hard, but I'm stumped. DMZ should let everything pass, so don't need to mess with port forwarding and such. I know it works using dhcp.
Ubuntu Servers :: Messed Up Networking Interfaces File
Dec 25, 2010For my router I need to change Ubuntu server from DHCP to static IP. So to do this I entered: Code: sudo vi /etc/network/interfaces ...and pushed the wrong buttons and exited the session suddenly by mistake. After learning how to use the vi editor I went back but I got a notice that the the last session didn't close properly and that a "swap" file had been created. Anyway, I entered my static IP info, saved the file, and attempted to restart with:
Code: sudo /etc/init.d/networking restart Restart failed and I got a notice that I should delete the /etc/network/interfaces.swp file so I did. Tried to restart again and, didn't get the .swp file conflict message this time, but failed again - this time I got the following message:
[Code]....
CentOS 5 Networking :: Which File Can Setup Up Network Interfaces
Jul 20, 2009which file can setup up my network interfaces? i was able to setup the nameserver using /etc/resolv.conf but I cannot find anywhere to configure the ip and and gateway. I could't find /etc/network/interfaces as you do on Debian
View 1 Replies View RelatedUbuntu :: Panel Menubar Wrong File Association?
Apr 12, 2011I somehow messed up the file association of the panels.... Alle Folders in the "places" are linked to vlc media player.... except the "Computer" icon If I drag a folder on the desktop it opens with nautilus as it should I remember that i wrote somewhere manually "vlc..." to associate a videodvd, that worked too well I deinstalled vlc, but i only get an errormessage then " cant execute child process" so its still linked to vlc.....
View 3 Replies View RelatedNetworking :: Statistic About Interfaces From /proc/net/dev - File Is Reset When Get Reach More Than 4G Byte
Jun 27, 2010I have to get soem statistic about interfaces from /proc/net/dev. but statistic on this file is reset when get reach more than 4G byte.I think linux has limitation on this case.
View 1 Replies View RelatedFedora Networking :: 13 - Get The Samba GUI Back Under: System->Administration
Oct 3, 2010I've been using samba without issue on Fedora 11 (x86_64) and decided to upgrade to F13 on one of my machines. Upon install I installed samba with the command: Code: sudo yum install samba samba-client cifs-utils I can now see the smb.conf file and could probably use samba via command line; but, I would really like to use the GUI to configure samba as I have in the past. The problem is, there is no samba gui. How do I get the samba GUI back under: System->Administration where it usually is?
View 4 Replies View RelatedFedora :: Unable To Edit My Menubar
Dec 8, 2009I'm unable to edit my Menubar, when i right-click on Menubar i have not "edit Menu" Choice! what's problem? How I can edit menus?
View 7 Replies View RelatedDebian Multimedia :: No Sistem Sounds
Oct 7, 2010I am on testing, using alsa and i have sound in players, login, flash, skype.....Exept window`s and buttons.
In sounds preferences, there are buttons to test the various system sounds. In this window the checkboxes for Enable sytem sound and Play System Sounds are selected. When I click the various buttons to test the sounds (default sound, drop etc. ) i hear sound themes. But when i close windows and use buttons there is no sound.
Fedora Networking :: What Happens With Multiple Network Interfaces
Apr 30, 2009What traffic goes where? Why? Any bandwidth advantage? What if one goes down?
View 4 Replies View RelatedFedora Networking :: Dhclient Cannot Find Interfaces
Sep 29, 2010I am running Fedora 13 and after my machine is booted my ethernet interface eth0 does not have an IP address. Running
Code:
At the terminal does not work, and I can see that in /var/log/messages I have the following error:
Code:
I assume that the same command was attempted during the boot process (please correct me if I am wrong) to use DHCP to get an address for eth0, but failed for the same reason it is failing after boot when I run it manually, whatever that reason may be.
I noted, however, that eth0 IS in broadcast mode:
Code:
I also noted that running
Code:
Does in fact work and will run DHCP and configure eth0 with an ip address.
It is quite mysterious to me why running 'dhclient eth0' will work, but manually running 'dhclient' does not.
Fedora Networking :: Two NIC One Machine / Way To Get Two Interfaces To Work Together?
Mar 24, 2011- eth0 is connected to a 'Green" interface of a smoothwall router.
- eth1 is connected to a 'Orange' interface of the same smoothwall router.
The smoothwall router is setup to forward port 80 to the address of the eth1. I can ping eth1 from the smoothwall router so there is that connection.I have a web server running on port 80 and I have opened port 80 in the firewall and made eth1 a trusted interface.In this configuration, when accessing the outside world all the traffic goes through eth0 and DNS is snappy and faster. The problem is that anyone outside can not access the web server with a timeout error.If I disable eth0 and set DNS info on eth1( DNS servers are the QWest IPs ), people can access the web server, but DNS is very poor often taking more than a minute for a look up.Is there any way to get the two interfaces to work together?
Fedora Networking :: Samba Server Not Shown In System Administration / Give Permission To Access Home Folder?
Jul 1, 2010I installed samba server in my external HDD. But it is not shown in system ----> Administration. Is there any problem. Then How to give permission to access home folder.
View 3 Replies View RelatedFedora Networking :: Change Network Interfaces Names?
Dec 11, 2009I found problem in FC 12 release. I installed fc 12 to server (earlier there was FC 7). Then as always i realised that names of interfaces (eth0, eth1, eth2 .... eth9) changed after install. eth0 became eth9, eth1 became eth5 ... Earlier on previous fedora releases i solved this problem correcting HWADDR in ifcfg-eth files, so i linked MAC addresses to names (eth0, eth1, eth2) as i wanted in a right order. Now I can't do this. After correcting these files and restarting network sevice i constantly get a message: device ... has different mac than expected. I looked ifup-eth file and compare it with the same one in fedora 7. And i found that in fedora 7 there is function rename_device which processes if HWADDR value doen't coincide with real mac address value. See code:
# remap, if the device is bound with a MAC address and not the right device num
# bail out, if the MAC does not fit
if [ -n "${HWADDR}" ]; then
FOUNDMACADDR=`get_hwaddr ${REALDEVICE}`
if [ "${FOUNDMACADDR}" != "${HWADDR}" ]; then
curdev=`get_device_by_hwaddr ${HWADDR}`
if [ -n "$curdev" ]; then
rename_device "${REALDEVICE}" "${HWADDR}" "${curdev}" || {
echo $"Device ${DEVICE} has different MAC address than expected, ignoring."
[Code].....
But in fc 12 release there is no function rename_device!!!!!!!!! So in this case if HWADDR value is not the same as FOUNDMACADDR value (which equal to REALDEVICE mac address) i just get an error message So I can't change interfaces names, as result i can't organize right order of network interfaces as it was earlier on fc7.
Fedora Networking :: Two Network Interfaces - Setup Default Gw Route?
Mar 26, 2009So I have two network Interfaces
eth0 - NAT behind a router
eth1 - Public IP
When ever I restart the machine, both interfaces pull a IP, but the it randomly chooses eth0 or eth1 to have the gateway. I want the gateway to be eth0 always.
[Code]...
Is there some file or setting I can modify in Fedora10 that will always choose 192.168.1.1 on eth0 as the default gateway?
Fedora Networking :: Set Up Multiple Virt Interfaces In Network-scripts?
May 15, 2009if I want to do eth1, eth1:0, eth1:1 etc and automatically configure them at startup where do I put that in the network-scripts?
View 2 Replies View RelatedFedora Networking :: F11 - Service Network Restart Does Not Bring Up All Interfaces
Jun 23, 2009If I restart the network service, not all interfaces come back up. Is this expected behaviour or does something need a kick?
Code:
[root@@aspire3500 ~]$ service network restart
Shutting down interface eth0: [ OK ]
Shutting down interface wlan0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
[root@@aspire3500 ~]$
Fedora Networking :: VLAN Do Not Work Over Bonded Or Bridged Interfaces
Aug 20, 2011I'm having trouble getting Fedora 15 to work with my em/bond/br configuration as it did in Fedora 14. I've got a bonding interface over em1 and em2, and then individual bond vlans (bond0.2, bond0.10, etc...), I then have a similarly named bridge interface (br0.2, br0.10, etc...) for kvm. Regardless of if I assign bond0.2 or br0.2 the IP address, I am unable to ping the gateway, but the native untagged VLAN (bond0, br0) has no issue at all.
To try to isolate this issue down to the switch or Fedora 15, I went with a plain em setup and configured em1, and em1.2 which works as expected. This issue has been plaguing me since Fedora 15 came out and I'm about to trash it and go back to Fedora 14 (Which didn't have this issue), but some of the new kvm features have kept me trying to get over this incomprehensible hump.
Fedora Networking :: Open The Network Device Control To Activate It But There Is No Network Ports In Network Device Control?
Jan 7, 2010I just added a 2 port network card to a system that is running Fedora 11, but it is INACTIVE. I open the Network Device Control to activate it but there is no network ports in Network Device Control. It is empty.It looks like the system recognize the card and loaded correct driver.
View 4 Replies View RelatedFedora :: Lost Volume Control / Internet And Battery Indicator From Control Panel On F11
Jul 15, 2009I feel little silly asking this, I accidently removed from my gnome panel my internet connection, volume control and battery indicator on F11. how can I add this back. It does not show up in the add to panel menu and the applications do not give you back the default feel.
View 1 Replies View RelatedFedora Networking :: Setup The Network Scripts To Create Two Network Interfaces For Vlan X And Y?
Apr 7, 2009Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 2 Replies View RelatedUbuntu :: Using The /etc/network/interfaces File
Apr 25, 2010I am trying to set the interfaces file to connect to my wireless network. Here is my interfaces file...
Code: auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet static
[Code]....
Ubuntu Networking :: Cannot Find Samba In Administration?
Apr 12, 2011installed samba by. but i cant find samba in system -> administration ? Should I useCode:sudo apt-get install samba4
View 9 Replies View RelatedFedora Networking :: How To Control Interface Names
Apr 23, 2010We are making an embedded product based on Fedora 10 (this could change, but right now we stick to 10 because it works ok). We have an intel PC board with a build a normal ethernet adapter. Then we have a home build PCI-express card with 4 ethernet adapter build into a Xilinx FPGA (Xilinx Temac) (we got the driver from git.xilinx.com and modified it enough to make it work).
Now, by problem is: How do we control the device names of these ethernet adapters? It would be really nice to have them called eth0, eth1-eth4 in the order mentioned above, such our software always knows which to use for what.
Also: What to we do when the our adapter card is replaced because it is broken? A new card will have new MAC addresses and therefore the adapters will get new names destroying our IP configurations.