I am using the screen app, and have set bce to on, and issued the following commands to set my background and foreground color: tput setab 4; clear; tput setaf 7; clear;
This temporarily sets everything properly on my screen. However, when I issue any commands that change or set their own background color (for example, when I issue an "ls" command with colorized output), the background color gets lost for any new output and I have to reissue the commands listed above in order to retrieve my background color.Ideally I'd like to keep my background color when issuing these commands, as it serves as a good way to remind me of what environment I am currently issuing commands in.
Just upgraded to Debian Jessie. I'm having a problem with the desktop and lockscreen that I never had before in Debian 7. Whenever I open the laptop to wake it up, there is very bad discoloration of the background. (screenshot : [URL] ..... )
Hardware is an IBM Lenovo T410 with no customizations. The graphics are factory nvidia. 3D acceleration works flawlessly, and I have no other issues except this background problem.
------------------------ HARDWARE
$ nvidia-detect Detected NVIDIA GPUs: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218M [NVS 3100M] [10de:0a6c] (rev a2) Your card is supported by the default drivers and legacy driver series 304.
I use a terminal with white text on black background (I just like it better), so I wrote the following line in my .vimrc file: set background=dark
However, gvim has black on white text. How do I do either of the following: Set the background of gvim to black Check in .vimrc if I'm using gvim I tried this: I started up gvim, and typed echo &term. The answer was "builtin_gui". So I wrote the following into .vimrc:
if &term == "builtin_gui" set background=light else set background=dark endif
I don't know much about scripting and so despite my best efforts i can't seem to get my script right and I was wondering how to do the following:at startup set the background color to a certain hex valueover time cycle through the entire range of possible values from (0x000000 to 0xFFFFFF)do this slowly, not abruptlystart the script every time I loginI know I need to use gconftool-2 -t str --set /desktop/gnome/background/primary_color "#$COLOR"where COLOR is a hex value variablebut really beyond that the specifics of how to time the updating of the hex value or whether a variable can be a hex value at all (if not how to work around that).
would anyone know how to change the widget plotter background color? I used to be able to do it in 9.10 by doing a right click/properties/advanced. In Lucid, I no longer see that advanced tab so I have no idea how to change that widget gray color? has this functionality moved somewhere else?? I looked all over the place in System Settings but I can't find anything.
I'm using xterm/screen/vim, and set them up to 256 color mode. Everything went well, except when background color for the theme I choose is not black.
Here's the theme I use in this example:[URL].. Here's the situation: as long as I only use vim, the background is well rendered, meaning everything is grey in vim background. But when I try this with screen, the background is back to black, and only the text get some kind of highlight with the background color.Here are the magical lines I added to screenrc:
Code: term screen-256color attrcolor b ".I" # Tell screen how to set colors. AB = background, AF=foreground termcapinfo xterm 'Co#256:AB=E[48;5;%dm:AF=E[38;5;%dm' # Erase background with current bg color. Not needed if TERM=screen-256color defbce "on"
Colors are well rendered in 256 color, I only have a problem with this background. Anyone knows how to 'fix' this?
I am using amd64 ubuntu 10.04. My problem is that whenever I change desktop backgrounds, after about 1 - 3 mins, the background just fades into the default color you pick for your desktop.
I know how to change the colors of the panels. But on the parts were the ubuntu symbol, the menus (Applications, Places, and Systems), the date and time, and the indicator applets is, they do not change at all. And pretty much the same problem on the bottom panel.
I tried Gnome color changer but only works for the texts and the drop down menus. I use Gnome classic (hated Unity). My goal is to make ALL of the panel background black.
I use ssh via KDE 4.4.3 konsole to connect to a 2.6.28-18-generic Ubuntu SMP machine,on which I use vim 7.2 and screen 4.00.03jw4. Within a screen session, the background color persists on the screen session even after closing vim. I dont know if this is a konsole or bash or screen or vim colorscheme problem.
I have 1000 jpg files in which all have a white background. Is is possible to change the white background color to red (for example) of all the files in order not to have to do it one by one ?
I would prefer to use Linux but I can handle Windows.
For example, change this Logo with white background to red background.
When I type (in new 10.10) soem cmdline comands like "ls -l" then some of the directories have a different fore-and background color (e.g. black on green) while the remaining other directoreis are blue on white.
Where can I find out the meaning of the diferent colors and how can I change them?
If I go to menu
Terminal->Edit->Profile Preferences->Color
then I can set only the full overall background and foreground color. But here only certain parts have a different color. the main color (black on white) is suitable. I do not use system theme.
I have Ubuntu Tweak installed but it only lets me change the login background to an image. Is it possible to use a color in hex?I am using Ubuntu 10.10.
I am using export in 'Inkscape' to convert an SVG file to PNG. As I am using a transparent background, the colour of background is automatically set to yellow. I want to change this default colour to white. How can I do this?
I'm using the shiki colors theme from the repos right now. "Shiki-Noble" to be specific. When typing something into Firefox's URL bar the internet addresses have got a dark font color and are hard to read on the dark background. Here's a screenshot: FF.jpg
I've had similar issues with other themes and Firefox's URL bar before.
Does anyone know what happened to the Multiseat feature that had been in the feature list at one point?To briefly summarise, a single machine with multiple graphics cards, sound cards, keyboards & mice provides multiple seats for users. Each user gets their own monitor, keyboard, mouse & perhaps audio. The rest of the machine resources are then shared.
The last I saw on the topic was this discussion, although I have a recollection that there was going to be support in a newer version of X.Org. I've googled around quite a bit, but can't seem to find anything.
Anybody know anything? It would be a great feature to have and it's frustrating to have had such an omission since F8 :-o
I have a file that will only work if you view it online. It will not work if i download it and then view it. I have no idea why. Right now I have to use Adobe Reader. Is there any alternative?
I want an image viewer to show the images in a directory in a random order. For that, I made the following script:
cd /home/DIRECTORY ls > files sort -R files cat files | gpicview
Everything looks fine, but gpicview doesn't open the images! I also tried it with pqiv but instead of just opening the images, it opens a dialog asking me which of the files I want to open.
Whenever I want to look at an image on the command line I use Kview, but what I want to use is the standard one you get when you click on an image file in windows mode. For me it's called visionneur d'image cos I'm using linux at my university in France.
I'm using squeeze and the xserver-xorg-core, kdebase and kdm packages with their dependencies in addition to the base system installation. I get glitches when I try to drag the icons on the panel: I can't move them properly and occasionally the whole screen gets redrawn (by this I mean it goes black and gets back several seconds later.) and gives an error with signal 11 (segmentation fault). The problem is not specific to my user account, because I tried it with a newly created user, and I didn't do any configuration on mine either. I also experienced other glitches, about which I made some screenshots: [URL]
I have a trackball with only two buttons. And I searched for a way to scroll (wheel simulation) with the trackball.
I already managed to emulate the wheel when holding a trackball button (eg, the right click). I succeed using xinput as described here. But clicking on the right button when rolling with the same hand is not very easy (indeed it is even difficult).
And since I have some media keys (XF86 on the far most left corner of my keyboard it could be very convenient if I can simulate the wheel using a key press.
Unfortunately the evdev option "Option "EmulateWheelButton" allows only to use a mouse button no key from keyboard.
So I found a way to map a keyboard key (in my case the "Audio Player Next Track" shortcut) to the right click using the three steps [URL]..... So pressing the key actually triggers a right click and this works very well ... with two exceptions .
The first one is that I don't know why but this completely disabled my numkeys (the numpad at the right end of the keyboard).
The keys control the mouse. After I checked under the "universal access" I saw that "Control the pointer using the keypad" option was checked. But this could not be a problem and I could be satisfied without the second problem..
Which is that my keyboard simulated right click do not actually enable the wheel emulation since the rightclick should be held down...
When pressing and holding down the real right button of the trackball it works. Even when holding the right click with a regular mouse.
But using my shortcut key I'm unable to generate a keydown event.
Is there a way to map the keyboard key and the mouse button like this :
a key press => a regular right click a key down => a held right click a key up => a right click release
i have a problem with both spotify and teamviewer. Both of them work just fine but when i close the main window they keep going in background (as they should) but, not showing any tray icon, if i want to close them i have to manually kill them in a terminal. For teamviewer there's an option to choose to completely close the program by closing the windows but i would like to have the possibility of having the app working in background with a tray icon!!!
Spotify gave me the same problem but i read on spotify community that is a bug of the current version. Still i'd like to solve the problem with teamviewer.I had a similar problem with skype and i solved getting a plugin from https://extensions.gnome.org/ but for teamviewer i don't see anything similar...
debian 8.2 jessie asus n53jl kernel 3.16.0-4-amd64