I want use HDMI for my TV mais there is no sound I think it s because :
:~# cat /proc/asound/cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe024000 irq 16
:~# lspci | grep -i audio
[code]....
HDA ATI HDMI is not in the list but i don t know why ! I installed catalyst driver Sound work on the jack slot mais not in hdmi Debian 5.0.7 - Linux 2.6.26-2-686 - Gnome
I'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
Here is the output of alsa-info.sh:
[url]
HDMI video out is fine, HDMI audio is a no go.
I'm on Jessie, and use KDE.
Sound keeps coming from laptop's speakers, even when HDMI is connected to an external TV.
I've tried to fix this issue using both Pulse Audio Volume Control and KDE's System Settings -> Multimedia -> Audio and Video Settings. No luck. I've read several topics around, but there are plenty of variables to consider.
I recently switched from a DVI cable to a HDMI cable (from the motherboard to the monitor) on my desktop. Everything was working flawlessly with the DVI cable, but when i switched to the HDMI cable the resolution became altered in a strange way. According to both the 'Monitor Preferences' and 'NVIDIA X Server Settings' my resolution is 1920x1080. Both the mouse and some icons looks to be in that resolution. However, the gnome panels, the rest of the icons, toolbars, etc. are huge and in a low resolution. While using Iceweasel, the top gnome panel and the Iceweasel toolbars take up half my screen! I can't find a way to alter the size of these since my resolution is set to maximum. I thought it might be a problem with gnome, so I tried Fluxbox, but the same problems were there. Have anybody else come across this, or perhaps know of a solution?
[Code]...
I would like my laptop to automatically switch to HDMI (both video and audio) when I plug a HDMI cable in. Running Jessie with Xfce, and I hear that KDE already does this...? I would prefer to stay with Xfce though, and have tried making a UDEV rule and script, taken from the last part of this thread: [URL] ....
At first it worked perfectly, but now for some reason, only Chromium gets resized when I plug/unplug the cable. HDMI output is correctly activated upon cable insertion, but when taking the cable out again, the desktop resolution remains the same (larger than my laptop resolution), so the panels etc. are invisible.
I have Debian WHeezy 7.7 KDE, card Radeon 5000 series. Card has HDMI, video on HDMI working, but sound not working. System see sound device, but if I select this and try to play music then no sound. I tried many things. Below is some lists.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
[Code] ....
Where the script is for Gnome 3. When I plug the HDMI cable, the desktop expands to include both, but disables the backlight on the laptop monitor. I have to restart gdm3 or the laptop for the brightness control to bring it back up. First, why would it turn brightness to 0, and how do I change the default of that so it stops. I plug and unplug the HDMI regualarly while I wait for a new desktop and the laptop has to pull double duty.
I just switched from Ubuntu 14.10. It never blacked out a screen on plug in or removing. That means that there must be some way to do it, however, it used Unity and this is Gnome 3.
I installed KDE. It works as well. I will use it for now, but would like to get Gnome 3 to work. My default is gdm but I think I saw I can switch it to kdm.
I am trying to get audio to play in tv/monitor via HDMI cable. It seems ALSA does not recognize my nVidia audio device and can only use the onboard audio device. Here's some relevant info I have collected:
[Code]...
I just got a new Dell monitor (U2715H), and even with beta Nvidia driver (355.06) on Debian testing x86_64, it doesn't detect highest resolution (2560x1440) when connected over HDMI to Nvidia Geforce GT 620. I have an HDMI 2.0 compliant cable, and according to Dell reps, the monitor should support 2560x1440 over HDMI.
Some suggested using xrandr to set the video mode explicitly. I tried doing it, and first got a EDID file with nvidia-settings, and run edid-decode. Where is what I got there:
Code: Select allDetailed mode: Clock 241.500 MHz, 597 mm x 336 mm
2560 2608 2640 2720 hborder 0
1440 1443 1448 1481 vborder 0
+hsync -vsync
So I used those values to make a new mode in xrandr:
Code: Select allxrandr --newmode "2560x1440_60.00" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync
xrandr --addmode HDMI-0 "2560x1440_60.00"
But I got this error:
Code: Select allX Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 31
Current serial number in output stream: 32
I have recently acquired a Lenovo Q150 machine and attempting to use it as a HTPC. I've been reading that with this platform a newer kernel is required to make wireless, sound and a few other tweaks work correctly--so I bumped up to testing repositories to upgrade to the 2.6.38 kernel.[URL]...
The audio on this device has been more than a pain. I'm currently using XBMC to play media on this device and after setting the outputs to custom: plughw:1,9 sound is played correctly. I found this out by using alsamixer, selecting the sound card with the F6 key (Nvidia 1) unmutting all outputs, quiting, and running speaker-test -D plughw:1,X where X is the sub-device from the output of aplay -l until sound could be heard from the receiver.
Now my problem is that applications like mplayer, and iceweasel won't output any sound. I'd prefer not to use the optical out on the device and would like to send sound over HDMI. Has anyone had any luck getting it to work as it should?
I've also installed pulseaudio, not too sure if this is really needed. I've also used module assistant before upgrading to compile alsa from source, it worked but i just decided to upgrade the kernel instead of dealing with m-a every time an update comes through. Linux floppy 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux
apt-cache policy alsa-base
alsa-base:
Installed: 1.0.23+dfsg-2
Candidate: 1.0.23+dfsg-3
[Code]...
I realise this is an issue that has been covered a lot, one way or another, but at least from what I've been able to find, most of the discussion centres around getting HDMI audio to work. However, I have problems even getting the video to work from my laptop's HDMI output.
I have an HP dv6z-se, with an ATI Mobility Radeon HD 6550 (1 Gb) video card and using F14/KDE. My problem is that when I go to System Settings/Display/Monitor, Fedora doesn't actually seem to realise my computer even has an HDMI output and only displays options for VGA and my integrated screen.
When I plug it into my LCD screen, sometimes I get a 'No Signal' message and sometimes I get garbled static and a message about unrecognised input and the frequency it's coming at.
I read elsewhere in the forum that someone was able to get video working by editing their xorg.conf file, so I went in and tried to see if I could replicate that, but none of the files in my xorg.conf.d folder had anything related to video outputs (as far as I can tell at this point).
Configure HDMI Sound on Acer N282.
No sound HDMI.
ALSA information is located at [url]
My hdmi out is not showing on tv, what should I do ?
sony vaio VGN-FW51MF
ATI mobility radeon HD 4650
I have an HP 8510w laptop and I run ubuntu 10.04 out of an external harddrive.
I have no problem getting video over hdmi using the latest proprietary nvidia drivers however I cannot get sound through the HDMI cable.
I have read around without being able to find a solution.
Running "aplay -l" shows only my intel sound card and also there is no hdmi sound interface in the sound preferences (Only the normal output interface).
I am using the latest proprietary nvidia drivers (Believe it to be 1.95) and the graphics card is a Quadro FX 570.
how I can get sound out to work via the hdmi cable?
I have recently installed Ubuntu 10.10. Everything is working fine except I have no sound. When I use the command 'aplay -D hw:0,0 somefile.wav', I can get sound through headphones attached to the headphone jack. But I can't get any sound through the speakers. This is a dual boot desktop and the sound works fine under Windows, so no problems with hardware. The PC monitor is connected through a hdmi cable and I would need sound through the speakers. The output of alsa-info.sh is at
HTML Code:
<a href="http://www.alsa-project.org/db/?f=cb172534097c313b25836f77f2a40fef857102ba">alsa-info.sh output file.</a>
I have an ECS gf7100pvt-m3 that has the Nvidia MCP73 chipset that supports HDMI out. Unfortunately the MB only has a DVI connector which from what I have read is supposed to cross wire the audio to the correct pins on the HDMI (have a ticket in with ECS to see if like ATI there is a special adapter).
I have tried every thing but only Analog audio is working.
I've tried listed on these links to no avail:
[url]
[url]
[url]
[url]
The only error is the at the Aumix isn't touching....I can select HDMI or IEC958 1 etc etc and the audio mixer shows full blue as if it should be working but I can't get VLC or MythTV to output sound.
I have a packard bell dot mu laptop which I have installed Ubuntu 10.10 on to.
Everything works fine except for the HDMI out to my tv, in windows it worked perfectly, in ubuntu however when I plug the TV in it, absolutely nothing happens it doesn't seem to recognise it at all.
I have tried to reboot whilst still plugged in, the loading screen then appeared on the tv, but when it got in to Ubuntu, it showed up on the laptop and tv was just flickering black.
What are some good VGA to HDMI converters that work well with linux? Any suggestions? I don't know the resolution I'm working with just yet, but it appears to be a 42" hd lcd tv/monitor. I think there's a VGA port on the back, but I'd rather route the signal through HDMI for better resolution.
View 2 Replies View RelatedI have been trying for a while now to get the audio over HDMI working from my PNY G210 graphics card and mythtv but with no luck.
I have followed this guide [URL]
prior to following this I only had my motherboards on board audio showing up but I am now at the stage that I can see the HDMI audio and select it and un mute it but still cannot get any sound out of it.
As a side effect after following the steps from the link above, now every time I boot the computer up my on board audio is muted so I need to un mute it from sound preferences.
This is my audio config as it stands:
scott@MythtvFrontend:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
[Code].....
The mother board is a an ASUS MN32-SLI deluxe and I have 2 graphics cards in it, a 9600GT to run the 2 monitors connected and a G210 which I would like to use to connect to my TV using the HDMI output. At the moment I am using the VGA output from the G210 to the TV and a separate audio out from the computer which was working fine but the audio is now always muted on startup.
I don't think it is an issue with my mythtv settings as I cannot get any audio over the HDMI using speaker-test (on board analogue audio works ok).
I recently purchased a new video card a GeForce 550 Ti, but I haven't been able to get sound working over HDMI.
I'm running the latest version of Ubuntu (11.04) and have installed the proprietary drivers through Additional Drivers.
Code:
The card is being picked up by alsa and I've configured Ubuntu to use HDMI in sound preferences:
aplay -l:
Code:
When I check alsamixer this is what I see:
ALSA reports that version 1.0.23 is installed, although I thought 11.04 came with version 1.0.24?
cat /proc/asound/version:
Code:
I've tried purging ALSA and reinstalling it but it didn't help. Is there anything I can do? Does anyone know if this card is supported by ALSA properly yet? I hate the thought of having to go to Windows to get this working
i have just recently switched back to Ubuntu and im trying to run my sound through my tv which is connected through my computer using a hdmi cable thats plugged into my EVGA Nvidia GeForce 210 video card ... i have my computer monitor set up as my main screen but i have my tv set up as separate X screen so i can drag over a movie and watch it on the big tv screen and still do things on my monitor ... when i was running windows i was able to get the sound to play through my tv just as i am tryin to do now... does anyone know how i can do this on Ubuntu 10.04
View 9 Replies View RelatedAfter upgrading to 11.04 I noticed that HDMI audio stopped working. When I connect the HDMI cable to the TV the image is transfered but there is not sound.I tried several things, starting with checking the sound preferences. I have there two devices, one for internal audio and another for HDMI. When I select the HDMI output I have no sound. I tried to run gnome-alsamixer and it shows two devices as well, but for the HDMI it gives me no parameter at all there.Device configuration seems ok and aplay -l gives me the follwoing info:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I also tried some troubleshooting pages like this but couldn't solve the problem (in fact when trying one of the suggestions of this page it messed up the whole sound configuration of my laptop and had to reinstall alsa driver modules as explained here to come back to the previous state with only the HDMI problem).What makes me really upset is that with the previous Ubuntu version (10.10) HDMI audio worked just fine then after upgrading to 11.04 it stopped working.
Another interesting thing about this problem is that when I play a video from a web page, for example from ....., and try to use HDMI audio, the video runs much faster than normal with no sound. If I switch to internal audio, while still sending the video over HDMI, it works fine with the audio playing in the laptop and the video in my TV.
i want to connect my laptop to the lcd using hdmiI have nvidia video card 9200 gs and the driver is installedafter connecting both together nothing happens!do i have to change anything in the system or display settings?
View 8 Replies View RelatedI am having trouble getting sound over hdmi with my Nvidia MCP7A HDMI. The strange thing is that everything works fine in a Live disc, but once I do a fresh install of that Live disc I get no sound, even though my configuration is exactly the same (as far as I can tell). I've checked the little things like alsamixer volumes, aplay -l, etc etc. Everything looks good to me. I can reproduce on multiple TVs so its not the receiver. Video drivers are the same in both live version and installed. aplay -l detects my device. sound/pci/hda/patch_nvhdmi.c already has my correct vendor id in it. Perhaps the following info can figure out what my installed environment is lacking.
Live Disc Info
Hardware
I work at a television station and we recently purchased a System76 Meerkat ION with the intended purpose of using the HDMI out port for broadcast purposes. We have an existing AJA HA5 box which is capable of converting HDMI to HD-SDI (HD-SDI being the baseband standard in professional broadcasting).
The converter is only willing to accept the following values:
1920 x 1080 @ 29.97
1280 x 720 @ 59.94
I am wondering if it is possible to manually configure Xorg.conf (or whatever file is being edited by NVIDIA X Server Settings) to tell the HDMI output to only produce the latter resolution (1280 x 720).
I'm able to get HDMI audio/video perfectly when I'm playing a dvd on mythbuntu. However, If I try to play the ripped version or any other video that is on the hard drive, I get no Audio?
I've checked alsamixer to make sure the device isn't muted.
If I use vlc media player I don't have any audio either. Is there a way to enable hdmi audio as default?
I can't get HDMI sound reliably when using Ubuntu. The strange thing is, if I repeatedly reboot the computer, eventually the sound will work. This can take anything up to 10 reboots. Once working, it will keep on working as long as the machine is not rebooted or shut down. HDMI sound works fine under Windows.
aplay -l will only list the Intel (analogue and S/PDIF) hardware, not the Nvidia, even when it is working. Selecting between analogue and digital output under Sound Preferences has no effect on the HDMI either way.
I'm running a clean install of 9.10 on a crispy new pc (Packard Bell I-extreme) I've connected my pc via HDMI to my Samsung 5 LCD tv (source is marked/named 'pc') by means of an NVIDIA.The problem is that the x screen is too large for my tv. I see the 'working area' but the top and bottom taskbar fall of the screen.The current settings (which I of course double checked) worked when the pc was connected to the lcd via VGA cable. X Server settings and TV resolution are set to the same values...(1920x1080)
View 7 Replies View Relatedim running ubutu 9.10 with the standard nvida proprietry drivers as a media center. the output is over hdmi, through a a/v reciver and onto a lcd television. my proble mis that the output is too large for the screen even whan outputting at a smaller resoultion than the native resolution of the television. this means that the top, bottom, left and right of the output is chopped off. in windows i can adjust the size of the output useing some sliders to get the image to fit the screen. however these are only available in the windows drivers and i cannot find a substitute in the ubuntu ones. one way of doing it may be to output black bard at the sides of the screen but i have no idea how to do this.
View 2 Replies View Related