I want to install OpenERP software which requires python 2.5 ,but my fedora 11 is having the python 2.6 installed by default, how can I downgrade the python 2.6 to 2.5 version. Also I need to know which version of yum is compatible with python 2.5 version.
View 3 RepliesI unfortunately succumbed to the lure of the latest and greatest and upgraded from a wonderfully stable, great version of Ubuntu 10.04 LTS to the -how shall I say- adventurous beta release of Ubuntu 11.04. My question is, I think, simple. Is it advisable to downgrade to the last 10.04 LTS ver.? I have my personal data saved. I run a dual boot with an old copy of Windows which I use once a year to do my taxes on.
View 8 Replies View Relatedin ubuntu 10.10, I have installed python 2.7. I would like to use apt-get to install packages to this version of python but I haven't been able to figure out howThings I have tried without success:changing the symlink at /usr/bin/python to point to /usr/bin/python2.7 - even after doing this apt-get still installs stuff to python2.6.Set up python2.7 as the primary alternative using update-alternatives - doesn't work
View 3 Replies View RelatedI enables some alpha repositories on my device(n900) and as expected, upgrades from there broke a lot of things. Now I disabled the repository but the newer versions of the packages are still installed. Is there a way to check for all packages, if the installed version is newer than the repository version? So that I can downgrade them? The package management is apt. The main problem is I don't exactly remember what I upgraded so manual (apt-get remove/ then install) downgrade is not much of an option. I think I changed some python libraries that broke my system.
View 2 Replies View RelatedI use openSUSE 11.4 64 bits with KDE. For a specific reason (incompatibility with our internal revenue website) I'll have to downgrade to the latest stable FireFox version, 3.6 or something. I however do not know how to :
1. find this repository
2. when found, install it over my current 4.0.1 version.
currently i am trying to downgrade my version of g++ compiler in my ubuntu 9.10using synaptic, deselecting current 4.4.1 version and adding desired 4.1.2 version will result in g++ not being recognized in terminal anymore :(also sudo apt-get g++will only get me the latest 4.4.1
View 1 Replies View Relatedi got per default python 2.6.2 on my fedora 12. how can i install the newest version python 3.1.2?
View 2 Replies View RelatedI need to know what version of python I am running. I am running ubuntu 10.04 and am going to be downloading wxpython but need to know what version of python I am running.In php there is a built in command phpinfo() that tells you everything you need to know about your installation of php, does python have something like this?Also, learned of python 2.7 today, I am currently learning python and am wondering if i should go ahead and upgrade or wait??
View 3 Replies View RelatedThis may sound a bit of an awkward question, but I have this app, Salome-Platform, [URL], It requires Python 2.5 at most to be able to run. (Compiling it is way to complex.) Since the Python of Slackware is 2.6, can it be downgraded to 2.5...? If it can, how do I do it...?
View 15 Replies View RelatedI need to add python2.6 to RHEL55/SL55 that is based on python2.4.3 to utilize the full functionality of another program. Since I already killed one system by replacing the default python version (previous tread), I asked developers how to safely enable already installed 2.6 without crashing the system. Here is the
You could install 'python26' from EPEL[1], presumably this does not break /usr/bin/python since it installs the new version as /usr/bin/python2.6.
I have debian SID,my repository has libapache2-mod-python version 3.3.1-9+b1 and python 2.6.6-6 No, i configured my apache and restarted my apache, but i saw following errors in the apache's log file:
[Sat Oct 30 15:14:06 2010] [error] python_init: Python version mismatch, expected '2.6.5+', found '2.6.6'.
[Sat Oct 30 15:14:06 2010] [error] python_init: Python executable found '/usr/bin/python'. [Sat Oct 30 15:14:06 2010] [error] python_init: Python path being used '/usr/lib/python2.6/:/usr/lib/python2.6/plat-linux2:/u
i can't downgrade my python and my libapache2-mod-python is last version.
Is it possible to downgrade to php 5.2 in Fedora 14?
View 2 Replies View RelatedI need to know how to make a program use a version of python older than the newest one. I am trying to run the Traipse fork of OpenRPG. Through their forums, I have learned that one of my problems is that I am running too new a version of python. I have python 2.7.1 installed.
I also have python2.6.6 installed, so I should be able to use that. My first thought was to uninstall 2.7.1 and just use the older version. The problem is that if i uninstall 2.7.1, it wants to also uninstall all the packages dependent on that program. Let's face it, in Natty Narwhal, that is pretty much everything.
Do you know how to force Traipse make it use the 2.6 version?
I upgraded my server machine to F12 without realising that postgresql gets upgraded to 8.4, and without realising that 8.4 can't work with 8.3 databases.
Is there a way to install postgresql 8.3 on F12, preferably from Fedora repositories?
Alternatively, is there a way to migrate an 8.3 database to 8.4? I know that the recommended approach is to dump and restore the DB, but now that I have upgraded to F12, the pg_dump command doesn't work anymore.
There is also this open-source tool called pg_migrator but I couldn't find a package for it and it requires a complicated compilation and installation procedure.
The simplest solution seems to me to remove pg 8.4 and install 8.3 on Fedora 12.
I need to downgrade the PHP on my Fedora 12 machine from 5.3.1 to 5.2...how do I do this?
ran 'yum downgrade php php-common php-cli' but can't get lower than 5.3.0.
how you change the default version of python in Lucid. Lucid comes packaged with 2.6 but we use 2.5 where I work. I didn't see much of anything on the web for this topic so figured I'd post something. If you are installing python2.5 on Lucid version 10.04 (comes package with 2.6 only)
View 1 Replies View RelatedI installed a newer version of python in /usr/local/bin/python2.6. Now I want to use that python and only that one. When I type "Which python", I want to see /usr/local/bin/python2.6, NOT /usr/bin/python, which is old one (2.4). Also, I want to see the same even after I reboot. How do I do that?
View 2 Replies View RelatedIs there any simpler method to downgrading to PostgreSQL 8.2.x? I am installing an application that requires it. I have removed postgresql 8.3 and tried to install some older fedora packages, but it did not go well.
My next step was to compile from scratch. However, I'm not real experienced with make/compiling and am fond of the organizational structure of RPMs.
The other option I could pursue is keeping 8.3 and installing an isolated 8.2 server for exclusive use by this app.
I'm attempting the lovely task of uninstalling Apache 2.2 and installing Apache 2.0 on CentOS 5. This is because of my original task of installing RSA web agent which only works with Apache 2.0. I also am not allowed to just install CentOS 4. I uninstalled Apache 2.2. Attempted to install Apache 2.0 (with rpm) and got multiple dependency errors. I installed the dependencies (and sometimes their dependencies including a little dance around some circular dependencies). Then I installed Apache 2.0 with no errors. However Apache failed to start.
Here is the error:
httpd: symbol lookup error: /usr/lib/libaprutil-0.so.0: undefined symbol: gdbm_errno.
Please don't tell me it "seems like you're missing your gdbm libraries." I'm not. I'm assuming I'm having a version incompatibility issue between gdbm and libaprutil. I just don't know what version of which I need to make Apache 2.0 happy. I tried uninstalling gdbm and installing an older version but I still have the same problem. Another option is to uninstall my openldap package (2.3.13-2) which I just installed and install an older version of that but again don't know which version is right.
When i try to run pitivi i get the following message and it closes down. "Install a version of the GStreamer Python bindings greater or equal to 0.10.19" without the quotes.What do I need to do? Where is the deb package for gstreamer needed?
View 9 Replies View RelatedI have a fedora 11 with kernel package: kernel-PAE-2.6.29.6-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (2.6.29.4....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
Fedora 12 officially uses Python 2.6, good. But the Google AppEngine still goes by Python 2.5 and is showing import errors while i try to start the SDK. Here is the stack trace.
[URL]
I have a doubt, may sound funny but wanna know whether it is possible to share DVD drive in windows [version 7] and use it in Linux system [version fedora 12]?
View 4 Replies View RelatedI want to be able to do
sudo ./program.py
instead of always having to do
sudo python program.py
What do I need to change?
I've already used line split stuff to transform my data into something like this in a text file:
Code:
['1', '1', '3', '20.7505207']
['2', '1', '3', '23.0488319']
['3', '1', '3', '-1.5768747']
['4', '1', '3', '-26.4772491']
[code]....
How can I get this on a python program so I can manipulate it as an array?
I have a server running Reh Hat Linux 7.3 with kernel 2.4.18. Can i upgrade kernel to version 2.6 and glibc to version 2.5?
View 6 Replies View RelatedI am using Nagios 3.2.4 monitoring tool on a Linux box with Fedora 10 installed on it and Apache version is 2.2.10. I would like to upgrade my Fedora version from 10 to latest version Fedora 13.
View 9 Replies View RelatedPython 3 want situation for python 2?Python 2 become stop?
View 1 Replies View Relatedyum dependency problem please? I am running Centos 5.5. I need to install python-devel, but when I do so I get:
[Code]....
I need to work on CUDA, nVidia's API for GPU development. The gcc version it requires is one step below what 9.10 provides, but it works on 9.04
I understand it ultimately comes down to installing the appropriate packages, changing symlinks of gcc and to point to the correct version.
So, is there an "official Ubuntu way" to do it? As in, is there some transitional or script that does it all?
(The reason I am asking this is, generally whenever I do something like this on my own, it ends up breaking something somewhere, but if there's an official way to do it, it plays well with the rest of the system.)