Debian Multimedia :: Installing Real Firefox On LXDE
Feb 11, 2014
I am using Wheezy LXDE amd64 and I want to remove Iceweasel and install the real Firefox. Now according to this page - URL... Firefox is only there for Ubuntu and Opensuse officially by Mozilla. But since Ubuntu is based on Debian will the firefox for Ubuntu work for Debian ?Also since I am completely new to Linux I need to know how to do the following -:
How to check the dependencies given on URL.... and if necessary update them. For example what are the commands for checking if I have GTK+2.18 or higher and if necessary update that.after extracting Firefox do I need to create any symbolic links ? If so what are they ?Can I install plugins like Adobe Flash Player and update Firefox easily ?
View 14 Replies
ADVERTISEMENT
Mar 19, 2010
i have Debian 5 with LXDE installed on my desktop computer. i have everything set up, but i can't figure out how to change the GTK theme.
View 1 Replies
View Related
Dec 12, 2010
I'm using Firefox 4.0 b7, and tried to install Mozilla binary on Debian 64 bit. Since it was built for 32 bit (x86), I needed to install also ia32-libs-gtk package. This at least enabled Firefox to start, but still it has UI problems, because it accesses current theme binary from /usr/lib/gtk-2.0/2.10.0/engines/ which are obviously compiled for 64 bits. This causes some UI to be degraded to generic GTK. Is there a normal way to solve this?
I my case I got a whole bunch of errors like this (using Nimbus theme, in case of Clearlooks errors are of the similar nature) Plus there are some plugins errors too, which are a second issue: Gtk-Message: Failed to load module "canberra-gtk-module": /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so: wrong ELF class: ELFCLASS64
(firefox-bin:10197): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libnimbus.so: wrong ELF class: ELFCLASS64
(firefox-bin:10197): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libnimbus.so: wrong ELF class: ELFCLASS64
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
[Code]....
View 10 Replies
View Related
Aug 12, 2011
Debian 6 ("Squeeze") uses a rebranded version of Firefox called Iceweasel. It however lacks plugin support, most of my favorites don't work.So what is best way to install the "real" Firefox on Debian?
View 2 Replies
View Related
May 26, 2010
What is the best way to install a plugin capable of playing real videos for Debian Linux? In particular I want this web page to run correctly under Iceweasel and Chrome:
[URL]
View 1 Replies
View Related
Feb 24, 2011
install the latest real-time kernal into my current Lucid 10.04 distro? I know I could download and use Ubuntu Studio, but 1.7Gb is too much for my monthly download allowance to handle, especially when all I need it for is to address the major latency issues I have with Audacity.
View 5 Replies
View Related
Aug 15, 2010
I'm using 32 bit (i686) Debian Lenny. The multimedia repo is installed, w32codecs is installed, VLC and Kaffeine are both installed. I was trying to listen to some audio files on the NPR site (link will follow) and find that I can't open the files with anything I have installed. The Linux version of the Realplayer isn't in the repo (and I don't really want to install it after some of the things I've read about it) but I gotta have my NPR and there's no way I'll EVER go back to a M$ OS. How can I listen to these files without downloading them and then uploading them to a media conversion site? I'm usually very good with google but this one has me stumped.
View 11 Replies
View Related
Jan 6, 2015
I installed debian 7 lxde from lxde cd. It freezes on logging in (i.e keyboard doesn't work,desktop freezes and only mouse pointer works.But,I can't select or view anything.Only mouse pointer can be moved.).
But,If I do not login with the display manager and login (my username and not root) via another terminal like tty3 or tty4 using alt+ctrl+F3 or F4,everything works fine.
View 2 Replies
View Related
Mar 27, 2010
I am testing LXDE on my test-laptop and it looks quite nice and fast. I am thinking of switching DE from Gnome.
My question: are there features in Gnome that are missing in LXDE? I can not think of any, so far. The only thing I miss so far is a possibility to edit the menu, as the menu is huge
View 11 Replies
View Related
Nov 13, 2010
I have issue with cpufreq frontend in LXDE, I cant change governor. I am in powerdev group. Maybe I dont have permission to change governor with this plugin. I am using Debian Squeeze. Please what can I do, I can change the gowernor: cpufreq-set -g ... , but I want to do that like normal user in cpufreq frontend in LXDE.
View 3 Replies
View Related
Jan 26, 2011
1.) Which is the the best open source remote desktop server which you recommend for Debian? And client for windows/linux platform.
2.) How to install LXDE + xserver and point 1. question remote server program through SSH?
P.S. I all ready did install of LXDE and xserver, but I don`t know how to test it, because I`m using ssh.
View 1 Replies
View Related
Apr 27, 2015
I've been using debian for well over a year, previously with the gnome desktop. I never really liked how much memory and CPU it used, but many things like the hotkeys worked out of the box, and it was relatively easy to configure. After upgrading to Jessie I decided I'd give LXDE a go given it was lightweight and seemed more complete than e17.
However, after over a day struggling to get everything to work just right, I am still unable to use use my hotkeys (volume control, brightness control, etc.). The volume can be controlled through the GUI, but the brightness seems to have no control whatsoever. In any event, I installed the drivers and firmware for the hardware and used the instructions in the link to try and configure the key bindings, but nothing has worked: [URL] ....
:Questions#Change_hotkeys I'm not sure what to do now.
View 14 Replies
View Related
May 2, 2015
I saw that on every computer in which I installed LXDE on Debian 8 (the problem was not existing on Debian 7.8.0)
So I decided to use mate-desktop-environment but a brand new problem (always ) made his apparition when I try to use tightvncserver on a Mate desktop (no task bar, and memory growing GB after GB up to the memory explosion after 1 or 2 minutes with 16GB RAM -I will post another subject for that once I will know more things about it - since it is, after all, an huge problem causing the computer to crash if "reboot" our "vncserver -kill :1" is not quickly done)
But here talking about LXDE taskbar: others LXDE users, do you have this problem with the icons ?
View 2 Replies
View Related
Jul 16, 2015
LXDE my desktop environment in Jessie.
Libreoffice is the program for default to open a file texts.
Evince: not open PDF
Image Viewer: not open photos.
How to change file association for leafpad, libreoffice and evince from console??
Where is the file configuration to association of program in LXDE??
View 4 Replies
View Related
Apr 17, 2016
I managed to install Jessie on my new Lenovo Ideapad 100 and have been trying to put the finishing touches on it. I downloaded FDPowermonitor and the icon showed up right away. Then after a few minutes it went away and hasn't shown back up.
I think I need to modify /etc/xdg/lxsession/LXDE/autostart to include @fdpowermon but I cannot figure out how to have the permission and use a editor I understand.
I just log into LXDE with root... but there has got to be a better way yes? But that didn't work anyway...
View 2 Replies
View Related
Feb 20, 2010
Env: Lenny LXDE
[Question]
By (first step) doing: pcmanfm --set-wallpaper /point-to-new-wallpaper, it change the configuration to the new wallpaper, then, my question is: What is the most correct way to "refresh the desktop screen" (by command line) so that the new wallpaper is then displayed.
And by (second step) doing: lxsession-logout, and choosing 'Logout', the new wallpaper is displayed after the new login. No problem here. Is there a (most correct) way to completely change the picture and activate it by command line (without user intervention)?
View 2 Replies
View Related
Feb 11, 2015
I use the debootstrap to make a base Debian System of the ARM architecture for BananaPro [URL]... , and install the LXDE desktop. But the keyboard and mouse didn't response after the LXDE boot.
If I use the Debian system without the LXDE desktop, and it is normal. Meanwhile, I only installed the framebuffer driver, and can't find the right GPU driver to install.
Is caused by the lack of the GPU driver ? and what should i do ?
I get some error logs from /var/log/Xorg.0.log file,as follows:
Code: Select all[ 17.206] (II) Module shadow: vendor="X.Org Foundation"
[ 17.206] compiled for 1.12.4, module version = 1.1.0
[ 17.206] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.206] (==) Depth 24 pixmap format is 32 bpp
[ 17.207] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 17.211] (==) FBDEV(0): Backing store disabled
[ 17.212] (==) FBDEV(0): DPMS enabled
[Code] ....
View 0 Replies
View Related
May 19, 2015
I know the problem has been partly solved in this old thread [URL] .....
Now we have Jessie as stable, yet LXDE doesn't shutdown properly:
On the same computers, Wheezy LXDE shut down very fast
I installed Jessie from the netinstall image.
On a 2007 computer, it's like the old days with a Pentium II running some version of Puppy Linux or Slitaz. The system shuts down after a while but the computer remains on.
On a 2013 laptop, I added the line init=/bin/systemd in the Grub default file as advised on the old thread above. The laptop shuts down after a while, the system first, then the hard disk goes to sleep, then all the leds are off.
If I run the magic command, the computer shutdowns in a breeze, perhaps even quicker than good old Wheezy:
Code: Select all# systemctl poweroff
Now, is this still a systemd bug? Doesn't look like it since the systemctl command works. Is it an LXDE bug? Looks like it in a way - if the LXDE shutdown button enabled the systemctl poweroff command, I suppose the button would work?
Is there a way to make the LXDE shutdown button run the systemctl poweroff command?
I'm glad Wheezy is still with us because I wouldn't install Jessie for newbies — they'd think shutdown (through clicking on a button) is even worse than in Windows.
View 2 Replies
View Related
Jun 6, 2015
I have installed the LXDE desktop on my Debian Testing setup (It also has XFCE desktop installed). On the LXDE desktop I am trying to increase the virtual desktops from 2 to 4 desktops but every time I right click on the desktop pager icon on the task bar and then click on Desktop Pager Setting (from the menu that appears), nothing happens I don't get any configuration window for the desktop pager. AM I missing something from my install of LXDE??
View 3 Replies
View Related
Jan 31, 2016
Installed Debian 8 Lxde desktop yesterday. All worked fine post install. Executed following two commands to make system up to date:-
Code: Select allapt-get update and Code: Select allapt-get upgrade
Switched off my system after using it for close to 3 hours. Today I booted my system and I could not see any GUI in action except mouse pointer. What I can only see is clicked on my camera and posted below for your review.When I get the login screen, I can choose different DE (fluxbox) and I was able to login and do some action. I don't know the reason for this sudden disappearance of desktop.
View 7 Replies
View Related
Sep 21, 2010
What is the rigth way to intall n configure it with LXDE desktop? i has been search in this forum and it's pointing to GNOME..i also already google about this.. i see many tutorial about compiz with ubuntu gnome distro..i'm now using LXDE the vise-versa to the tutorial.
View 1 Replies
View Related
Aug 1, 2011
The first issue is adding launch icons to the task bar. I can add launchers, but cannot figure out how to link them to applications. It is only half a problem, because putting links on the desktop is easy, but I prefer having launchers on the task bar so the desktop is not cluttered.The big problem is placement of desktop icons. I like to put icons on the right side of the screen, and more importantly, I like to group related icons. For example, if I had a folder or document for Linux and another for Debian, I want them grouped together. I also like arranging by category: folders in one column, documents and images in another and launchers (if any) in a third. However, if there is way to enable desktop icons to be moved, I cannot figure it out. Icons are fixed on the left side of the screen with folders first in alphabetical order, then documents/images in alphabetical or numerical order, and launch icons last.My guess is icons can be moved, but I am not computer literate enough to figure it out. It does not make sense that the task bar can be placed on the top, bottom, left or right, but desktop icons cannot be moved. I have tried every preference setting, but there are no relevant options.Am I over-looking something that is not obvious or is it a strange deficiency with LXDE?
View 3 Replies
View Related
Sep 11, 2011
I am trying to configure my test Squeze install on an older PC with LXDE desktop, and I can't seem to find anything which would enable me to mount a floppy.Then I tried to use the konsole as root mount -w /dev/fd0 /media/floppy0
But although this device and this mount point exist, nothing is mounted. I double checked with various floppies which I know have data on them and none of them are being mounted. The umount command would I expect be umount /media/floppy0 /dev/fd0...I tried searching the web and this forum and didn't find anything helpful. Can anyone help?
View 2 Replies
View Related
Jan 4, 2015
I am using Debian Wheezy with LXDE and I am using the monitor resolution as 1280x1024. Now the Window maximize, minimize buttons look tiny and its pretty irritating. Is there anyway I can make them bigger ? I tried googling but whatever documentation I found was regarding GNOME not LXDE since not many people use it. I don't want to try any online themes of Linux just want the buttons to be bigger. Is there anyway ?
View 12 Replies
View Related
May 3, 2010
I'm running lenny on a dell c600. Presently I'm using kde (which is great), but due to system requirements (c600 is ancient... more than 5 years old ; ) it's a bit slow. So I started checking out lxde and xfce. There both great, except for one problem: The left click on a program icon in the (pardon the microsoft analogy) start menu launches it unstead of giving me options like 'link to desktop'
View 7 Replies
View Related
May 31, 2010
I've just installed FC 13 and trying to get Real Player installed. After downloading it from Real installing it gives this error
rpm -ivh RealPlayer11GOLD.rpm
Preparing... ########################################### [100%]
1:realplay ########################################### [100%]
postinst called with unknown argument `2'
warning: %post(realplay-11.0.2.1744-1.i386) scriptlet failed, exit status 1
Then it thinks it's installed because it doesn't install again have to force it the second time. Can't remove it though because that doesn't think it's there.
View 2 Replies
View Related
Aug 26, 2011
I find xcompmgr more than adequate for making a desktop look pretty modern, and I don't like the more extravagentCompiz gimmicks - but there is one thing that irritates when using xcompmgr which someone here might have worked round.
Rounded window borders don't draw and redraw properly when using the Terminal (gnome-terminal and the LXDE and Xfce ones) or system monitor and moving them from their default place. You get this little white botch at the corners. I'm not massively technical and I'm ambivalent about how much more I want to learn as I have plenty of creative outlets already, but I would like to solve this. Somehow xcompmgr is treating these programs as a different class? It's capable of drawing the window borders properly as it is just these two programs that get botched. Possibly this doesn't get noticed as maybe people usually use xcompmgr with openbox and LXDE and their square window borders. I did do a search but there was nothing matching what I saw.
View 3 Replies
View Related
May 28, 2010
After installing from the LXDE live CD I am unable to login. I type in my username, and then my password, and then the prompt goes back to the username (in other words, nothing happens). I can however login via the virtual terminals.
Could this be an issue with the live cd? Or was it just a bad install?
View 8 Replies
View Related
Aug 30, 2015
So I can't install Firefox, because it conflicts with Iceweasel, but it appears that uninstalling Iceweasel uninstalls GNOME (gnome & gnome-core).Is there any way around this? Perhaps telling apt that Firefox is an alternate to Iceweasel?
View 3 Replies
View Related
Oct 27, 2010
I installed lxde, but my wireless internet doesn't work. I can switch back to gnome and it works perfectly. I tried wicd and manually connecting with the command line. Both fail while trying to get an ip.
View 2 Replies
View Related
