Debian Configuration :: Root Passwd Not Working
Jun 25, 2011
my debian laptop this morning ,saw that the update manager had updates..97 of them??? then when tried to view them the package manager freezes and becomes unresponsive. needed to do a few things and found my root password is NOT working. this all happened at the same time, i wonder if its related? have i been hacked? is this something new? cant reset root password (tried two methodeds with no luck) and cant view the updates altho i question 97 new updates are needed.
View 7 Replies
ADVERTISEMENT
Sep 4, 2011
Reinstalled Debian Squeeze (64bit/gnome) on my Notebook using Netinstall. Everything worked like always but in the setup instead of typing in a root password as asked to i just pressed enter (in the hope of not having to type in a pw in the console later, just having to press enter then)
When i needed rootpw to install some software (using SoftwareDownloader) the normal loginpw seemed to work, but not in the console.
ari@HP625:~$ su -
Password:
su: Authentication failure
[Code]....
View 3 Replies
View Related
Jan 26, 2010
I edited the passwd file to modify the default shell for root from bash to tcshnow when I try to login to root it gives me the following error:"su: /bin/tcsh : No such file or directory"
View 3 Replies
View Related
Mar 8, 2011
Is there anyway to have a different password for login and root? For example, my account is Bratu. I want a login password: ABCD and my root password: EFG
View 1 Replies
View Related
Jan 15, 2010
I have Red Hat version 4 I was trying to change the root password with the passwd command.I get the error passwd: PAM [dlerror: /lib64/security/sufficient: cannot open shared object file: No such file or directory] I have change the password before.
View 5 Replies
View Related
Feb 17, 2009
FC9 - Sulphur, x86, nothing fancy
Did an update (damn the unofficial repos!)
Found a problem with pam_passwdqc module.
Like the title says, I'm unable to change root's password.
I boot into singleuser mode, run passwd, get the
Code:
Boot into multiuser mode and I'm still unable to login.
Two questions:
1) Anyone have a 'default' /etc/pam.d/system-auth that I can replace with the system-auth that was obliterated by the pam_passwdqc update?
2) Any other ideas?
View 14 Replies
View Related
Oct 7, 2010
I deleted root from passwd and shadow file.Can I crate a new root user?
View 1 Replies
View Related
Sep 7, 2010
Recently installed some application which screwed the default common-passwd file and has put some restrictions on the passwords which I could setThe present file looks like this
Code:
#password required pam_passwdqc.so min=disabled,8,8,8,8 passphrase=0 enforce=users
password required pam_passwdqc.so min=1,0,0,0,0 passphrase=0 enforce=none random=0
[code]...
View 1 Replies
View Related
Jan 14, 2011
we know that /etc/passwd - is a replica of /etc/passwd file and acts as a backup in any damage done to /etc/passwd file..i have observed a strange thing in RHEL 5.4....for example... if /etc/passwd has 100 accounts.. then /etc/passwd - is having only 99 accounts....when i add 101 useraccount with "useradd" then /etc/passwd has 101 accounts and /etc/passwd is having the 100th account of /etc/passwd - ..when i delete /etc/passwd and recover it with /etc/passwd - from runlevel 1 the lastly created user is not having his account after recovery.. what is the solution? this is same case even with /etc/shadow and /etc/shadow -
View 2 Replies
View Related
Aug 10, 2010
Not able to login to a user account, even after clearing the password from root using passwd -d
[root@ivrsdb1_pnq /]# passwd -S oracle
Password locked.
[root@ivrsdb1_pnq /]# passwd -u -f oracle
Unlocking password for user oracle.
[code]....
View 3 Replies
View Related
Oct 3, 2010
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
View 1 Replies
View Related
Aug 20, 2010
Having successfully installed SANE and gotten a scan from my ancient Mustek scanner, I thought I had it setup. But that was running in the root terminal window. When I try to run xscanimage from GIMP in my normal user account it doesn't start up. Running xscanimage in a normal terminal it says it can't see any scanners. Yes, I added my user account to the scanner group. What else needs to be done to let a normal non-root user access the scanner?
View 4 Replies
View Related
Sep 28, 2015
I have a "time-server". It's sending time to different devices through different ports/protocols. The problem is that it has no operator and that makes some extra difficulties.
Now when i try to start it using terminal Code: Select allsudo ./myprogram works fine and
Code: Select all./myprogram doesn't work.
It is so because without sudo i have no access to ports. As a result If i add my program to System->Preferences->Startup Applications it has the same problem. So i need to start it as root, auto-start, right after auto-login to system but without entering password cause nobody will do it.
Also I need to start ntpd but it also asks password sometimes I've tried googles but it offer a few ways with entering password that isn't suitable for me or writing some scripts/changing system files but with no example I'm afraid to break it all. So is there a way to start Myprogram and NTPD as root with no password entering?
My system is Debian 6.0.10 Squeeze, Kernel 2.6.32-5-686
View 12 Replies
View Related
Oct 28, 2015
Installed Debian 8.2 a while back, and I've been having issues with getting the machine to suspend correctly. If I try to put it to sleep when logged in to my regular user account the screen just goes black and then the computer hangs. However if I put it to sleep as root everything works fine. I do this by running this command (as root):
Code: Select allsystemctl suspend
What can I do about this? Worked fine on Debian wheezy..
Btw, just found this in the dmesg log. Connected perhaps..?
Code: Select all[ 6.863018] ACPI Warning: SystemIO range 0x00000000000018e0-0x00000000000018ff conflicts with OpRegion 0x00000000000018e0-0x00000000000018ef (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 6.863028] ACPI:
If an ACPI driver is available for this device, you should use it instead of the native driver
View 7 Replies
View Related
Jan 27, 2016
I think my root drive is 100% full causing strange problems with my video server. What steps can I use to see what's taking up the room on the drive and perhaps identify files that can safely be deleted?
Code: Select allroot@lenny:/# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 55G 53G 0 100% /
udev 10M 0 10M 0% /dev
tmpfs 793M 1.1M 792M 1% /run
[code]...
View 14 Replies
View Related
Feb 11, 2010
For my dissertation I created a debootstrap install of Lenny. When I boot this system I just can login with root without a password. When I want to ssh this machine with the debootstrap install I can't just login with root. I'm asked for a password which I don't have.
So I created one with passwd root and after that I can connect to the machine with ssh and the given password. But the machine still logs in with without a password.
View 3 Replies
View Related
Jan 17, 2011
I'm configuring some security and i'd like to run arpon to a specific device everytime wicd connects.So, if Wicd connects to a wireless, i'd launch gksu arpon -d -i eth2 (for example.) But this doesn't work, because it seems that gksu only works for X apps.I found that if i do: gnome-terminal -e 'sudo arpon -d -i eth2' It works, but it leaves me with a terminal window open, and i'd like to be asked for a password gksu style.I've also tried this: gksu -- arpon -d -i eth2which also works, but the program quits right after it's started.Am i missing something here?
View 14 Replies
View Related
Feb 17, 2011
We have setup Squeeze a Test machine , just for some tests, without network, Internet etc. and we need to allow root login in Gnome.
We've changed /etc/gdm3/daemon.conf:[security]
AllowRoot=truebut still doesn't work.
View 4 Replies
View Related
Jul 15, 2011
I try to allow root login in ssh on wheezy usb-hdd LIVE using this script in config/chroot_local-hooks:
This script was working well during squeeze usb-hdd live creation.
View 5 Replies
View Related
Jan 23, 2016
Is there a way where I can take like 50GB from my home folder (I have 375 avail., but using only 22GB) and put it to the root partition? Twice now my system has almost ran out of space on root, so luckly I was able to clear out old stuff so I don't have login issues after finding the hardway the first round lol. I just want to make sure I can login with out being forced back out because root don't have space to let me login.
View 11 Replies
View Related
Apr 28, 2016
I made a mistake in Gnome Disk utility tool. Instead of changing the options for a USB key, I changed the options of the root partition.
In Initial state, automatic options were desactivated. I just activated them. And after desactivacting them, I realized my mistake and switched back to "non automatic options".
By doing this, I suppose that defaults values were used since now, the system starts in command line mode and no more in graphic interface mode.
When I try the "startx" command, I get a "read-only" error.
With the command "sudo mount -o rw,remount /" the graphic interface is started.
Below is the configuration of the partition under the gnome disk utility tool :
"Mount at startup" is checked
"Show in user inteface" and "Require additional authorization to mount" are unchecked
Mount options : nosuid,nodev,nofail,x-gvfs-show
Mount point : /mnt/eb11d4d6-75db-XXXx-XXXx
Identify as : /dev/disk/by-uuid/eb11d4d6-75db-XXXx-XXXx
Filesystem type : auto
I do not want to change anything that could leat to a critical error. So what do you think I should do ?
View 1 Replies
View Related
Jan 18, 2011
I have the partition like below. Now i want merge the /home partition into /dev/sda1 partition .
[Code]...
View 4 Replies
View Related
Feb 12, 2011
Before I ask I know what I'm asking is not recommended.
On Lenny It was possible to change the boot login to permit logins as root
I can't find how to do that since I installed Squeeze.
View 10 Replies
View Related
Mar 9, 2011
I have squeeze with gnome. Various apps let me log in as root when needed to but if I logout as a user and try to login as root it won't let me (won't authenticate password). I had this problem before and reinstalled Debian and definitely checked for it to allow me to do this and it worked for a while after new install. Apparently some update overrode my preferences. This is a major defect and may force me to abandon Debian. I don't use root often but I don't have any use for a operating system that won't let me use it. Anyone know how to correct this. I am not interested in using a terminal on a regular basis or ever for that matter.
View 14 Replies
View Related
Jun 29, 2011
on my netbook I've tried to make possible for my user to shutdown without needing a password. battery could run low when I'm not in front of it. Editing sudoers has allowed my user to shutdown the system, but Gnome still prompts me for the root password whenever root is logged in too. That's usually the case, because to avoid entering the root password multiple times whenever I need elevated privileges and not wanting to cache the root password, I keep a Root Terminal always open.
View 6 Replies
View Related
Aug 4, 2011
I just installed Debian 6 on a server and when the server powers up, it shows me all the accounts I created in order for me to choose and login under an account, except for the root account. At the colo where the server is going, they need the root account at the login screen.
View 11 Replies
View Related
Jun 19, 2014
I installed Debian Kit on my Asus Nexus 7 tablet, and after following the installation tutorial I got it running except for I'm stuck on the step to create a new user. (btw link: [URL] .... )
Here's how it went (I can't copy&paste from my tablet so I have to type out everything...):
Code: Select allroot@android-6c40984c21c156ae:/# adduser paul374
Adding user `paul374' ...
Adding new group `paul374' (5000) ...
Adding new user `paul374' (5000) with group `paul374' ...
Creating home directory `/home/paul374' ...
[Code] ....
So since I read somewhere that selinux had some permission problem, so I did a few chcons:
Code: Select allchcon --user=u --role=r --type=init --range=s0 /etc/passwd
chcon --user=u --role=r --type=init --range=s0 /etc/shadow
chcon --user=u --role=r --type=init --range=s0 /etc/gshadow
And it did take effect:
Code: Select allroot@android-6c40984c21c156ae:/# ls -Z | grep passwd
u:r:init:s0 passwd
u:object_r:unlabeled:s0 passwd-
root@android-6c40984c21c156ae:/# ls -Z | grep shadow
u:r:init:s0 gshadow
u:object_r:unlabeled:s0 gshadow-
u:r:init:s0 shadow
u:object_r:unlabeled:s0 shadow-
...but still same thing as what happened in the beginning...
Anyway my goal is to create and be able to log in to another user so that I'm not stuck running root all the time. (Which, as we all know, is a bad idea.)
If there's a way to manually create the user by editing a few files, and root still won't be able to change passwords, I'm fine with that, as long as I have another user. Whatever it takes to just get a non-root user log-in-able...
I forgot to mention that since this is the Asus Nexus 7, there is no removable media, so chrooting from another Linux machine isn't an option, and neither is removing an SD card to use a LiveCD on it.
View 8 Replies
View Related
May 7, 2015
I'm using Debian Jessie Cinnamon right now. I've got 1 user account on my machine--fred--as well as root, of course. "fred" is an administrator, and many times that is enough for root priviledges, for example, I can install packages via apt or dpkg. However, I cannot access "Users and Groups", or install packages via GDebi, with my password. For that, I have to have the root password.
I know that it is possible to let the admin account handle everything and not even need root--for example, Mint and (I believe) Ubuntu do it this way. I don't know how, though.
Code: Select allgroups fred
fred : fred cdrom floppy sudo audio dip video plugdev netdev lpadmin scanner bluetooth
I did disable the root account by Code: Select allsudo passwd -l root to see if it would make any change. Nothing different happened except that I now can't use GDebi or access "Users and Groups" since the root account and therefore password is inactivated. Not a big deal to get it back, though.
View 10 Replies
View Related
Apr 12, 2016
I have lost my password for my root and for my user account.
Code: Select alluser@debian:~$ su
Password:
su: Authentication failure
user@debian:~$ su
Password:
su: Authentication failure
user@debian:~$ su
I have just installed a gust debian 8 on debian 8 host in virtualbox, and when i wonted too login as su/root on the host there where no login possible, is there a way to regain the root password for the host?
View 2 Replies
View Related
Mar 4, 2010
My root filesystems flooded so I'm trying to move it to another (bigger) partition but I'm not sure of the best method. I just tried to use "dd if=/dev/sda1 of=/dev/sda6" to copy it but all that did was give me a brand new partition with no freespace available presumably because the filesystem is smaller than the partition. Is it possible to make the filesystem bigger?
View 8 Replies
View Related
