CentOS 5 :: Manual Upgrade Of Xorg-x11-drv-i810 Failed
Oct 23, 2009
I downloaded xorg-x11-drv-i810-1.6.5-9.21.el5.src.rpm to my CentOS 5.2 system and I want to overwrite the existing xorg-x11-drv-i810-1.6.5-9.13.el5 with it. I don't see any changes when I check with rpm -qva :
Quote:
[root@centos52-64-fuj t]# rpm -ivh xorg-x11-drv-i810-1.6.5-9.21.el5.src.rpm
1:xorg-x11-drv-i810 ########################################### [100%]
[root@centos52-64-fuj t]# rpm -qva | grep i810
xorg-x11-drv-i810-1.6.5-9.13.el5
View 7 Replies
ADVERTISEMENT
Dec 15, 2010
I have installed suse 11.2. Sometimes while using (firefox, okular, open office etc) x server restarts & comes to login screen. While checking Xorg.0.log i found i810 module is failed to load. Is this causing the x server restart?
View 9 Replies
View Related
Mar 2, 2010
I have a IBM ThinkCenter workstation with an Intel i810 chipset and can only get a resolution of 800x600 maximum. I have read this url dealing with this chipset and resolution and cannot get anything past 800x600.http://www.freebsd.org/doc/handbook/x-config.htmland here is my /etc/X11/Xorg.conf
PHP Code:
Section "ServerLayout" Identifier "Default Layout" Screen "Screen0" InputDevice "Keyboard0" "CoreKeyboard"EndSectionSection "InputDevice" Identifier "Keyboard0"
[code]....
View 2 Replies
View Related
Feb 2, 2011
I'm wasting hours on this problem: I'm setting up an always-connectable VNC server loaded via xorg.conf.
This is what I did: yum install vnc-server
View 3 Replies
View Related
Oct 9, 2009
I want to upgrade my current Centos 4.6 to the newer version which is Centos 5.3 without wiping off my current HD, I have an Adaptec Raid Controller on my supermicro server, but strangely enough Centos 5.3 DVD Installer can't do upgrade only full install and dont event recognize my HDs (cause it didnt load the I2O block drivers). Is there any way during installtion procedure to load the I2O block driver via kernel parameter or other switches?
View 5 Replies
View Related
Oct 23, 2009
uname -a
is
Linux centos52-64-fuj 2.6.18-92.el5 #1 SMP Tue Jun 10 18:51:06 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
Yum upgrade gives :
Quote:
---> Package libsilc.x86_64 0:1.0.2-2.fc6 set to be updated
---> Package sgpio.x86_64 0:1.2.0_10-2.el5 set to be updated
---> Package meanwhile.x86_64 0:1.0.2-5.el5 set to be updated
---> Processing Dependency: libhdf5.so.0()(64bit) for package: octave
---> Package cyrus-sasl-md5.x86_64 0:2.1.22-5.el5 set to be updated
---> Package fipscheck.x86_64 0:1.2.0-1.el5 set to be updated
--> Finished Dependency Resolution
Error: Missing Dependency: libhdf5.so.0()(64bit) is needed by package octave
Error: Missing Dependency: hal >= 0.5.9 is needed by package gparted
View 8 Replies
View Related
Jan 25, 2011
I have installed a dozen dual boot XP / Ubuntu boxes, however this one has me stumped. After the installation failed in the partitioning phase I tried manually partitioning which also failed. Then I went to using a Gparted LiveCD. I can resize the NTFS partition fine each time rebooting in XP and it is OK. However when I shrink the NTFS then try to add an ext4 (or ext3) right after the NTFS it acts like it is working, then when it says "complete" the disk disappears out of Gparted and it shows no devices. If I reboot into the LiveCD it shows a blank second partition, if I try to format it in ext4 I get the exact same results. If I go to Windows it will show an unknown healthy partition. If I grow the NTFS back to the full 60Gb it seems to work fine. It just won't create a second primary ext4 partition.
View 1 Replies
View Related
Jun 24, 2010
After upgrading Ubuntu from 9.10 to 10.04, the cron daemon no longer runs automatically upon starting up the machine; I need to enter "sudo service cron start" to get it running. Is there a way to get it to start up by itself?
View 3 Replies
View Related
Dec 5, 2010
When I see a typical reference to a Unix manual, it often follows by a number surrounded by parentheses. For instance syslog.conf (5). I am sure this means something, but Googling it is impossible.
View 4 Replies
View Related
Jul 27, 2009
Currently I am attempting to install Centos 5.2 64bit onto a Supermicro X7DCL-3 motherboard based machine. The Raid recognizes the HDD that's been installed into it, however, the drivers for the raid are not included in the install. After contacting Supermicro I've been supplied with a driver package that should fix the problem.[URL]However, I am still having trouble using the package in order to find the HDD (The only HDD in the machine) that is on the raid.I think I'm doing something that's should be fairly simple, but am screwing it up pretty bad.
View 1 Replies
View Related
Sep 24, 2010
This morning I logged in and typed startx. My box said:
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(EE) PreInit returned NULL for "Mouse1"
Since I have two computers, basically identical, I looked up stuff on one and I decided to upgrade the problem box to 13.1 from 13.0 since that would undoubtedly fix the problem. Well, the problem is the same. However, root can startx just fine. Also, gpm seems to work fine for the user.
View 4 Replies
View Related
Jul 3, 2010
I'm using Karmic and just recently had to do a fresh install. After installing I immediately ran the update manager and updated everything I was told to update. Upon rebooting, my resolution is stuck at either 800x600 or 640x480. I've been searching around for a while now, and none of the fixes I've looked at have worked with my architecture. Here's my lspci output.
[Code]....
View 4 Replies
View Related
Oct 26, 2010
I used Ubuntu 9.10 with my current PC for about a six months, and never had much of an issue with my motherboard videocard. However, Moving up to 10.10, it seems a lot slower, and I get really bad fps on games. What's wrong here?
View 1 Replies
View Related
Mar 18, 2010
I am using ubuntu 9.10,when i bootup my system, it gives the error that "You are using very low level of grapics and system is unable to load module i810;
solution how to fix it
View 4 Replies
View Related
Oct 29, 2010
I was recently watching an avi file, when suddenly, my tower (the computer) got really, really noisy. That's pretty normal when I'm on my Windows side, but very unusual for Ubuntu Linux. I knew something was in the wind then and there. So I exit my Dragon Player to discover that ! gasp ! KDE is down, replaced with the default wallpaper for GNOME, and no bars anywhere. I reset the system only to find that it refuses to boot into either KDE or GNOME. Having been in something similar to this situation before, I decide that Xorg.conf must be broken somehow. In an effort to get to the GUI where I can safely edit it, I try reinstalling KDE and GNOME, which both failed.
So I try installing xdm...which results in only being able to access the login screen for XFCE. Whenever I try to log in using the correct credentials, it simply refreshes the log-in screen.
1. Is this, indeed, the sign of a broken Xorg.conf, or a broken Xserver in general? Or is there something larger that was changed?
2. How do I fix this? (I've already tried using Ubuntu 10.10 64 in rescue mode, but I can't seem to change anything in the system itself.)
3. Is this possibly a result of upgrading straight from 10.04? Is it possible that having both KDE and GNOME contributed to this?
View 1 Replies
View Related
May 16, 2010
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies
View Related
Oct 30, 2010
I've been using Ubuntu since Feisty Fawn, so I've been around the block when it comes to upgrades. From 9.10 to 10.04 I did a clean install, but I decided to try my luck with a web upgrade to 10.10. Well, so far it looks like that was a bad idea. I can't stay in gdm for more than about 1.5 mins before it crashes and drops me back to the greeter. Honestly, I'm not sure exactly what's crashing, but I'll append what logs I think will give some info.
[Code]....
View 3 Replies
View Related
Nov 19, 2010
every time i click or open or move a window it freezes for several seconds. system monitor shows at this time the process Xorg is using 100% cpu.it never drops down below 40%, even at idle.my system is amd 64 4000+ 3gb ram and ati 3650 HD video.i have kubuntu 64 10.10 with all the updates and default ati drivers.
View 6 Replies
View Related
Dec 10, 2010
Today I decided to do the upgrade from 10.4 to 10.10. Unfortunately the upgrade has frozen for the last few hours (after it has completed ~60% of job)... The problem is with xorg, when I log through ssh to the computer I see the xorg process takes 30%. what I could try not to 'smash' the OS... I am not an expert. During the upgrade I have experienced only 1 error with no space left on the device (it exceeded the estimations) but I have freed additional 2GB and it continued for some time.
View 3 Replies
View Related
May 17, 2011
I've just upgraded my Mythbuntu box to Natty. Now I have a completely unusable system due to Xorg taking 70% of CPU. Mouse movement is possible and I can just type but that is about it. Using MythTv is impossible.I'm running a standard mythtv build with the xfce desktop how to fix this one as it has rendered my PVR system impotent.
View 4 Replies
View Related
Oct 12, 2010
Here is the apt.log from running 'do-release-upgrade'. apt-get upgrade runs without issue and I have disabled all of the extra repos I had (opera, tor, lucid-propsed, chromium). My system is otherwise 100% up to date with apt-get dist-upgrade and apt-get upgrade. I have already purged all of my PPAs using 'ppa-purge', but it looks like there are remnants of xorg-edgers in there somewhere: [URL]
View 4 Replies
View Related
Mar 23, 2010
I recently upgraded from lenny to squeeze and have subsequently lost system beeps in X. What I don't understand is, system beeping works properly in console, such as when I backspace an empty line or in tab completion, but in X terminals it does not. While in xterm I can do 'xkbbell' and get a bell / beep, but get no bell if I do 'tput bel' or 'echo -e 'a' ' or ^G.
pcspkr is loaded.
the 'pc speaker' volume is maxed and unmuted.
xset has bell volume at 100.
There was a bug in xorg that seemed to describe this problem really well a month or three ago [URL], but it appears to have been fixed as of version 1.7.0 (vs the 1.7.5 on my machine). There's been some talk recently of eliminating/disabling pc speaker beeps by default, but I'm not sure what came of it? Anyway, this issue is for me as irritating as it is minor, and failing a solution I'd at least like to know why.
EDIT: Can someone running Squeeze/2.6.32-3-686 and pcspkr loaded try and do a ctrl+g in a x terminal and tell me if you get beep
View 1 Replies
View Related
Feb 7, 2010
Arch linux 32-bit AMD 2400XP, ATI Radeon 7500 Graphics Just did a system upgrade which included xorg-server being upgraded to version 1.7.4.901 This seems to have broken the "radeon" driver--I get a very dim green screen. I have now got the system running with the vesa driver.
Google shows that there is a known issue here, but I did not see my exact symptoms or a cure.
View 10 Replies
View Related
Jun 5, 2010
Upgraded from 13.0 to 13.1 following the instructions. Downloaded latest nvidia package (NVIDIA-Linux-x86-96.43.16-pkg1.run) for my geForce4 MX 4000. Compiled and installed new module (old one was 96.43.13).
Xorg fails to start with this:
Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux mercury 2.6.33.4-smp #1 SMP Wed May 12 21:39:37 CDT 2010 i686
Kernel command line: BOOT_IMAGE=Linux ro root=805 vt.default_utf8=0 3
Build Date: 05 May 2010 01:54:53AM
Current version of pixman: 0.16.6
Before reporting problems, check [URL]
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.....
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x80a1e6b]
1: /usr/bin/X (0x8048000+0x57b75) [0x809fb75]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xffffe40c]
Segmentation fault at address 0xc
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
The "nv" driver works.
View 4 Replies
View Related
May 20, 2010
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
View 1 Replies
View Related
Jun 15, 2011
I tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
View 2 Replies
View Related
May 2, 2010
1. How can I manually install a minimum GUI without using the 'Group Install' or 'Desktop' install options?
2. Where can I get a list of programs installed for the "Server GUI" ?
I'm used to doing this in Debian from a non gui system like this;
3. Is there a CentoOS equivalent method available ?
View 8 Replies
View Related
Jul 1, 2011
I just updated my Debian testing as usual (apt-get update && apt-get dist-upgrade), and it totally screwed up Nvidia drivers. I had to revert to integrated graphic card to start Xorg.
After that, I noticed that libgl1-nvidia-glx is missing, and when I tried to install it back, it produces the following:
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libgl1-nvidia-glx : Depends: libgl1-nvidia-alternatives but it is not going to be installed
E: Broken packages
Any ideas what's going on with it?
View 14 Replies
View Related
Apr 28, 2010
I upgraded my Asus Eeepc 900a to 10.4 yesterday. Since then, Xorg has averaged between 30-40% CPU, and my fans have gone nuts running high/low/high/low, ad nausium.
Any ideas what might be going on? Another clue perhaps: on reboot or shutdown, I get a "program not responding" message with "unknown" as the hung program. I have not been able to determine what this program is or if it is related to the hyperactive Xorg.
View 9 Replies
View Related
Sep 14, 2009
I've just recently upgraded to lenny using aptitude (following the instructions on debian.org. All went smoothly, and almost everything is working fine.I have had my X server crash twice since then, both times when I simply doubleclicked a running application. There is some indication of problems in the Xorg.log file, but it's not helpful to me -- can you help me understand?
View 2 Replies
View Related
