Fedora :: Data Recovery From Drive On Dead FC4 System
Jun 26, 2009
I have Fedora Core 4 PPTP server (poptop) that died (motherboard). I am setting up a replacement system but need to get the data off of the drive from the dead FC4 system. They are just plain text config files. So I removed the drive and mounted it to another system using a USB enclosure. But I can't mount of the root partition, only the boot partition. I have done some Googling and see that the reason is that the / partition is an LVM format. But of course the replacement system already has a /dev/logvol..... type of partition defined. So how can I mount the LVM partition from the dead system on the new system to get the data? Understanding this will be valuable for similar situations in the future.
Could I please have some recommendations for Data Recovery of a Formatted Drive. There are so many choices out there that I don't know which one I wanna use.
I'm running 10.04 LTS (64 bit) During a recent attempt at dual booting Windows 7, the Windows installer made a boot partition on the wrong drive, formatting the drive, and therefore destroying all my data.
The original partition was NTFS, and the new (unwanted partition) is NTFS.
Is there something in Linux I can do to recover the data that was there, or am I going to have to install Windows on yet another drive and use some Windows tools?
The data on this drive is extraordinarily important, containing ten years of digital photos, my source codes, and musical compositions (protools sessions etc).
The other day one of my hard drives on my windows system decided to stop working. Not entirely sure what happened, but it seemed that it just erased its partition header, although I wasn't able to recover it.
Anyway, I successfully got an image of the drive using GNU_ddrescue (yay!), and I'm currently salvaging what CAN be salvaged with foremost.
way to get EVERYTHING off of the drive? I mean, it seems that it's all intact (since foremost is finding so much stuff).
I've tried mounting the partition, but it's not working. (I'd post the output from the terminal, but the forum thinks there is/are URL(s) in it....)
I have an hp laptop with 2 hdd slots, both are sata. it came with a 320gb hdd with vista ultimate 64. i added another 320gb hard drive to my laptop and installed kubuntu on the second hard drive. Since vista was my primary hard drive, parts of grub were installed on it i.e. stage 1.5. And the rest was installed on the kubuntu hard drive. Because of that neither os would boot independently of one another.
I eventually got tired of kubuntu and in wanted to uninstall it. I formatted that disk. Now vista gave me grub errors, like I knew it would.I was going to fix the vista boot sector and mbr by running bootrec.exe off of the vista disc. But since I have an hp laptop, hp doesnt provide a recovery disc with just vista, it is an install of the factory image of the os plus software and therefore doesnt have the utilities I need to fix my problem.I ended up navigating to some sort of command line in the windows recovery environment and tried running it there, but no luck.
I tried navigating in the hp recovery environment, and accidently had vista start to reinstall itself on the drive, and actually I did that 3-4 times, each of which I stopped the recovery early on, within 30 seconds, but it had managed to mess up my partition table. I was wondering if there is some utilities in linux/ windows that will help me restore the partitions back the way they should be? I have done a data recovery with get data back for ntfs, and was pretty successful getting some stuff back, figures since the mft was screwed up.
So first of all I want to make an exact clone of the hard drive. Something like dd but just make an image file for now. Since there are no partitions on the drive I dont think I can use partimage, or drive image xml and I wonder if clonezilla will work. And I dont know how to test it without have to reload the image and wiping the drive in the process. I have imaged the drive with get data back but it does me no good cause I cannot restore that image back to the drive, or at least dont think I can.
Second I would like to see if I can recover the partition table , or mft that was over written. Here is a list of programs I can use for imaging or recovering. [URL]Third, since I have 2 320gb hard drives, one that is corrupted, and one that I took kubuntu off of and loaded vista with the recovery disks. Can I take the mbr, and partition table, or boot sector off of the working vista and move it to the broken 320 and fix it that way?
I accidentally formatted a 2TB drive of mine (big oops), but have recovered 2 of the 3 partitions using testdisk. My third partition is a LUKS encrypted partition. Testdisk managed to recover a piece of it, but it won't mount as most of it is unallocated. The partition originally occupied all space from sector 2,930,272,065 to the end of the disk -- sector 3,907,024,064. That is about 473 GBs. Currently, the partition only uses space from sector 2,930,272,065 to 2,930,288,129, about 7.84 MB.
The rest of the space is unallocated. Now what I need to do, is to expand the partition so that it occupies all the space that it used to. How would I do this? I cannot resize the partition, cause it would try to recreate the filesystem AFAIK and I don't want that, as it will fry my data. My data is not terribly important, but I would rather have it then not. I attached a screenie of kpartitionmanager. The partition in question is /dev/sdb2.
I accidentally formatted a HDD when I meant to format a USB thumb drive. The HDD is a 250GB drive that had about 180GB of data in the EXT3 format. I was actually attempting to make a bootable USB thumb drive with TRK (Trinity Rescue Kit). Kind of funny/ironic to mess up a drive while trying to make a rescue disk. Anyway, as soon as I realized what had happened, I pulled the drive out of the computer to make sure I didn't do anything else stupid to it. I have been searching for some way to recover and haven't really found much. There are a lot of programs to get Windows data back, but I haven't seen anything specific on the EXT3 file system.
I have lost the data of my drive having file system ext3, please tell me the most reliable softwares for data recovery, please try to tell also GUI software.
I have a fedora file server with a raid 1 array acting as a NAS for my local network. I accidentally overwritten a file that I need to recovery. What are my chances of recovering this file?
Yes thats right. Last night I changed my logon password for better security. (have a feeling my flatmate knows it). When I tried to log in today, it wouldn't accept my password. No I know that I got it correct. I know this for a fact. So after a few tries, I decided stuff this, I am going to reset it using recovery console. But the recovery console just hangs with the following on the screen:
[4.1098198] Console: switching to colour frame buffer device 100x30
I can ctrl+alt f2, and I just get a flashing cursor. So that's it then. My ubuntu box is hosed and I am about twenty minutes away from formatting and starting again. 6 months of schoolwork, designs for architectural competitions etc all gone.
It's my first time i switched to linux (fedora13) and i wanted to check out ubuntu10. Started installation but somehow (stupid!) selected not the right harddrive to install new system from an iso dvd. Well installation was not successfull, because not the right drive was selected.I came back to fedora but my "storage" harddrive that i had all my collected data and projects is lost. Basically it's like new formated and some files from the ubuntu 10 are on it. None of my files. Is there any way to recover it back? I don't even have a clue how do you install software to fedora13?(I'm a newbee that was sick and tired using and upgrading windows - so now mac OZ and linux)
I am student of MCS and working on final project. I am the user of windows xp. I am new in Linux. I am working on a project that titles "Hard disk data Recovery of ext2 and ext3 in linux". In windows, including dos.h and bios.h header files in program of c language I can send interrupt to bios and access most of the devices like parallel port, hard disks etc. But problem is that there is no bios.h and dos.h files in gcc. Now how can I access my hard drive using c program. How can I call int13h interrupt in linux or there is any other function in the linux to access the hard disk. In fact I want to access sectors of my hard disk using c language program. How can I do it?
i 've been using fedora 14,15 for like few months and i still have a 4GB NTFS partition win XP pro.i have installed fedora in about like 20gb for root and home ext4.i rarely use win xp nowadays (once in a week) considering i was using windows for like years.i have a commondata partition of about 130GB NTFS.i now dont want to use the windows and i want to convert the 130GB NTFS to ext4, but i am worried that if somehow at some point i crash my partition tables and i was using ext4 i wouldn't be able to recover the data as easily as i would in a windows.i want to know whether there is a reliable ext4 data recovery tool for fedora?igoogled and i found this link .. if any of you guys have used these tools can you share the experiences ?Mondo RescueTestDisk safecopy PhotoRecddrescue
I have a problem with the openoffice 3.1, install it and I worked fine in Fedora 14, but I restart the system and no longer works. nothing happens with any file.
to download from the official site and install it manually.
I'm having an issue with LVM on an external USB drive. When booting, the system drops into a recovery console if the external drive is not powered on because it cannot find the volume group and members. The setup is one system drive with fedora 12 installed, one internal data drive; LVM volume group vg1 with 5 partitions and one external backup drive LVM volume group vg2 with 5 partitions. Both the data drive and external backup are the same size and identical layout.
I use an rsync script that I wrote to execute backups (mirroring actually). fstab is set 'noauto' on the external partitions. I am new to LVM and I'm stumped as how to make the system 'ignore' the external drive at boot, if not powered on.
I am trying to create a RAID data drive for my system but I am having setting it up since I am a total linux noob.
The system has 3 physical HDD-s: 1. 320 GB (has functional Ubuntu 9.10 installation) attached to a PCI SATA card 2. 2TB on motherboard 3. 2TB on PCI SATA card
I want to create a software RAID1 of disks 2 and 3. So far I have used the Palimpsest Disk Utility: - Created a GUID Partition table on both disks (2, 3) - Used File -> New -> Software Array, made sure both my drives were included - Once Palimpsest listed the RAID Drive as a Software RAID Array, I told it to create Ext3 filesystem on it
Well.. at least thats what I thought I did. At this point I have been able to mount the RAID drive and put files on it. However when I look at its information in Palimpsest, I am told that the drive is not partitioned. Both RAId components /dev/sda1 and /dev/sdc1 are reported to be in Sync, but the RAID Drive's own state is 'Running, Resyncing @ 45%' (and lowly growing).
My questions are: Is this a normal setup or did I do something incorrectly? Why is the drive reporting to have no partition? And howcome I can use it if it does not have a partition? I have found the command line based configurations to be a tad too confusing to follow, so I have tried to stick to graphical tools - is this a hopeless cause in Ubuntu or is it possible to achieve what I want to do without command line? I will list some info on my disks below - perhaps this offers more insight to those of you more familiar with Linux.
Code: mindgamer@mind-server:~$ sudo lshw -C disk [sudo] password for mindgamer: *-disk:0 description: ATA Disk product: WDC WD3200BEVT-0 vendor: Western Digital
This community is very helpful to me.i have one external usb harddisk but its not getting detected any where.i have some important data.i want to recover that data.so could any one telme how to recover data from dead usb external hard drive.any help appreciated please helpme.no hardware is detecting but one small green light is coming.
I had a drive that kept kernel panic'ing so my data center recommended using the spare hard drive to reinstall OS on, and import the data from the old drive. (they checked the hardware, it wasn't the hardware) The new install is done, and I need to mount the old drive and get backups off it since my data center does not provide management whatsoever.
It's the same OS on both (Cent OS 5.4 32-bit) I'm an advanced user on windows, but linux gets me. I can ssh in, do basic stuff like setup IP ranges and restart services. I normally navigate the box through SFTP so I have a gui. WHM shows me my drives as such
Found Disk: hda Found Disk: sdb
so I'm assuming SDB is my old drive and the drive I need to access. I attempted to follow instructions on
Yesterday, my Windows 7 machine managed to somehow destroy a SD card with some pictures on it. Now, every time the card is inserted into a computer running windows, or the camera it came from, it asks to be reformatted. Obviously I would like to recover the pictures from the card.
I tried a scanning the card with a windows program "card recovery" and the program was able to scan the card and find the images on it. But I have to pay $40 to actually copy them from the card to the computer.
So I did some digging and tried to find a way to recover the data for free using my Ubuntu machine.
Some details about my hardware: Running Ubuntu 9.04 SD card: 8Gb SDHC from PNY Optima The camera was a Nikon D5000
What I have done so far: I used ddrescue to create an image of the card. However, at this point, most of the instructions I found only have you try and mount the image. Then I used the testdisk utility and the mmls utility from the SluethKit to try and find a partition on the SD card image that I could mount. Both of these programs failed to identify a partition on the card.
A friend's old Compaq Presario came with Windows XP. However, when it got buggy (without his knowledge or consent), his kids overwrote his OS by installing a warez edition of Windows 7 Ultimate. Unfortunately, that wiped out all his data, including photos of his late wife that he does not have backed up. I want to recover those if possible. I don't want to install anything because that may overwrite the photos if they're still there in some shape or form.
What I'm wondering is if there's a DVD-bootable distro of Linux specifically for data recovery. If I could boot to that, I could run its data recovery utilities without danger of putting anything on the hard drive. Once I've recovered the photos and backed them up to an external hard drive, I'm going to make his PC legal by installing Ubuntu. That's no problem. I'm very up to speed on that. What I need to learn is the best data recovery strategy via some type of bootable Linux. I suspect someone has written such a tool given how often people lose data due to viruses, accidental deletions, formats, etc.
I'm trying to recover my Western Digtal 500GB hd (connected through IDE), I've already succesfully recoverd 80GB with copyr.dma (didn't have a bigger IDE drive laying around). and want to do the rest of the drive with GNU ddrescue. I use the Parted Magic live cd to do this. The problem is that I can't find my HD, although it is listed when I look in the Hardware info app. How can I access it as /dev/hda or /dev/sda or whatever it wants?
While install Ubuntu on an existing xp pro I accidentally formatted my hard disk. Is there any way to get back my files it contains e books pdfs photos music files and movies. Data recovery. My Hard Disk 80GB SCSI NTFS.
My laptop died. I was running FC11. I have taken my harddrive out and connected it to an usb-adaptor and mounted it on my FC11 desktop. However, when I open it all I see is grub. Palimpsest sees both the 250MB of grub and efi etc., and it also sees 120GB of LVM2. I cannot however access any of my data.
A friend has a embedded system (korg recorder) with a ata drive in it, that crashed. We are trying to come up with ways to retrieve the data off of the drive. I'm asking in security as this seems like it would be close to forensics, hence security. Hints on software for linux to help either recover files, move files, copy/clone the drive? I'm not so concerned about the korg's os on the drive, as we can create a new blank drive and install that, its the data that is critical, that needs to be recovered. The original korg os was only recognizing drives up to 100gbs so I'm guessing this might be a fat16 filesystem if that helps. Well, that and the program installed to the drive to run it in the korg is an exe.
I have just upgraded my lenny box to squeeze. I did it by clean-installing squeeze. The installation was successful, but I just noticed that I had forgotten to backup some important files I had on this machine before the installation...
I just erased +200GB worth of photos, documents, music and videos on my external hard drive.I wanted to try the new Ubuntu Lucid Lynx Alpha 2, so I downloaded the .iso, launched the live USB disk creator and tried to format my 1GB pendrive to make room for the OS. Somehow, I ended formatting my 320GB external USB hard drive. The hard drive had to partitions (one EXT3 and one NTFS), but now it only has a FAT partition that spans the whole drive.I understand that the new FAT partition may have erased the EXT3 data structures at the beggining of the partition, making file recovery next to impossible.A confirmation dialog on the live USB disk creator wouldn't have hurted either.
A while ago my harddrive kinda failed. I didnt notice untill I got "Grub error 17" one time when I was trying to boot my computer. The problem is not really that I couldnt log on to my computer, but rather that I have alot of important information on the computer I would hate to lose. At the time I used Ubuntu 8.04 and had reiserfs filesystem on the computer. I bought a new computer and decided to wait untill I could rescue the data before doing to much dmg to it. But I dont really remember if I tried something to fix it before I realised that it was the harddrive and bad sectors that made me get gruberror 17. Hopefully I didnt do anything.
Anyway. Now today I had some extra time, so I decided to dive in. I booted from a linux mint disk and used ddrescue to transfer all the rawdata over the network to an image file laying on an ext4 drive. Once there I used reiserfsck to try and repair the filesystem. After that i mounted the image file and tried to access the files. Thats where the probelms started. I could see the whole treestructure of the harddrive and everything seemed ok, but when i tried to open the files, none of the pictures, documents and so on could be opend, and when I tried to open stuff like MP3 files they played quite strange. Videofiles was really messy, kept changing resolution and was almost always just gray and green squares on the screen. I decided to use ddrescue and move the files from the image file and on to a clean disk. So when I was done I could mount the filesystem on the new disk, but with the same resault, so I did reiserfsck again, and when that didnt help I did a buildtree also. Still with the same resault. So I decided to investigate the data abit. Opening files at random trying to understand what had hapend. And I saw that some MP3 files (the easiest to open) was some kind of mixing between several difrent mp3 files. Some files wasnt even in the same folder, so it was probably just that the file pointer was pointing at the wrong data on the disk. I dont know how that works really, so I dont know how to go on.
So now to the question. How do I get the data back? Have I done something wrong, can I redo somethig? I still have the broken disk and can take data from it once again, but I want to wait to do that untill I really know what to do. I also still have the image file, and the disk with the copied data. I have a ubuntu 9.10 system at my disposal atm.
I have somehow managed to eradicate all of my films and music...I was going to update my external HDD (typical) and so I highlighted everything and went to drag it. My finger kind of slipped while the cursor was in the the same folder and I got a message saying something like:"Source file is in this destination. Cannot move. Do what?"There's me thinking not much can go wrong at this point so I clicked "Skip all".Everything disappeared
The file system says there's still only 500GB free on my 1.5TB, so the files are there but I just can't see them.how I can get them back?There's nothing in my 'Deleted Items' and I had a play with scalpel and PhotoRec and I either couldn't get them to work or they said they'd take way more time than I have.
Edit: Where did that smiling devil come from? That's really not how I feel right now.
