CentOS 5 :: Upgrading To 64 Bit Or Compatibility Lib?

Aug 15, 2011

I have installed Centos 5.6 (32 bit) in a virtual machine and would like to know if it is possible to update it to a 64 bit installation (probably I will also need to move to another version of the vm player too) or if there is any kind of compatibility lib(s)

View 1 Replies


ADVERTISEMENT

CentOS 5 Hardware :: SuperMicro / CentOS Compatibility - Specific Model 1026TT-TF

Sep 4, 2010

I am looking into 1026TT-TF and 6016TT-TF for a CentOS 5.4 or 5.5 64bit installation:

SuperMicro 6016TT-TF
SuperMicro 1026TT-TF

It will be used as a Web-server mostly. Since they are twin nodes, one node will be one strong firewall. I have been checking all over and I can't find any driver, bios, or issues with this specific motherboard from Supermicro and Intel 5500/5600 series CPUs. Is there anything that would concern you with these servers?

I am also looking to put in a 4-port Gigabit LAN card into one node which I doubt makes any difference in the whole equation. Further more, and most importantly, the first one takes only 2.5" HDDs and the second option accepts 3.5" HDDs. Other than size availability and price, are there any concerns regarding performance when chosing one over the other? System which accepts 3.5" HDDs only takes two per node so I have to opt for 1TB drives. For the 2.5" system I can go with 4 of 2.5" HDDs of 500GB in size. Either of options selected will be setup in RAID-1.

View 5 Replies View Related

CentOS 5 Hardware :: Compatibility Of RTL8191SE With 5.4 ?

May 5, 2010

I have a realtek RTL8191SE wireless card

I download a linux driver from the official website here : [url]

This is what i did :
step 1 : #make
step 2 : #make install
step 3 : #modprobe 8712u.ko

step1 ok
step2 ok
step3 : FATAL: Module 8712u.ko not found. (but this file exists)

I don't know if it is compatible with my centos5.4 did you know how to get the wireless work ?

View 2 Replies View Related

CentOS 5 :: When Centos RH Plans On Upgrading Php In Future Distros?

Sep 8, 2010

Recently upgraded to Centos 5.5 and was suprised to see that the distro still is running php 5.1.6.Anyone know when Centos RH plans on upgrading php in future distros?

View 4 Replies View Related

CentOS 5 Hardware :: Where To Go To Find Laptop Hardware Compatibility Information

Dec 10, 2010

I want to put centOS on a laptop with the i7-640M processor. I'm trying to figure out before I purchase a laptop which laptop (if any) will work sufficiently well with centOS. The software I'll be running is only qualified on centOS.Where do I look to find such information?Specifically I'm considering the hp online configurable dv5t laptop with the i7-640M processor.

I'm planning to leave it in a closet most of the time and VNC over VPN to get to it.Digressing still further, the performance for a single threaded application as well as the price and power consumption for "always on" make it a good choice for a server applicaion... not to mention the battery backup in the event of power failure. It may not be designed to operate under high CPU load for extended periods of time so I my use external fans to improve ventilation around the unit or take other steps to mitigate a cooling deficiency.Digressing yet still further, yes I do need the performance of the i7 so lower power processors are not an option. I just really only need one or sometimes 2 cores at most making the 32nm i7-640M ideal.

View 5 Replies View Related

CentOS 5 :: Upgrading From Ubuntu To Centos?

Aug 30, 2010

I have been using Centos on a VPS for about a year and love the speed and simplicity. So, I would like to convert my home computer to Centos 5.5 Currently, the computer is running Ubuntu 10.4 x64. The drive has 3 partitions (a main partition that I would want to format and install the Centos Base), a swap partition which can be formatted and used as is and a third partition that boots to /home.

I have a few concerns: 1-If I edit the third partition in the Centos install as "boot to /home," Will everything (theoretically) work? The only applications that concern me are E-Mail (evolution) and OpenOffice. I know that Centos 5.5 uses Evolution 2.1.x and Ubuntu uses 2.2.x but just shouldn't be too much of a problem. (I can copy the mail folders from a backup to the .evolution directory.)

2-My /home partition uses ext4. Is using this on Centos 5.5 "looking for trouble"?

View 10 Replies View Related

CentOS 5 :: Upgrading From 5.3 To 5.4?

Nov 11, 2009

Is i possible to upgrade from a point release, like 5.3, to another point release, like 5.4, using yum ? Or, even if it is possible, is it better to just do an install of 5.4 and choose the upgrade option on top of my 5.3 installation ?

View 3 Replies View Related

Server :: Upgrading From Centos 5.6 To 6

Jul 18, 2011

how to upgrade from centos 5.6 to 6?

View 14 Replies View Related

CentOS 5 :: Yum-updatesd After Upgrading To 5.3?

Apr 16, 2009

I recently upgraded from centos 5.2 to 5.3 ( using yum) two desktop computers with a similar configuration (different hardware but similar software configuration). In both cases I saw that yum-updatesd has stopped working. The daemon start at boot and remain silent for a while (an hour or more, without signaling the presence of any update package) then suddenly the process dies without any messages in the log. Using lsof i saw that the daemon open a lot of file and library, but it newer try to connect to any repository.Now i have just launched it in foreground and debug mode (yum-updatesd -f -d) and i'm waiting for some useful debug messages.. Has someone had a similar experience ? What else can i try ?

View 2 Replies View Related

CentOS 5 :: Upgrading PHP5.2 To 5.3 Through Tar.gz?

May 11, 2010

want to upgrade php from 5.2 to 5.3 it can be possible with RPM and YUM but i want to know step by step how it can be upgraded using tar.gz file of PHP and from where i can download it.

View 1 Replies View Related

General :: UPgrading Gns3 0.6.1 To 0.7 On Centos?

Apr 7, 2010

identifying the upgrade path from gns3 0.6.1 to 0.7. I need to know all the packages that are need please and where to get them, plus cli command.

View 1 Replies View Related

Red Hat :: CentOS 5.4: Upgrading From MySQL 5.0 To 5.5 Safest Way?

Sep 8, 2010

I'm running MySQL 5.0 on a production server and I require to upgrade mysql to version 5.5 to get a new collation support. What is the best procedure to follow? I cannot find MySQL 5.5 on the standard repositories. A yum install would be the safest, correct?

View 2 Replies View Related

CentOS 5 :: Upgrading To 5.4 Has Thrashed GNOME/KDE/X

Nov 10, 2009

Yesterday I upgraded to CentOS 5.4 on x86_64. Now I can not login to GNOME or KDE. How do I go about diagnosing this? I am completely out of my depth.

View 12 Replies View Related

CentOS 5 Server :: Downgrade After Upgrading To 5.4?

Nov 18, 2009

I had a 5.3 CentOS server running beautifully. I upgraded to 5.4 for the improved power managment on my hardware, as well as improved network drivers. Unfotunately upgrading from 5.3 to 5.4 completely breaks vmware server 2.0.2.[URL]..

Unfotunately the downgrade of glibc is still resulting in unstable performance. Is it possible for me to downgrade to cent os 5.3 without re-installing the operating system? I'm really stuck here,

View 6 Replies View Related

CentOS 5 :: Php Stopped Working After Upgrading To 5.6?

Apr 9, 2011

After upgrading to 5.6 I was trying things out and noticed for some reason the php on my server has stopped working. Anybody have a clue what's wrong ? I did read the release and it did mention the upgrade would then change my php.

View 12 Replies View Related

General :: Upgrading From Fedora Core 7 To CentOS 5.4

Jan 19, 2010

I need to upgrade one of our systems from its current distribution, Fedora Core 7, to the most recent version distribution, release 5.4, of the CentOS operating system. Can I do an in-place upgrade of the operating system without any adverse side-effects? Are there any issues that I should be concerned with before proceeding?

View 10 Replies View Related

CentOS 5 :: Upgrading From 5.3 To 5.4 Via Yum Produces Perl Errors

Oct 26, 2009

When using YUM UPDATE from the prompt more than 230 items are scheduled for update however when the download process has completed I receive errors regarding Perl dependences such as:

file /usr/lib/perl5/5.8.8/List/Util.pm from install of perl-5.8.8-27.el5.x86_64 conflicts with file from package perl-5.8.8-18.el5_3.1.i386

I am unsure how to overcome this. It occurs on two different servers.

View 7 Replies View Related

CentOS 5 :: Upgrading From 5.5 To 5.6 - Conflicts With File Error

May 13, 2010

I issued "yum update" and the process ended with a transaction check error(see below).
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test

Transaction Check Error:
file /usr/share/backgrounds/images/default-5_4.jpg from install of oracle-logos-4.9.17-6.noarch conflicts with file from package desktop-backgrounds-basic-2.0-41.el5.centos.noarch
file /usr/share/backgrounds/images/default-dual-wide.jpg from install of oracle-logos-4.9.17-6.noarch conflicts with file from package desktop-backgrounds-basic-2.0-4
[code]...

I installed Oracle Database on this server few months ago. I see in /etc/yum.repos.d directory a public-yum-el5.repo file with entries pointing to Oracle which must have come from that installation. Now how do I proceed from here?

View 2 Replies View Related

CentOS 5 Server :: Upgrading To 3.3.1 - Acquire SpamAssassin RPM

Jun 23, 2010

Due to all the "fun" I had upgrading spamassassin from 3.2.5 to 3.3.1 on C55 I thought I would detail it here so as to possibly save others from all the frustration I have endured. There are probably a zillion different ways to make this work but this is how I did it and it seems to work well.

1) Acquire spamassassin rpm.
I downloaded several different versions from various sites and had problems with all of them so I ended up grabbing the SRPM from Fedora 13 spamassassin-3.3.1-2.fc13.src.rpm. This of course will not load onto C55 as rpmbuild has changed so I loaded it onto a FC13 box and then TARed the SPEC & SOURCES directories, copied them onto a C55 and built SRPM from there.

2) Install on C55
The new spamassassin requires several updated packages to make it happy.
a) perl-Mail-DKIM greater than 0.31. I cheated and used this one from FC8 perl-Mail-DKIM-0.32-3.fc8.noarch.rpm
b) perl-socket6 that is 2.0 or later. I got this one from DAG perl-Socket6-0.20-1.rf.x86_64.rpm
c) perl-NetAddr-IP that is 4.0 or later. Again DAG saved the day perl-NetAddr-IP-4.007-1.rf.x86_64.rpm
d) the spamassassin of course :)
Actually I built them from the SRPMs as I needed both the 32 and 64 bit packages for various servers.

3) Run sa-update --D to get the latest rules then restart the spamassassin service. For those who do not have access to a FC13 box you can get a copy of the SRPM I made here [URL].

View 1 Replies View Related

CentOS 5 Server :: Some Pages Blank After Upgrading To PHP 5.3 / Fix It?

Jul 28, 2010

I installed PHP 5.3 from remi repository and now some PHP pages end up as blank pages. Joomla pages load with no problem but iDevAffiliate pages end up as blank pages. Could it be something in the php.ini file? I have no idea where to look. Any ideas?

P.S.: I run CentOS 5.5 and MySQL 5.1

View 4 Replies View Related

Software :: Upgrading / Installing OpenSSL 1.0.0d From Source On CentOS 5.5

Jun 26, 2011

I find my self abit stuck upgrading OpenSSL to the latest version. The situation is that i've been running LAMP servers just fine by installing the web services from the repositories AND the web services from source. However im now in the process of making a PCI-DSS compliant server LAMP server. I've just had the vulnerability scan report back and its failed due to the OpenSSL having vulnerabilities and it tells me I must upgraded to version higher 1.0.0d.

I've basically spent hours and hours trying to get this working along with research but I dont seem to be having much luck with this one

Im using a fresh install of CentOS and trying to create a RPM using the source code and rpmbuild, I read this was the best way I read, and this is my first time using rpmbuild.

Code:
yum -y install rpm-build make gcc gcc-c++ perl mlocate
cd /usr/src/
wget http://www.openssl.org/source/openssl-1.0.0d.tar.gz
updatedb
tar -zxf openssl-1.0.0d.tar.gz openssl.spec

[Code].....

View 11 Replies View Related

CentOS 5 :: Hyper-v Cannot Start After Upgrading Kernel Via Yum Update

Dec 19, 2009

I have 2.6.18-164.2.1.e15 running on Hyper-v. I did yum update and noticed that kernel is upgraded to 2.6.18-164.9.1.e15. If I try to boot into the new kernel it hangs with message first "switchroot mount failed" and then "kernel panic". This is probably related to Hyper-v drivers installed in the old kernel. First question: Do you think this is correct? Is it possible to somehow disable Hyper-v drivers so I can boot into the new kernel and then reinstall drivers? There is nothing in Microsoft documentation about uninstalling Linux Integration Components.

View 9 Replies View Related

CentOS 5 :: Upgrading RAID5 Array With Larger Drives?

Feb 17, 2011

I have a CentOS 5 based Linux system with a 3Ware 9550SU RAID card and four 500GB drives set up in a RAID5 array (3 in the array and 1 hot spare).

I want to 'replace' these drives with four 2TB drives without data loss. My server case has a total of 8 drive bays all hot-swap and all attached to the RAID card, this means I have four empty drive bays on the RAID card.

One thought is to put the four new 2TB drives in the empty drive bays, configure them in a new RAID5 array. Then the question is now to I "mirror" the original RAID5 array over to the new one?

This is just a thought though, I am not sure it will work. In short my question to this forum is how do I accomplish this upgrade?.

View 4 Replies View Related

CentOS 5 :: Create A Workflow For Upgrading Various Systems Using Kickstart?

Mar 18, 2011

I am trying to create a workflow for upgrading various systems using kickstart. I was hoping folks can point me in the right direction.I have a system which already has Centos installed on it. However it is a stripped down version of Centos using a custom kickstart installer. Now I would like to upgrade these systems, using an updated kickstart file spec. I would like to be able to copy over required files into a partition on the system, make a change in the grub.conf, reboot the system and expect the system to use the kickstart file and the iso file located on a partition on the system to self upgrade the entire system.The partition which holds the iso on these systems may be raided, or it may be an LVM partition.

How do I specify in the kickstart file that the location of the iso is on an LVM partition? Is this even supported? I have tried specifiying the disk like so:

< -- isolinux/ks/harddrive.cfg -- >
upgrade
text
harddrive --partition=mapper/VolGroup00-LogVol02 --dir=/isolinux

[code]...

But the installer did not seem to like it. Instead of the iso, can I put the entire tree instead? Would that work?

View 8 Replies View Related

CentOS 5 :: Default Configuration Options For Upgrading And Recompiling Apache?

Oct 23, 2009

I'm currently upgrading my clients' CentOS 5 installation to use httpd-2.2.14 as we need it for the server to past some of the Hardware checks used in the PCI [Payment Card Industry] security test. I was basically wondering if anyone had the standard CentOS 'configure options' for building httpd/Apache so I could copy them to ensure it is a straight replacement for my existing 2.2.3?

[Code]...

View 1 Replies View Related

CentOS 5 Hardware :: Upgrading ServeRaid Drivers For IBM X3550 And 3550 M2

May 21, 2011

I am having a problem installing SR drivers for my IBM x3550 and x3550 M2 servers that have CentOS 5.x

The files I am using are:

ibm_dd_mptsas_4.22.80.04_rhel5_32-64.tgz
ibm_dd_aacraid_1.1.5.24702_rhel5_32-64.tgz

It seems it is asking for kernel-xen-devel

1. Am I using the correct files?

2. Is it safe to install kernel-xen-devel?

View 1 Replies View Related

Ubuntu Installation :: Warning When Upgrading To 10.04 \ "Upgrading May Reduce Desktop Effects, And Performance In Games And Other Graphically Intensive Programs?

Sep 29, 2010

i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is

View 4 Replies View Related

CentOS 5 Hardware :: Intel Graphics Driver Driver Upgrading 5.4 To 5.5 I386?

May 16, 2010

i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....

and i solved the black screen problem changing the driver for i810

Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection

View 2 Replies View Related

CentOS 5 Hardware :: R- Upgrading Kernel Only To Get Hardware Support

Oct 28, 2009

i have recently bought a system which has intel atom and my Lan card hasn't been installed on the system, i am using centos 5.2, i have read in some articles that Centos 5.4 directly support this LAN Card,so will upgrading the kernel for the Operating system help, or i have to download the whole iso for 5.4 and install it over the existing if upgrading the kernel will help which file i need to download to upgrade the kernel and where can i download that file.

View 3 Replies View Related

Ubuntu :: Distrobution Known For Its Compatibility?

Apr 28, 2010

I have an e-machines flat pannel monitor and I often find it's not supported. That, or I have to use 800x600 resolution. I'm on XP right now on a compaq and I have to settle with 1024x768. Which is stretched out. I also use a linksys USB adapter for internet and it must work with-out effort on my part. It works with the latest versions of ubuntu, puppy, Damn Small Linux and a few others. Are there any distros that might work for me? And by the way, I get the correct resolution (I can't remember what it is) with my e-machines W3052.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved