Just did a fresh Debian 8 install from the net iso and used a usb stick.
Install went fine. I did not have internet at the time of install.
Now that I have internet (confirmed by pinging many internet sites) I get "403 Forbidden: request URL denied IP: 128.61.240.89 80" When ever I run apt-get update.
I have tried different sources in my sources.list
Debian 504 64bit
Gnome desktop
I can't download file on http://download.walware.de/eclipse-3.6/ Always complaining "404 - FORBIDDEN"
This is only a workstation. Apache is not running. No .htaccess file found for adding; Code: <IfModule mod_security.c> SecFilterEngine Off SecFilterScanPOST Off </IfModule>
I have a very strange problem; when trying to apt-get update or aptitude update I get time out errors. At first it was resolving ipv6 adresses:
Cannot initiate the connection to ftp.litnet.lt:80 (2001:778::87). - connect (101: Network is unreachable) [IP: 2001:778::87 80] Err [URL] Cannot initiate the connection to security.debian.org:80 (2001:a78:5:1:216:35ff:fe7f:6ceb). - connect (101: Network is
unreachable) [IP: 2001:a78:5:1:216:35ff:fe7f:6ceb 80] As my host does not have normal ipv6 support, i just tried to disable ipv6: echo net.ipv6.conf.all.disable_ipv6=1 > /etc/sysctl.d/disableipv6.conf
[Code]....
I'm installed CUPS:
1. apt-get install cups cups-client hplip
2. /etc/init.d/cups start
3. localhost:631
When I try to add "New Printer" I see the message on the screen:
Unable to add printer: Forbidden
In log file message:
failed to CreateProfile: org.freedesktop.DBus.Error.NoReply:Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost [CGI] CUPS-Get-Devices request failed with status 401: Forbidden
I am running a centOS server using ISPconfig 3.My web sites are not showing content only this phrase 403 Forbidden
You don't have permission to access / on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
I'm getting 403 Forbidden error when I hit [URL] I disabled SELinux after trying some options. I still get the forbidden error. I've tried [URL] and [URL] as well, with same results.
[Code]....
I am trying to get an internal webserver running and I am having issues with php. When I make a file (index.php) it runs perfectly. I can use PHP superglobals for the most part but the minute I use 'name' (ex: 'index.php?name=someone') I get a 403 forbidden. I thought for a while that it was something with all superglobals but if i change the code to use another variable it works fine.
works: ('index.php?person=fedora')
Code:
<?php
echo 'Hello ' . $_GET['person'] . '!';
?>
403 forbidden: ('index.php?name=fedora')
[Code]...
I have no idea if this is a apache issue, a php issue or something else random. I disabled SElinix in attempts to fix this, changed the owner and group to me and root and nothing seemed to have any effect. I also checked the document permissions in the httpd.conf and they all look correct.
I have the following message with apache:
Quote:
Forbidden
You don't have permission to access /site/home.html on this server.Apache/2.2.12 (Ubuntu) Server at localhost Port 80
home.html isn't in /var/www but in my /home/myname/site/ How can visualize my site in my local directory?
I'm attempting to use svn (client-side) on an Ubuntu 9.10 virtual machine and, although I am able to check out without issue, I seem unable to commit changes to the repository and get the error:
svn: Commit failed (details follow): svn: Server sent unexpected return value (403 Forbidden) in response to MKACTIVITY request for '/svn/rockoon_repos/!svn/act/8ed27527-fbfc-4dd5-b2aa-5a4d4b3e4e14'
I'm pretty sure this has something to do with the fact that the svn server uses ssl authentication (the server is running subversion+apache on a windows server box in case that matters).
The strange thing is that I am able to commit to the same repository on another computer using Tortise SVN (ie on Windows) without issue, so it seems that the issue must be client side (most resolutions I found for this issue online seemed to be server side fixes). I've also checked to make sure that I'm using "https" in the checkout URL.
I have al ready Fedora 11 [Leonidas], and when i did copy my old website to /var/www/html/wiki i had this problem trying [URL] : Forbidden You don't have permission to access /wiki/ on this server... i had to type this commands:
[Code]...
I have searched the forum high and low for the solution with no success, so I will now post this problem, with all known facts. Linux (and Fedora) is brand new to me so I'm somewhat illiterate with the language and recommendations from reading other threads. Please bare with me. I'm reading the book Beginning PHP and MySQL from Novice to Professional by Cristian Darie.The book has you create an Alias directory for creating the tshirtshop web-based application.
The book uses the directory /home/username/tshirtshop. However, I did not want this in the /home directory, so I created a new directory from the root directory /workspace/tshirtshop. Below are the areas of interest in the file httpd.conf (I restarted the httpd service each time I edited this file):
Code:
DocumentRoot "/var/www/html"
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
[Code]....
before i using fedora 14, i was used fedora 8.... no problem in setting web server, all client (windows XP) can access my resources in var/www/html/index.html but after upgrade to fedora 14.... this is a problem
"forbidden you don't have permission to access.... apache/2.2.16 (Fedora) server at 192.168.1.1 port 80" i had disable firewall also set SELinux to permissive
I have a web server set up, and for a while I just let it show the default "test" page, but now I am wanting to actually show something of my own.
I downloaded a couple templates from the internet (free ones), and copied the first one to the /var/www/html folder (including subfolders for ./images and such), and it used an index.php file, but when viewing in my browser, it showed the actual text of the file, not the graphics and images and stuff.
So I deleted those files and "installed" the second template, which uses an index.html file instead.
I am once again getting the default "Apache is running but not configured" page again, even though I have verified multiple times that the index.html file is located in /var/www/html
if I include the index.html file in the path to my website, I get a 403 Forbidden, so I'm thinking it has to do with file ownership or permissions.
I placed the files there as "root", and have tried several combinations of possible permissions (root:root is the owner:group) without any luck.
I am using the Desktop Version of Ubuntu Lucid Lynx, but I am posting here because I think all of you server guru's can help me. I am setting up my desktop as a mobile development server. I am hoping to eventually have it work with an intranet. Anyways I am trying to configure this and I hit a snag.
I have a 403 forbidden error. I've read around and I thought it might have something to do with SELinux
Here is my Virtualhost file
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
ServerName starace
DocumentRoot /home/chris/public_html
[Code]...
i have strange problem on my wordpress-powered blog.while i'm connecting to server by ssh or physical console, everything works fine.however, when i tries to logout almost immediately 403 forbidden error pops up on every pages of my website.if there are two or more connections (like physical console and ssh terminal), terminate one of them does not cause 403 forbidden. but it shows 403 forbidden error page right after i terminated all connections.i can find two types of error in apache error.log while it shows 403 forbidden page.
Code:
(13)Permission denied: access to / denied
Code:
(13)Permission denied: /home/user/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable(one strange part is my DocumentRoot is /home/user/www not /home/user)i gave 755 permission to all files and directories in DocumentRoot(which is /home/user/www), but still apache show me the forbidden error page right after logout.i use ubuntu 10.04 lts and i use apt-get command to install all package that i'm using now (apache,mysql,php,mrtg,snmpd,vsftpd,ssh,etc).these are my virtual host config file and apache2.conf. (httpd.conf is empty)
Code:
<VirtualHost *:80>
DocumentRoot /home/user/www/
<Directory /home/user/www/>
[code].....
Since I upgraded to 11.04 on my Server edition I have been experiencing some problems with my FTP-server and Apache. Apache just says that the page is "forbidden" if I'm not logged in on the server, which means I need to go to the server and physically log in or I can do it trough ssh but then when I close my ssh client on my work computer the page is "forbidden" again. And I cant seem to reach the FTP-server from an external address so I need to be in the network to access it.
It says something like:
Code:
An error occurred opening that folder on the FTP Server. Make sure you have permission to access that folder.
200 Switching to ASCII mode.
227 Entering Passive Mode (192,168,0,194,233,166)
Nagios - forbidden you dont have access to this server
I had made following changes on httpd.conf file:
ScriptAlias /nagios/cgi-bin/ "/usr/local/nagios/sbin/"
<Directory "/usr/local/nagios/sbin/">
AllowOverride AuthCongig
Options ExecCGI
Order allow,deny
Allow from all
</Directory>
Alias /nagios/ "/usr/local/nagios/share/"
<Directory "/usr/local/nagios/share/">
Options None
AllowOverride AuthCongig
Order allow,deny
Allow from all
</Directory>
I am trying to use yum command to install mysql and php but I get the following error
yum install php Loading "installonlyn" plugin Setting up Install Process Setting up repositories Could not retrieve mirrorlist [URL]...[Errno 14] HTTP Error 403: Forbidden Error: Cannot find a valid baseurl for repo: base
[code]...
I am trying to browse in /var/www/directory and it giving me a following error. Forbidden You don't have permission to access /directory/ on this server. Apache/2.2.14 (Ubuntu)Server at localhost Port 80 I have just copied that directory to /var/www. What might be wrong.
View 14 Replies View RelatedIf a root user set an environment variable for users, how to let users not modify or unset the variable?
View 4 Replies View RelatedI just upgraded to mediawiki-1.16.4-58.fc13.x86_64 on my fedora box and did:
Code:
Now I get 403 Forbidden message when I access.
I find several config files related to mediawiki, and modified them, but I still see 403.
the hard drive on my web server died so I replaced it and installed Fedora 15. I have been installing the OS on a small drive and then mounting other drive(s) for storage and did the same thing here. The problem is that I cannot get Apache to follow symlinks. Apache is partially working, it will serve my index.html page in the web page root directory and I made another directory called webtest and put some files in, and that worked fine. I made a symlink from the root directory to a folder on the mounted drive but when I try to access it, it gives me the old 403 Forbidden error. I also made a similar link in the webtest directory, I can view the other files in that directory but it does not show the link - also, trying to force it by typing the full path in the browser gives the same 403 error.
I have checked the permissions and SELinux types (using ls -Z) and they seem to be fine and I cannot find any .htaccess files. All the files on the mounted drive are owned by www:www but I also tried setting the user and group to www in httpd.conf and it still gave the same issue, so I changed them back to apache. I've been reading posts and sites on this for hours now and I'm still lost. I can post results of log files if they are of any use, I just wasn't sure what to post because it is somewhat working.
After finally getting Ubuntu 10.04 installed (with a few disasters along the way) I sought to recreate a shell script for backing up critical files that I had been using with 9.04. The destination for the files was /media/disk (with "disk" being the name that I had given to the USB flash drives in the past with 9.04.).
One drive mounted perfectly, and the shell script ran as it normally should. However, two other drives gave "file or directory not found" error messages and no files were copied. One of the drives lists its name as a very forbidding
"/media/5d588180-19eb-4656-8677-b652c4ed0003.
I attempted to re-name it to "disk", using e2label after un-mounting it, but that did not work? If I run the shell script on several different USB flash drives that I alternate, they must all have the same name.
Long story Short, I had to reinstall 9.10 (after a failed 10.04 upgrade) and therefore fresh install of everything.
I installed Apache2 as per [URL] and all works fine.
Changing the root in /etc/apache2/sites-available/default to a folder in my home directory /home/user/subfldr1/www results in a forbidden 403 error.
I've tried changing group owner, given 777 permissions, read and tried all sorts of solutions, but nothing seems to be working.
this costed me a whole day of trying and retrying. I set up a small home server with apache, php, and mysql.
System infos:
Linux 2.6.31-22-generic-pae
Ubuntu 9.10 Karmic Server edition
Apache/2.2.12 (Ubuntu)
Until now, it served happily a couple of sites, with no problems. But now, I wanted to set up my ftp server to point to the same directory as one of the sites, for me to be able to upload and manage files via ftp. As a server I normally use proftpd. With my usual config, proftpd runs with its own user and simulates the user ftpuser:ftpgroup when creating files. So I just changed all the files to be owned by this user and group. Permissions set to 770.
Everything works fine, and I'm able to access the data via ftp. BUT, when I try to browse my site the usual way (i.e. point firefox to its address) a 403 forbidden error is issued. Of course, you will say: you didn't allow access to apache. Well, I remembered that right away, and added the user www-data to the ftpgroup user. Now I espect apache to be able to read and serve the files.
Still same problem. 403. The apache error log is full with "permission denied" errors. After many attempts, I logged in as the user www-data, and tested access to the files. This way I'm able to cd into the directory, and read-write the files with nano. As a test, I tryed the other way around. Setting www-data:www-data as the owner of the files, and adding the ftpuser to the www-data group. This way apache works, but proftpd does not. Most probably it has something to do with a misunderstanding of groups permissions or the way this two deamons access the files.
I am still a newbie at Linux, but have managed to get about 6 different Kubuntu systems up and all running a localhost test web server. I always start out with a server .iso and after installing I add a kubuntu desktop GUI. I have an old laptop that was running 8.04 server w/xubuntu desktop gui and it was running my test web pages through localhost. I got a wild hair and thought it was about time to upgrade to 10.04 server. I always do a complete install and this time I tried lubuntu desktop GUI. I really like lubuntu but for some reason can not get localhost to run. I get a 402 forbidden error. same error with 127.0.0.1 Here is what I get when I run this command
[Code]...
I am trying to download all the Heroes graphic novels off the nbc site. Originally I was downloading them via the provided links but with ~170 pdfs to download it was going to take a while I used wget to start downloading them a bit faster, I tried the command
$wget -N -r -l inf -p -np -k -A '.pdf' url
in an attempt to download all the pdfs at once, I got an error message
--2011-04-01 13:17:14-- url
Resolving url... 92.122.49.98, 92.122.49.235
Connecting to url|92.122.49.98|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2011-04-01 13:17:15 ERROR 403: Forbidden.
Is this something I've done wring or something nbc have done to stop the use of wget?
I don't know is this the right place to ask, but i must ask some questions Here's my problem.I'm a student in highscool,and here we use Linux(ubuntu) OS .Every classroom has like 30 PC's connected with the main computer(the teacher's one) so....3 days ago we were forbidden access to some websites it says This domain is Blocked.By the way the Linux version installed is 7.04(feisty Fawn) i tried disable cookies that did not worked,also tried to whitelist some website,that also didn't worked out
View 7 Replies View RelatedI get "403 Forbidden You don't have permission to access" after attempting an installation of phpmyadmin.
CentOS 5.4
Permissions for directory set to 755 recursively (chomd -R 755 <directory name>)
Directory is in /var/www/html/
I have other test pages in the /var/www/html/ directory that I can access ... I know this seems like a permission issue and in fact the error log states this is a permission issue, but I cannot figure what is the problem here.
I am running a few virtual domains on Apache/Fedora 9. I have some domains working fine but when I tried to put up another one today I get "Directory index forbidden by Options directiveL : /home/jek/www/AAA/" Now here's the weird part. That message appeas in the error log for domain AAA, whereas the new domain is BBB and has it's own log files defined in httpd.conf. On the browser the Fedora test page is displayed. SELinux is turned off.
View 4 Replies View Related