Has anyone ever managed to get SCO binaries to run under Centos 5? I have an application which runs on SCO and SCO is becoming difficult to support so I want to copy the binaries over onto Linux and run them.
View 2 RepliesI am facing problem on executing commands like df -h,ls-l,grep etc in /bin.
it is showing below errors:--
----------------------------------------------------------------------------------
login as: root
root@220.226.102.217's password:
Last login: Sat Jun 4 11:14:20 2011 from 220.227.54.149
-bash: /bin/egrep: cannot execute binary file
[code]....
what scanner to buy to work out of the box with Ubuntu 10.04 LTS
View 7 Replies View RelatedIs there any Linux utility to combine two or more binary files into a single binary file ?
View 7 Replies View RelatedIs itunes compatable with fedora 14?
View 2 Replies View RelatedHow to coded version info and other information likes author and company name into the ELF binary?
I prefer the put the version info during build step.
edit unzip binary file to fix a security issue with cpanel?i tried hex editior but i canot understand the file codes!iam a basic php scripter and pwn but i canot understand this its just numbers and strange characters!......................45..................5......@#........ like this
View 1 Replies View RelatedHi i am looking at buying a ASUS K52JR-SX052X i3-350M 2.26GHz, 4GB, 320GB, 15.6" WXGA LED, HD5470M 1GB, 11N, BT. or a ASUS G51JX-HD-SX232V i7-720QM, 1.6GHz, 6GB, 500GB, 15.6" WXGA LED, GTS360M 1GB, BT.
I know there can be issues with graphics cards and would like to know if anyone has a site that i could look at to see if these cards work with Ubuntu 10.04.
Getting tired of just staring at my web browser..
View 4 Replies View RelatedRecently when emailing my resume in openoffice .doc format some recipients are complaining that it is unreadable. This is bad for obvious reasons. I have no idea what is going on in the ms windows/office world. I run linux exclusively.
If I can't use openoffice formatted resumes, does anyone have suggestions for sending a resume that most recipients can read?
Ubuntu 9.10 karmic - 2.6.31-21-generic kernel Openoffice.org writer 3.1
When I do a yum or an initial load of vsftpd, I get binary that works. I got the source file "vsftpd-2.0.5-12.el5_3.1.src.rpm" from [URL] to make a change to add chown_upload_mode to version 2.0.5
With no changes to the source, the program works but does not respond to the service command properly. See [URL]
How do I get the source of vsftpd that matches the binary distribution?
I'm going through a tutorial here to help me know how to wander around my system in the terminal and just understand better on a general level.
I'm trying to simply figure out how to compile and run some software from source. I get to my directory where the then installed binary sits. I understand I'm supposed to enter in the command:
Quote:
./units
where 'units' is the name of my binary. But I then get the output:
Quote:
units: can't find units file '/usr/local/share/units.dat'
...what? Why does it refer to that directory that's WAY out there? It seems like it's trying to outguess me on something? I don't know. Anyone out there that does? I'd appreciate an explanation, and help to know what to do to run this binary.
Is it possible to convert/recompile an already compiled x86 binary into an ARM binary?I'm using a BeagleBoard with a command-line Ubuntu (Maverick) and want to run a Ventrilo server but the x86 executable they supply cannot be run on the hardware as far as I can tell (most likely due to differing architecture).Unfortunately I don't have access to the source to allow me to recompile it natively.
View 3 Replies View RelatedIs there a command that can tell me which binary actually executes for some program name? "whereis" seems to do something different.
Specifically, I am trying to hunt down and kill a python 2.6 installation that just won't die.
whereis just seems to be returning anything with "python" in its name, but I want to know which binary thinks it is python 2.6.5. (By the way, I've tried all the above manually, and it isn't any of them)
I am trying out an open source software According to its installation instruction, "Linux users with an x86 compatible platform can use the frozen package for a quick installation (Just unpack the tar file in directory an start the faces binary). "So I just did it and unpacked it. However, when I click on the application file, which is named "faces", nothing happens. I'm new to Ubuntu so I'm not sure if there is anything that I should do before I can click and run an application like this?
View 4 Replies View RelatedI am learning C++ and wish to include some Boost functions in my code. My machine is running Debian Linux with the pre-installed boost binarys.I have a couple of questions:How do I include the library in my C++ code as there are no cpp or h files only binary files (eg /usr/lib/libboost_regex-d.so and /usr/lib/libboost_regex-d.a)How do I comile the code. I am using DialogBlocks for creating forms using wxwidgets. The editor also compiles the code using the gcc compiler. Do I have to give an instruction to the compiler saying which file is requried and where to find it? If so, any ideas how this is done?
View 4 Replies View RelatedI'm trying to autodetect if certain applications (for example, Firefoxre running. I figured the easiest way would be by checking process names.
View 2 Replies View RelatedI need to change the functions of some linux commands. We can't edit the binary files provided in /bin, is there any other method other than alias.For ex. - I need to change the function chmod so that it takes only three consecutive integers as input (chmod 777 filename) and nothing else ? Do I have to write by own code for it, or is there any other alternate method.
View 2 Replies View RelatedIn a DOS prompt, I would like to ftp ASCII get a file from a Linux machine. The file was created in vi, just a normal text file.in DOS prompt:
Code:
ftp> ascii
200> Switching to ASCII mode.
[code]...
I have written a c program. And compiled it to make a binary. Now when i try to call this binary from php page, it is not being executed.
View 14 Replies View Relatedi have some files name libbeet.so.3.02 , libpos.so.3.04.I think all is binary files , but i am not able to see the contain of file.is there any script to read the file contain.
View 5 Replies View RelatedI have a binary value which I receive from a controller. Say this binary value is 42. Just plain hex 42. If you would look at that byte in a debugger you would see 42.Now this value hold 8 bits each indicating a high or a low output. So 0x42 = 01000010b. Which means bits 1 and 6 are '1'.When I would want to find out which bits are set and which are not in a language like C, I simply do:
Code:
mask = 0x80;
if (binval & mask) {...}
etc..
However I am programming in TCL, and I try to do:
Code:
set mask 0x80
if { [expr ($binval & $mask) > 0] } {...}
etc...
this fails. At the moment the expr is executed, $binval is evaluated and substituted so the expression I am evaluating is
Code:
set mask 0x80
if { [expr ('B' & '0x80') > 0] } {...}
etc...
Eventually I got it working by converting the $binval into a '0x42' string value, like this:
Code:
binary scan $binval c byte
set byte [format "0x%0x" $byte]
set mask 0x80
if { [expr ($byte & $mask) > 0] } {...}
etc...[
Then the expression yields what I want. But this seems so stupid and clumsy. Isn't there a better way where I can compare two binary values without conversions?
[b] i got downloaded qt-sdk-linux-x86_64-opensource-2010.02.bin binary file then how to install that one[]
View 5 Replies View RelatedI'm new to Fedora, and haven't used any flavor of Linux in years. I'm attempting to run a few benchmarks that were given to me by my instructor, but every one I try to run gives an error "Cannot execute binary file". For instance,.inp.inThis command gives an error:bash: ./Mcf: cannot execute binary fileIt is not a permission problem, I have confirmed the file has execute permissions (one of the things I still remembered after all these years). I suspect all the benchmarks I have been given were compiled on Ubuntu. Would this be causing the problem? I do not have access to the source code, so I cannot recompile. If that is the problem, is there a way around it that doesn't involve throwing away a weekend and starting fresh on Ubuntu?
View 1 Replies View RelatedI found a Linux .x86 binary file that I've been looking for, but not sure what to do with it. Does this (*.x86) binary file format seem like something that could simply be run by command, or something that would need to be compiled first? There is not much information that I could find regarding the particularly file.
View 11 Replies View RelatedI've been trying to launch a binary file, but I keep getting this error.
Code:
[csegale@localhost pSX]$ ./pSX
[src/linux/sound.cpp, line 215]: 'snd_pcm_hw_params_set_access(pcm_handle,hwparams,SND_PCM_ACCESS_MMAP_INTERLEAVED)' returned 'Invalid argument'
[Code]....
Is there a binary available somewhere, even if it's a non-Fedora repo?
View 8 Replies View Relatedwhere I can get a binary package for Kdevelop 3.5.5?
View 4 Replies View RelatedTrying to setup a new Ubuntu machine and just downloaded 'p4' (Perforce command line client). It's a single file download - a statically-linked binary executable, so I just did:
wget [URL]
...right into /usr/bin. Simple enough. Except:
root@aj-ubuntu:/usr/bin# ll p4
-rwxr-xr-x 1 root root 748808 2010-02-11 16:54 p4
root@aj-ubuntu:/usr/bin# ./p4
[Code].....
I'll be using a specific example, but really this generalizes to pretty much any binary on linux that can't seem to find its' dependent libraries. So, I have a program that won't run because of missing libraries:
./cart5: error while loading shared libraries: libcorona-1.0.2.so: cannot open shared object file: No such file or directory
ldd sheds some light on the issue:
linux-vdso.so.1 => (0x00007fff18b01000)
libcorona-1.0.2.so => not found
libstdc++.so.6 => /usr/lib/gcc/x86_64-pc-linux-gnu/4.4.3/libstdc++.so.6
[Code]....