I already got the source from here [url] i need ruby 1.8.7 because i want to install activerecord usually i use yum for installing anything. but for ruby,
Code:
Package ruby-1.8.6.399-6.fc13.i686 already installed and latest version
I often like to use packages that have to be compiled from source. However, even after downloading gcc, I can't compile anything, because the configure script gives me a message about being unable to execute C programs. I gather that this is because of a "noexec" option in /proc/self/mounts. Problem is that the file apparently cannot even be edited by root. Perhaps there is an alternate type of fedora distribution I could use?
View 2 Replies View RelatedI couldn't compile gammu-1.28 on my Fedora 13 when running ./configure.To make sure what i'm doing, i was install cmake from fedora repository directly using "yum install cmake" and completed. And then to make sure again, i was update my gcc using "yum update gcc". But there was still errors during running ./configure. Finally, i decided to update all needed inside my fedora using "yum update" to make sure again.
View 7 Replies View RelatedWhere do I find the linux-source package and the linux-headers package? Are they on the CD that I can copy to /usr/src (is that the right place...)? Or do I need to download them from the old-releases.ubuntu.com site?
The issue now is that the nVidia installer from their website wants the source code to build the right packages for this machine, however, I do not have the src directory with the source code that it is looking for. Is there some way to give this too it now?
I am running Mythbuntu 7.10
I am new to Linux, and I just tried to compile a program (powertab tools) from source. I'm having som problems doing that. The "./configure" command works fine, but when I run "make", it gives an error:
Code:
seppe@Thuis:~$ cd ptabtools-0.5.0
seppe@Thuis:~/ptabtools-0.5.0$ ./configure
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
[Code]...
I recently downloaded a source file from [URL] and wanted to compile it for fedora. I found that the source was written for ubuntu as all the instruction in README file was for ubuntu machine. Can I compile the source for fedora?
View 13 Replies View RelatedI've been using rubyripper quite happily on Karmic, now I've moved to Lucid and discovered a bit of an issue. rubyripper will pause for several minutes between tracks with ruby 1.8. If I upgrade to ruby 1.9.1 the gui client won't run due to an issue with libgtk2-ruby not being available for 1.9.1.
The cli version of rubyripper under 1.9.1 is blazingly fast, so that is what I'm using at the moment, but I do prefer the gui.
Anyone have any insight into this? Googling suggests there may be a bug in ruby 1.8.7 that caused the long pauses, but it was supposed to have been fixed in 1.8.7.249 i.e. the default Lucid version.
I am new to linux platform and my requirment is to write a makfile which can compile a tree for source file and create the output in separate directory .
View 1 Replies View RelatedIve been using linux for a few months now and every now and again i come accross a program that doesnt have a rpm package but says that it can be installed on Fedora using source. I'm familiar with build essentials and the following commands:-
tar xzvf package.tar.gz
cd package
./configure
make
make install
but from what i have read fedora uses a differnet compiler. I'm trying to install Buddi budget manager and the ./configure command doesnt work, which im guessing is because it doesnt have a configure file? Can anyone confirm how to compile from source and whether there are any tutorials specific to fedora.
There are a few things not working properly. Ruby version manager seems ok but untill i get working with ruby i don't know if it is working properly. One thing that is not there is irb Interactive ruby is not available according the the message i get.
Well i have no idea what readline is but i did everything that is on that webpage referance page [url]. I have got a lot of progress and learned heaps about linux shell and bash terminal. The thing is i need to get this going and have tried feenode but it is very foreign and how it works i do not have a clue. I have got 2 things resolved so far through this forum but using other threads in it. i need to get irb going before i can progress to using ruby on Rails properly.
I am using a Eeepc running ubuntu easy peasy its version 9.04 of ubuntu. I need the whole of rails to work and want to get a handle on using ruby version manager along with the apache stack with mysql/phpmyadmin and am using this as a dummy run for setting up a development system.
installed the fedora 12, but dont know how to use the source dvd to install the source package.
View 3 Replies View RelatedI can't compile using the instructions on the package... the package in question is this: [URL] ....
Just trying to play with old and good windowmaker. When running make it just says "make: nothing to be done for 'all'.
How do you compile a tar.gz source on slackware?I am asking because I am about to download and install Slackware(x64), and I have some drivers that it may not have (Ubuntu didn't have them) and TrueCrypt source.
View 9 Replies View RelatedHas anyone successfully compiled VLC 1.0.0-rcX (rc1, rc2 or rc3) from source on CentOS 5? I have a binary installation of VLC 0.9 but I would like VLC 1.0 as it has a new codec that I'd like to use. I've tried lots of ideas which I can post - I keep getting build errors due to wrong package versions - but I thought I'd ask to see if anybody has a HOWTO first.
View 5 Replies View RelatedI'm wanting to setup a emulation PC running Ubuntu (or Lubuntu). I've installed 10.10 and am wanting to compile MAME from the most recent source.
I am compiling apps from source. What packages do I need to install to be able to compile?
I have a linux source (linux-2.4.1) which is for intel. I am using powerpc compiler and I need to compile this linux source for powerpc. I did cross compilation, but it dint workout well. How to do it.
View 5 Replies View RelatedI downloaded wine from a windows laptop, but because you have to have a computer running Linux to download it as a .deb package, I had to download the source code as a tar. bz2.
Does anyone know how I compile it and make it executable?
I am trying to build a source rpm file through a source rpm package but while compiling I am getting the below errors as,
[root@nisserver tmp]# ls
gconfd-root mapping-root ssh-kvrIrp2633
keyring-fgwCIY nmap-5.21-1.src.rpm virtual-root.2hSYRa
keyring-vx1pvB orbit-root
[root@nisserver tmp]# rpmbuild --rebuild nmap-5.21-1.src.rpm
Installing nmap-5.21-1.src.rpm
warning: user fyodor does not exist - using root
warning: group fyodor does not exist - using root
warning: user fyodor does not exist - using root
warning: group fyodor does not exist - using root
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.49535 .....
RPM build errors:
user fyodor does not exist - using root
group fyodor does not exist - using root
user fyodor does not exist - using root
group fyodor does not exist - using root
Bad exit status from /var/tmp/rpm-tmp.73783 (%build)
What next step need to be taken to install the rpm file from the source file.
I would like to use tcc to compile source, but not assemble. Like GCC's option: -S. Is this possible?
View 1 Replies View RelatedWanted to switch to Kubuntu and decided a clean install was the way to go. Though the learning curve isn't too tough, I've hit a serious snag: When I try to compile a source package according to the similar instructions in each of the README files, I get the same error message;
Instructions:
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix` ..
make
su -c 'make install'
[Code].....
I'm liking this KDE 4.4 setup, but if I can't install the improvements from kde-look.org
trying to install the latest version of Minitube on my 64 bit Ubuntu 10.04 installation. I thought adding a PPA would let me upgrade from version 0.9 to the latest version but it didn't seem to work. So now I'm trying to install from source (I've never done this before so I'm a complete noob when it comes to compiling). I checked the install instructions in the source which reads:
Code:
# Build instructions
## Prerequisites
To compile Minitube you need Qt >= 4.5 installed.On a Debian or Ubuntu system just type:
sudo apt-get install build-essential qt4-dev-tools libphonon-dev
Windows and Mac users can get the Qt libraries from:
[URL]
Compiling on Linux is fairly easy. Just run:
qmake
and then
make
Beware of the Qt3 version of qmake! If things go wrong try running qmake-qt4 instead.
## Running
Just type:
./build/target/minitube
I installed the prerequisite packages,but just to be safe I wanted to run the ./configure command, but when I try to I get the "bash: ./configure: No such file or directory" message. Any idea what I'm doing wrong? Also, based on what I've read, I should have to enter some kind of install command in order to install the compiled binary but the instructions make no mention of this.
1. I was trying to compile a new version of blender from source.
2. It wasn't working. Apparently it is using python 3.2 now.
3. So I grabbed the source of python 3.2, compiled and installed. I think.
4. Still wouldn't compile. Couldn't find python 3.2.
5. So I went in to usr/share/python and changed debian-defaults to use 3.2 as the default.
6. To do that I made myself the owner of the usr directory
7. Now my system is buggered.
8. How do I restore roots privileges (if thats the problem)?
For sake of a clear picture of the problem, pretend I don't know anything about compiling.
How would I re-compile my current kernel's source? It's the i686 optimized kernel I selected from the install disc.
I have SUSE Linux 10.1 kernel 2.6.16.21.I copied the source RPM package for the broadcom netxtreme gigabit network adaptor and put it in the location /usr/src/linux as the instructions said. when I try to build it it is looking in the location 2.6.16.21-0.25-smp as you can see from the stdout shown below. So this version of the kernel is obviously 2.6.16.21-0.25-smp but I got the kernel source code for 2.6.16.21 from kernel.org. So the question is how to find the source code for 2.6.16.21-0.25-smp so that the driver will compile.---regards, WER
====================================Installing Source RPM Package=============================
walker:/usr/src/packages # rpmbuild -bb SPECS/tg3.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.64419
+ umask 022
+ cd /usr/src/packages/BUILD
[code].....
I've created a GUI for my voip software wherein i'm using the source code of linphone 3.3.2 for video and all protcol stuffs . It is like i've got my own gtk GUI instead of the linphone's glade . Hope you get the picture of what i'm doing . I would like to know how to compile the source code since because i do not know about make files and stuffs . Kindly help me solve this .
View 2 Replies View RelatedI hope I'm in the right section, if I'm not, please forgive me, I just installed Debian 5.0, and I want to install firefox, and then install graphics drivers, etc, I downloaded firefox, but I don't know how to compile programs from source, I googled how to compile firefox but the results are very vague and some are very outdated. I downloaded FF from their site, the file name is firefox-3.5.5.tar.bz2, how do I compile this?
View 11 Replies View RelatedI've taken the source code for Zlib1.2.3, built and installed in a 64 Bit linux machine. Then when i downloaded Python 2.5.4 source and tried to build(make), i got the following error
gcc -pthread -shared build/temp.linux-x86_64-2.5/opt/cinecert/Python-2.5.4/Modules/zlibmodule.o -L/usr/local/lib -lz -o build/lib.linux-x86_64-2.5/zlib.so /usr/bin/ld: /usr/local/lib/libz.a(adler32.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC /usr/local/lib/libz.a: could not read symbols: Bad value collect2: ld returned 1 exit status
So I am new to linux and i upgraded my kernel to 4.3.3 and to add the bfq patch. When i enter the command make install I get the following Code:
Select allupdate-initramfs: Generating /boot/initrd.img-4.3.3
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-1.fw for module r8169
[Code] ....
Now my ethernet drivers are not working.
I'm trying to compile the D-Link netcard driver from the official source, and when I first ran "make," I got an error that "make" couldn't be found. So I installed "apt-get install make," then make told me that it needed gcc, I installed "apt-get install gcc." Now make says: make: *** /lib/modules/2.6.32-5-amd64/build: No such file or directory. Stop. make: *** [LINUX] Error 2 and exits.
I suspect that I need to install some package group which will handle the make and make install (rather than manually trying to fix one hole after another)
why it is that when I download the sendmail debian source package for etch and build it using dpkg-buildpackage -b -nc I get a 645543 byte sendmail executable whereas when I download the sendmail binary that is 703292 bytes.
View 1 Replies View Related