I've found plenty of resources that state how to converge the installation cds into a dvd, but does anyone know of a way to take a dvd iso and split it into the multiple installation cds?
Also, I know it's possible to just download the cd isos, but that's not the goal of this exercise.
I have a file of +1 1GB in size. I want to split it in either 100MB rar files or 100MB zip files.
Anybody know what command I need for this?
Please keep it simple, I'm very new to linux. So I'm hoping somebody can give me a command in the lines of "blabla "put file name here" "put file size here" "put folder to rar/zip" here.
I made a personal automatic installation dvd. It works perfectly but someone asked installation cd's. I don(t know how i could do it size of my dvd 1500 MB.How did the administrater of centos split the dvd into cd's?
View 3 Replies View RelatedI am downloading a set of files that were split by a program called ffsj
http://www.jaist.ac.jp/~hoangle/filesj/
The Fastest File Splitter and Joiner.
I have been googling it, but I am not finding anything that is telling me how I might join these files using my CentOS Linux. How can I join these files using CentOS?
I've set a two-node cluster using Pacemaker/OpenAIS. I have only one network and if I break this one, the communication between node is interrupted ... With a ClusterIP resource, when network is breaked, then each node start the ClusterIP => 2 same IP .. Is there a way to define the prefered location of a resource when connection between these nodes is broken ?
A <==> B
If one of the node lose the network, then follow a previously written rule : start resource on A (for example). B will know than it's not the prefered node and so, will stop to serve. Possible ? This is because if both node are connected, but a problem between these node occur and client can join both node ... then the split brain is problematic ... A better solution is to add a rule when the split-brain occurs : all node wich can't reach the gateway have to stop all resources ... And so, if it's A wich lose the network, service will start on B and only B without any problem ...
Im in a unique situation where a box has a 400G file, on FreeBSD, without thesplit' utility available
View 11 Replies View RelatedWhen the system was setup, it was setup with one physical LVM, and one logical LVM (aside from the swap and boot) as the "default" partitioning. Now I want to make /var sit on it's own partition.
1. I booted with a Live CD, and reduced the size of the LogVol00 from 1.5T to 100G (I plan to split out more than just /var...but I'll start with /var)
2. I created a new logical LogVol02 for 100G Ext 3 FS (step 1 and 2 with LVM GUI Utility) which seems to have worked just fine.
3. I did the following (from the LIVE CD) :
[Code]...
Right now, if I had to reinstall and define each partition at install time, it wouldn't be a problem, the system hasn't been fully configured...but the point of the exercise was to work with LVM (i've never used it before, I always used just fdisk only) and learn to split off directories into their own parition.
i have a folder of size 50 gb in my fedora 13 system. i want to split the folder into 5 pieces of size 10 gb each. how to do that? purpose is i am going to gunzip this folders seperately and going to write in dvds
when i attempted to gunzip that 50 gb folder,i got 12gb tar.gz file which is not equal to the size of a dvd. then i dont want to split that file.
I'm trying to upload my tar'ed site to server but I have upload limit. My ftp program extracts tar after uploading it. How do I split this one tar into two so I could upload one tar and let it extract itself, and then upload second one and let it extract itself too?
View 1 Replies View RelatedHow do I split my partition in 2?
View 2 Replies View Relatedwhen I run the following command:
awk -F, '{print $10 "," $5 "," $1 "," $3 "," $4 "}' myfile > tmpfile
tmpfile displays the lines but they are all cut off and placed on the line below at the same point.
i have a folder of size 50 gb in my fedora 13 system. i want to split the folder into 5 pieces of size 10 gb each. how to do that? purpose is i am going to gunzip this folders seperately and going to write in dvds
when i attempted to gunzip that 50 gb folder,i got 12gb tar.gz file which is not equal to the size of a dvd. then i dont want to split that file.
Server have extended partition size around 490 GB. I want to spilt the extended partition to each two partition(ut0 & ut1) size 100 GB. How to split the extended partition in Redhat linux 5?
View 3 Replies View RelatedIs there any way to install BSD version of split in Linux in general and Debian in particular?
I need it because it has a very useful option: -n, which allows you to split a file into given number of chunks without specifying chunk size.
I have a 7 GB VOB file which I created from a DVD using ffmpeg dump to remove CSS protection (it is legal where I live to do so). Now, I want to create a DVD/.iso that will be understood by regular DVD players/appliances. How do I do it?
View 1 Replies View RelatedI am using rsync to create rotating snapshot style backups of my web files and sending them via SSH to a remote location in order to burn them for offsite storage. This is all working perfect. The remote machine is a Windows Server 2003 which has data that I combine with my web files before burning. I have cygwin installed on the remote server in order to archive and compress the entire backup using tar. (This is not a post about cygwin, I just thought I would mention it in case anyone was wondering how I was running Linux commands after transferring it to the Windows box). After compression, the backup is over 12gb. The next step in my process is to split this tar.gz file into smaller chunks in order to burn them to DVDs. I use dual layer DVDs which are 8.5gb storage size.
I also use cygwin to split the tar.gz into multiple 2gb files using the split command. When I burn them, I only put 3 files on each disk totaling 6gb to leave some padding in case this was a problem. The burn completes and says successful, although it errors out when in verification. I have tried this multiple times and it seems to fail verification at the same point every time which leads me to believe that it has something to do with the data. I have also done tests such as creating smaller backups with completely different data and brning that to a CD-R which worked fine, so I'm convinced this process can work, I just cant get it to work in the right situation. I have also tried burning one of the 7 split files to a dual DVD which also worked fine. I'm wondering if their is a chunk of data that is causing this problem in one of the other split files?
Did you know that while in Nautilus 2.30.1 using Ubuntu 10.04 you can have split-pane by pressing the F3 key. You can copy files from one to the other. Here is a little video howto from LJ. [URL]
View 9 Replies View RelatedI recently downloaded a program to find out it was in pieces. What I originally conceived as being a small problem has turned into a major time wasting dilemma.
I've tried many different things to get it to properly extract, viewing threads on these forums even, but to no avail.
The files were named:
file.part01.rar
file.part02.rar etc.
I though this was the problem so I renamed all 84 files (except the first one), removing the .rar extension. No cigar.
My final attempt of several was using 7zip:
Code:
7z x myArchive.rar -o/home/[username]/Desktop
I was in the correct folder as far as I could tell.
I have included a screenshot of the files in order to stop any confusion about my description.
I want to split audio files at cirtain point in time.
View 9 Replies View RelatedHow do i install ubuntu so that only the OS itself (hope you get what i mean) is on my C: drive and other files like applications etc is on my D:drive? I use a raptor on 74gb which is faster but smaller than a normal hdd that will also contain windows 7 and crunchbang so I just want the main parts of the OS on that hdd. If it's not possible on install, which maps should be moved from the C: drive to the D: drive if i want all applications and such on the D: drive? And how do i configure so futur installations from synaptic or the apt-get command install files on the D
View 4 Replies View RelatedI'm looking for a free alternative to split files into .partXX files. I know this can be accomplished through rar, but it's a shareware and I was wondering if there's a free alternative that accomplishes the same job.
View 6 Replies View RelatedFor reasons best known to itself, the Ubuntu 10.10 installation programme created two drives when it put my favourite OS back on the existing partition (which had become inaccessible). One is 20GB, the other 12GB. The former appears to contain the programmes that run the current distro (boot, root, etc. and so on). The latter has all my personal stuff (text files, pics, music etc.) I don't much care about this dichotomy, it works after all. But there is a part of me that says that this is all a bit untidy, that the right thing to do would be to merge the contents into one. The rest of me says, "don't rock the boat." Is it possible to merge them? Should I do it? How might I do it?
View 1 Replies View RelatedIs there any way to split partition, in which my ubuntu 11.04 is.I don't wanna loose data, but I dont wanna reinstall it too.P.S. Now I have 750gb HDD, I want to split off 100gb~ for dual boot win7
View 9 Replies View RelatedHow can I split a line in vim into 2. example :
original line :
welcome to linux questions
after splitting :
welcome to
linux questions
Is there a single key strike through which i can do it ? like going to the word "to" and striking that key will put rest of the words in new line. ( i want to do it in normal mode , not in the usual insert mode where it obviously can be done by typing <Enter> )
I'm running 2 asterisk box (Centos) ,and the two servers are connected through 2 iax trunks.on one server i have 2 nics ,each one is connected to internet,now i want to use isp 1 for the first trunk and isp 2 for the second trunk.
iax 1 is listening on 12345
iax 2 is listening on 11223
is there a way to split traffic on both nic using ports (netfilter iptables)?
i have created two physical volumes, later added volume group to it and then created logical volume and formated the logical volume n mounted it on directory now now i wanted to split the volume group but am unable to do it.If i tries it error msg displayed as existing volume group is active and i have to inactive that volume group
View 4 Replies View RelatedSplit Apache log with cronolog,
cronolog version 1.6.2 --install with tarbar.
apache configuration
Code:
CustomLog "|/usr/local/cronolog logs/access_log_%Y_%m_%d" combined
stop apache, del all log files.
restart apache, visit a url, no access_log_YYYY_MM_DD log file ...
Also no error msg in error_log file .....
I have one pdf file with 55 pages. I would like to reduce file size so
A. I would like to split it to several pdf with few pages each. Is that possible some how?
B. Also a good idea is to convert pdf file to some other file extension just to reduce file size.
How would I go about splitting a file by section? Imagine the file looks like this:
Lots of text 1
Lots of text 2
[HEY, SPLIT HERE]
[code]....
I want to use a command that would split this file, but look for the text "[HEY, SPLIT HERE]" to get the split points.
Rather simple question, but is there a way to make an archive (simple tarball, no compression needed) out of a very large file and split it into parts? Basically I need a ~1GB file in 25MB pieces.
View 1 Replies View Related
