I installed fwknop-server automatically using apt-get, however, got version is 2.0.0rc2, while I found that version 2.6 is available. How can I get it in the easiest way? I'm using debian wheezy 3.2.54-2. I tried apt-get update, upgrade and dist-upgrade, nothing worked.
View 3 RepliesI've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
View 12 Replies View RelatedI have a linux webmail server which is old version. How should I upgrade this server?
View 3 Replies View RelatedI have just setup a new server whith a host who only provide the hardy distro of ubuntu. I want to upgrade it to at least jaunty, however after upgrading from 8.04 to 9.04, it requires a restart and after it restarts i can no longer connect to it at all. I'm fairly certain it must be reconfiguring the firewall to prevent all access on reboot.
View 5 Replies View RelatedI need to upgrade our PHP from version 5.1.6 to anything higher.
What is the latest version of PHP for CentOS ? I need a stable version, not a test version.
Should I upgrade from CentOS 5.2 to 5.5 ?
Debian 504 64-bit
Emacs 22.2.1
I have emacs running on the box
$ apt-cache policy emacsemacs:
Installed: 22.2+2-5
Candidate: 22.2+2-5
Version table:
23.1+1-4~bpo50+1 0
1 [URL]
*** 22.2+2-5 0
500 [URL]
100 /var/lib/dpkg/status
But I need to upgrade it to the latest version 23 which is NOT on repo.
CentOS 5, installed ffmpeg and compiled the ffmpeg.so, from fffmpeg-php-0.6.0. Everything works fine. Then upgrade the php to 5.2.13 (using an external repository)recompiled ffmpeg.so but now when trying to load php:PHP Warning: PHP Startup: ffmpeg: Unable to initialize moduleModule compiled with module API=20050922, debug=0, thread-safety=0PHP compiled with module API=20060613, debug=0, thread-safety=0These options need to match in Unknown on line 0
View 2 Replies View Relatedhow i can request debian maintainers for upgrade package version in repos?
View 11 Replies View RelatedOn my debian web server I curently have ImageMagick 6.3.7 08/07/09 Q16 since this is an old version of imagemagick i wanted to upgrade my system that still runs etch, and afterwards upgrade imagemagick. I can not see what version the current lenny imagemagick package has, but I assume it is newer then 6.3.7, no?
When i ugraded I found out that my apt-sources used stable rather than etch. So I already had a mix of lenny and etch I suppose. I then had > cat /etc/debian_version 4.0 Before I upgraded I changed my apt sources from stable to etch, updated the package-tools and did a dist-upgrade (for details, I followed these instructions). After restarting I have still 4.0 as debian version. Also uname -r is 2.6.17. How can I do a correct update?.
Also my services were not started (ftp,ssh, apache2), so I asked my hoster to start the ssh service. This morning everything was up again, but it seems like nobody there have had a look at this. How do I absolutely ensure that my ssh service is start at boot. It is a remote webserver, so I need at least this service to be running.
How do i check for updates to the current version of rkhunter and if possible upgrade to a new version?
View 2 Replies View RelatedI have installed Ubuntu 10.10 desktop version on my Lenovo L420 laptop. Now my friend told me that if I had installed laptop version on it then it would have recognized events related to laptop like closing down the laptop screen and all.
Q1. Is there any way by which I can upgrade it to laptop version?
Q2. What are the differences between both?
I have a server running Reh Hat Linux 7.3 with kernel 2.4.18. Can i upgrade kernel to version 2.6 and glibc to version 2.5?
View 6 Replies View RelatedI am using Nagios 3.2.4 monitoring tool on a Linux box with Fedora 10 installed on it and Apache version is 2.2.10. I would like to upgrade my Fedora version from 10 to latest version Fedora 13.
View 9 Replies View RelatedI would like to recompile the openssh-server with a different version string. I download and compile the source, but so far I have only been able to compile and run the client. Not the server.
Steps taken:
Is there a flag or option I need to specify to insure that it creates the sshd?
name server not pointing to user area on debian 2.6.30-6 gcc version 4.3.4?
View 1 Replies View RelatedInstalled Zend Server CE on 10.04 - install mostly fine. But phpmyadmin shows this error; "Your PHP MySQL library version 5.0.83 differs from your MySQL server version 5.1.41" I have followed the Zend online docs and used a DEB install. Why would these versions be different?how do I fix it so that the two are in sync?
View 3 Replies View RelatedI installed debian squeeze on an old computer that I found. (Pentium 4 3.2GHz HT) I installed from the i386 version, but now the uname command shows that its an i686. I don't find many packages that I need using apt-get. Do I need to compile each package I need from source or use dpkg to install the deb of an i386 version?
Can I use the i386 version on this computer rather than the i686 version? Will it cause a signifncant performance decreaes? (I use this computer to mostly do some reading and writing and file storage, no gaming etc.) How do I force the installer to use the i386 version?
[Code]...
Sometimes a kernel image seems to have the same version as the backported kernel image, for example:
linux-image-2.6.32-bpo.5-amd64
linux-image-2.6.32-5-amd64
What are the differences between the two?
I want to upgrade mediawiki software from version 1.6 to version 1.16 . The newer version is supposed to be installed on another server. I am trying to migrate the old mediawiki mysql database with no success.
I run the following commands -
Code:
Code:
to restore db on new server -
Code:
I get the following error message -
Code:
How do the version numbers compare? Are they identical? I have Iceweasel 3.5.13, does that mean I essentially have Firefox 3.5.13?
View 11 Replies View RelatedToday I saw that there was an update available for my LAMP server that involved BIND.
So after I ran an apt-get upgrade i got the following big stack of messages ending sadly with error and I cannot upgade the of "fix" the system after that. Any Ideas? code...
Following yesterday's and then today's upgrade of my Debian 8 32-bit system (among other things to samba 2:4.1.17+dfsg-2+deb8u2 (yesterday: ...deb8u1)) I cannot connect my Mint 17.3 laptop to the server anymore. Were there any changes to smb.conf regarding authentication or other aspects that might lead to this problem? I am enclosing part of my smb.conf. By the way - I also have trouble using ssh to connect to the Debian machine, such as the ssh-command taking "for ever" and then getting the message "Write failed: Broken pipe" when entering an ls-command on the command line.
H. Stoellinger
smb.conf:
[global]
workgroup = RAINERMUSIK
netbios name = hsdesk
server string = Samba Server hsdesk
[Code] ....
I did a distribution upgrade using "apt-get dist-upgrade". After rebooting, I receive a message saying "Failed to start the X Server". When I okay the prompt for more info, I see the following: GDM: Xserer not found: /usr/bin/X :0 -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7 Error: Command could not be executed! install the X server or correct GDM configuration and restart GDM.gdm[4678]: WARNING: gdm_server_spawn: Xserver not found: /usr/binX :0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7
View 9 Replies View RelatedA very strange thing happened to me today after upgrading a Lenny server to Squeeze. All seems to be working great except for the fact that I cannot join the server to our domain (made a work copy of the virtual machine holding Debian, upgraded that, renamed and changed IP).
The problem I'm having is related to Samba as far as I can tell. On the Lenny server(s) I have the 'net' command to join a server to a domain but not on the upgraded version (Squeeze). It just says command not found and there's indeed no 'net' in /usr/bin where it's supposed to be.
I imagine that something went wrong upgrading Samba although the rest works, the daemons are running, kerberos works (kinit, klist), and so on, I only miss the net command.
Is there a way to install that separately or which package do I have to reinstall (samba-common, sambafs, ...)?
I have other servers (clean install and upgrade from Lenny to Squeeze) that do have the command in /usr/bin. Can I just copy it over from one to another or do I have to remove and reinstall Samba all together?
I have upgraded my debian server on april when Jessie came up, but I *forgot* to reboot at this time. As a new kernel* was released this week as a security update, and since my server installed it (via unattended-upgrade on security packages), I rebooted it last night. It never came back online.
I have access to a rescue boot (Ubuntu 12.04 LTS), and tried to analyse the failure (by mounting /sys /dev /proc and /boot and chrooting), but without luck so far.
As it's a dedicated server, I don't have access to the console. What I know :
No log in var/log since the failed reboot. I don't know how to have/find others logs.Previous kernel was 3.2.0-4-amd64, new is 3.16.0-4-amd64, What I tried without luck) :
Change the booting kernel, via update-grub. Tried 3.2, 3.2 with sysvinit and 3.16 rescue mode I think. I should have done it right, but without console it's hard to tell.apt-get update/apt-get upgrade/apt-get dist-upgradeadding nomodeset to kernel load in grubWhat I haven't tried :
update-initramfs, I don't really know why it would block the boot
*linux-image-3.16.0-4-amd64:amd64 3.16.7-ckt11-1+deb8u2
I've just recently upgraded to lenny using aptitude (following the instructions on debian.org. All went smoothly, and almost everything is working fine.I have had my X server crash twice since then, both times when I simply doubleclicked a running application. There is some indication of problems in the Xorg.log file, but it's not helpful to me -- can you help me understand?
View 2 Replies View RelatedIf I had an old computer with Ubuntu version 5.10, 6.06 or 7.04 then how would I get it upgraded to 10.04 when it releases?
View 6 Replies View RelatedI use the ubuntu 9.10 karmic edition, and every time i use the update manager, i am prompted for the upgrade to the newer version of the ubuntu i.e 10.04.1,
is it advisable to do so ?
does grub change its contents after such upgrade ?
and what difference will it make to my present system?
How can I upgrade php version to 5.3 on CentOS 5.6 My current php version is 4.4.9. I want 5.3.
View 7 Replies View RelatedI installed transmission on my fedora14 VPS from yum which is version 2.11,to use transmission in some privte trackers i have to update to latest stable release version 2.22,so, how do i upgrade my old version?and another question is can i use rpm pakages find here[URL]
View 9 Replies View Related