Networking :: Won't Find Ethernet Cards

Sep 15, 2010

I am writing a new lightweight Linux distibution mainly for educational purposes. I have a problem; it won't find any ethernet cards. I have tried enabling several things in the kernel config. What I would really like to know is how to enable some generic ethernet drivers and therefore networking. I would like to avoid having to use modules. I'm using kernel version 2.6.35.1.

View 9 Replies


ADVERTISEMENT

Hardware :: Couldn't Find Drivers For Ethernet Cards

May 30, 2010

I'm looking for drivers for a some ethernet cards: 02:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec: 8139] (rev 10) Macronix, Inc. [MXIC] MX987x5 [10d9:0531] (rev 25) and Dlink dfe-538tx

I found some drivers at: Realtek These are for the Realtek card. They are: UnixWare 7.1.x and SCO Unix 5.0.X Which one would I use for Debian Lenny? I couldn't find any for the Macronix I found this site for dlink: ftp://ftp.dlink.com/NIC/dfe538tx/Driver/Linux/

[Code]...

I'm not sure what to do with the dlink. I'm not familiar with Linux drivers. I don't know if this is the right way to go or if there are drivers for linux already.

View 3 Replies View Related

Fedora Hardware :: Many Ethernet Cards - Find Vendor / Model - MAC Address ?

Oct 7, 2010

How can I determine full compliance:

Input data see below.

Code:

Code:

Code:

Result - ethernet devices about which I know the exact information :

Code:

View 3 Replies View Related

Networking :: Can Use 2 Ethernet Cards For Green Network In Ipfire?

Jul 5, 2010

Ok, so I've gotten tired of my router, and I've decided to make my own using IPFire as the OS. Right now I'm looking for ethernet cards that I can use for the green network, but I don't know if I can use 2 for the same network. I'm trying to get 4 ports at 1000 Mbs, and the only thing I've been able to find so far that's within my price range is a card from startech that has 2 ports, but would I be able to use 2 for the green network?

View 3 Replies View Related

Ubuntu Networking :: 9.0.4 - Supported Ethernet Cards That Work Flawlessly?

Apr 29, 2010

I'm running Ubuntu 9.0.4 with an Intel PRO/100 VE Network Connection. I have been trying for a couple weeks now different techniques to get my wired ethernet connection working properly. I have a seeming common issue with my e100 driver dropping connection and having hard time picking it back up sometimes. I want to purchase a relatively inexpensive Ethernet card whose generic Linux driver actually operates it CORRECTLY, open up comp and put it in, and update to 9.10. Any list of Ethernet cards that are know to work flawlessly on Ubuntu, or at least tell me which card YOU are using that works perfect without having to write code, install wrapper programs, etc...?

View 8 Replies View Related

Networking :: 2 Ethernet Cards Prevent Recognition Of Wireless Card?

Apr 3, 2011

I have two motherboards, MSI-6702 (64 bit single channel) and MSI-7511 (64 bit dual channel), I have two identical D-Link wireless cards and am running Kubuntu 10.10 on both systems. 7511 recognizes both wireless cards and connects to the Internet.The 6702 shows wireless grayed out on the connections page. The built-in Ethernet card has given out on both. I think I disabled it on the first system to have an Ethernet problem and wonder if I need to do it on the second. I would have tried it already but can' t remember how.

View 2 Replies View Related

Ubuntu :: Ethernet Cards Not Connecting?

Mar 9, 2011

i have ubuntu 10.10 64b and for some reason last night the wired network autoeth01 suddenly will not connect to my router. it is a dual boot machine so i booted into windows and it is working fine in that OS.

I then had a look at the status on my laptop running ubuntu 10.10 32b and that was showing the same message "wired network autoeth01 disconnected" i cannot for the life of me figure this out. just before it was disconnected i had been copying 7gigs worth of data using samba from the 32b machine to the 64 bit machine.

i have tried deleting the wired entry and recreating it.

tried different cables

even changed the router

works with all windows machines connected to network

here is what comes up in lfconfig:

jason@ubuntu1:~$ lfconfig
No command 'lfconfig' found, did you mean:
Command 'fconfig' from package 'redboot-tools' (main)
Command 'ifconfig' from package 'net-tools' (main)
Command 'ldconfig' from package 'libc-bin' (main)

[Code].....

View 6 Replies View Related

General :: How To Setup Two Ethernet Cards

Sep 6, 2010

How to setup two Ethernet cards ,one with public ip address and the other with local ip address.

View 4 Replies View Related

OpenSUSE Install :: 11.2 Not Recognizing Some Ethernet Cards

Jan 5, 2010

I've installed OpenSUSE 11.2 on my computer. Well, 11.2 is great and all, but issuing ifconfig yields only loopback device. Now, I have OpenSUSE 11.0 installed on my notebook; the system works fine, although I had that very problem initially and had to recompile the kernel in order to make it recognize my notebook's ethernet card. My question is: If I upgrade my notebook's 11.0 up to 11.2, am I sure to have my files intact? Is 11.2 sure to "see" the ethernet card?

View 2 Replies View Related

Server :: Configure Two Ethernet Cards With The Same IP For Redundency?

Jul 20, 2010

how to configure two Ethernet Cards with the same IP for Redundency and Load Balancing?

I appriciate if you spare some time on replying by above query.

View 1 Replies View Related

Slackware :: 2 Ethernet Cards Using The Same Driver As Module?

Oct 11, 2009

i have 2 nic's that use the same 8139too module to be operated.so in order to run them i added in /etc/modprobe.d/a file with 2 aliases for the 2 nics alias eth0 8139too alias eth1 8139too and I added a udev rule to give the name eth1 to the 2nd card (the 1st card already had a rule) i still don't get the 2nd rule to be brought up automatically at start up... ifconfig only returns 'eth0' and i have to manually do 'ifconfig eth1 up' at which time the interface is brought up nicely.. then i do a dchpcd to get a network address and im all set. but i would like to do this automatically... note that i know that if i add static ips in /etc/rc.d/rc.inet1.conf i will get both ifs up... but i wonder how its gonna happen with the 2nics being 2 dhcp clients.

View 5 Replies View Related

Debian :: Local DHCP Server With Two Ethernet Cards

Jul 5, 2015

I recently bought a used Server (FSC RX200 S4) and set it up running Debian 7. Being used to Ubuntu, that was no big deal. It works as it should out of the box. This magic computing machine has four Network cards (eth0 - eth3). Now, I want to set it up as a multi-purpose server. On the one hand, it shall provide a Apache2 webserve, a SQL Server, a File/Streaming Server and so on. I have no problems setting up these.

On the other hand, it should work as a DHCP server in my local lan with some PCs and a printer/scanner. Until now, my cheap router did that job including to connecting me to the internet. Since I can't really set up a proper firewall with that box, I want to use my server for that.

Thats's my desired setup I want to achieve:
[] Router provides internet connection to Server
--> cable goes into eth0
[] Server therefore has a internet connection
--> Some internal magic routes the internet from eth0 to eth1 (preferably as a iptables setup) and does the Firwall & DHCP Service
--> cable goes from eth1 to a switch
--> switch connects the PCs and printer
[] PCs have internet and I can use the printer

So far so good, here's what I've come up with. I installed dnsmasq and isc-dhcp-server. I got some config files for both. I got a script to set up my iptables

Iptables script:
Code: Select all#!/bin/sh
#
# rc.firewall
# firewall with iptables ... stronger version
#
FWVER=0.88s

echo -e "
Loading STRONGER rc.firewall - version $FWVER..

[CODE].....

When starting up the services, I don't see any errors. Still, it doesn't work. My Server loses its internet connection and the PCs connected to the network are unreachable.

View 1 Replies View Related

Software :: Unable To Activate Ethernet Cards In Fedora 10?

Oct 31, 2009

I have Installed Fedora 10 and I have assigned manual IP address to eth0 and trying to activate the eth0 but all buttons are disabled.

View 2 Replies View Related

Ubuntu Networking :: Find A Device Connected Via Ethernet?

Nov 12, 2010

I have a device (not a pc) connected to my pc via ethernet, it dose not show up in networks, I was hoping there was a way of scanning to detect for it, is there a way of seeing content of it is basically what I'm asking?

View 5 Replies View Related

Ubuntu Networking :: 10.04 64bit - Cannot Find My Router Even Via Ethernet

Jan 16, 2011

I recently installed Ubuntu via "wubi", and tried to set up the Wireless. After looking at a few threads, they suggested using an Ethernet cable to troubleshoot the problem. However, my laptop does not detect the router even via an Ethernet cable. I am running 64 bit(It auto-downloaded with wubi) on an Acer Aspire 5553G, and my router is a Netgear DG834G. I have an Atheros AR8151 PCI-E Gigabit controller, a Broadcom 802.11n Network adapter and TAP Win32 Adapter V9.

View 1 Replies View Related

Networking :: Find A MAC Of Hardware Attached Via Ethernet Cable?

Apr 19, 2011

How can I find a MAC of hardware attached via ethernet cable? I have been working nicely with an industrial scanner that is controlled by a Linux PC via an ethernet cable, but the hard drive has died I need to get it working again. The problem is that the main PCB has a Realtek RTL8019AS ethernet controller chip: [URL] which I believe is used in the most basic way possible, applied straight off-the-shelf and unconfigured. To utilise the chip ARP commands are used to assign an IP address to the chips MAC address e.g. something like:

arp -s 192.168.2.5 00-05-a4-00-a8-f8

Unfortunately the actual MAC address was lost along with the HD Th only thing I could have a reasonable guess at is that the chip will have a default subnet of 255.255.0.0 or 255.255.255.0

View 5 Replies View Related

Ubuntu :: Share The Wireless Network With Old Lap Top Via The Wired Ethernet Cards

Mar 25, 2011

I want to share the wireless connection from an Ubuntu machine with an old lap top via the wired Ethernet cards. the old laptop doesn't have wire less. the Ubuntu machine is 10.04 LTS -the Lucid Lynx.

View 1 Replies View Related

Ubuntu Networking :: VMWare Workstation 7 On 9.10 - Can't Find Ethernet Device

Aug 29, 2010

I just upgraded to VMWare workstation 7. I was previously running v.6, and an older linux version, and everything was working fine. I moved over the same VM files to the new computer, and it doesn't find the ethernet connection. When I start up the virtual machine, I get an error message:

Could not connect Ethernet0 to virtual network "/dev/vmnet8". More information can be found in the vmware.log file.

There log file doesn't say much more:

Jan 07 17:31:36.928: vcpu-0| VNET: MACVNetPortOpenDevice: Ethernet0: can't open vmnet device (No such device or address)
Jan 07 17:31:36.928: vcpu-0| VNET: MACVNetPort_Connect: Ethernet0: can't open data fd

[code]....

Once xp has booted, I get the "new hardware" wizard, saying that it found an ethernet adapter. However, it can't find any driver for it. I think this dialog started appearing after I added a new virtual network entry using the "Virtual Network Editor". Originally I didn't even have a /dev/vmnet8 file. Now I do.

View 2 Replies View Related

General :: Build Broadcom Netlink BCM5787M Onboard Ethernet Cards (x2)

Apr 13, 2010

I would like to get my Slackware 11 to work with the Broadcom NetLink BCM5787 onboard Ethernet Cards (x2). I have downloaded the tg3 driver from the Broadcom site. I copied and extracted the driver onto the Linux harddisk. When I wanted to build it I got the message, tg3_compat.h: error : redefinition of 'msecs_to_jiffies'previous delay.h : error: definition 'msecs_to jiffies" was here"

View 3 Replies View Related

Fedora Networking :: Ethernet Connection Stopped Working - Cannot Find Server

Jul 23, 2009

After using fedora 11 for a month or two now the ethernet gave out on me tonight. However if I switch to my ubuntu or windows XP install it runs fine. I made no recent changes to network connections, and no installed programs that should effect it.

kernel version: 2.6.29.6-213.fc11
default connection: eth0(and only connection)
ifcfg-eth0:
# Networking Interface
DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:1F:C6:DB:05:0C
ONBOOT=yes
TYPE=Ethernet
IPV6INIT=no
USERCTL=no
NM_CONTROLLED=yes
NAME=eth0
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
DNS1=192.168.1.254
PEERDNS=yes
PEERROUTES=yes

I have tried, restarting, older kernel, restarting services, and clearing the DNS Cache. The specific error I get is that "Firefox can't find the server", and most other applications return similar. I can however ping websites still. All other computers on the network are running fine, and booting into another system the internet will work. Just not for fedora.

View 14 Replies View Related

Networking :: Unable To Find Atheros AR8132 PCI-E Ethernet Controller Driver For CentOS / Fix It?

Jun 26, 2011

I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.

I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.

I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.

NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7

When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .

View 4 Replies View Related

Ubuntu Networking :: User Interface Changed And It Defaulted To Ethernet And Now It Won't Letting To Go Back On Wireless - Disable Ethernet?

Sep 1, 2011

My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?

View 4 Replies View Related

Hardware :: Find Sound Cards MIDI Capabilities?

Aug 27, 2010

I have an internal PCI sound card, and I would like to find out what MIDI capabilities it has, if any. It is currently using the ens1370 ALSA driver. It has the standard Line in, Line out, and Mic jacks, as well as what appears to be a game port. I think it has some MIDI capabilities, because "cat /dev/snd/midiC0D0" does not fail with "no such device or address," but I don't know if it has MIDI input capabilities, or if it can synthesize, or what. Is there any way to tell?

View 4 Replies View Related

Ubuntu Servers :: Dns Server Started With 2 NIC Cards - Bios Sees Both Cards But - Both Dont Show In Ifconfig

Dec 1, 2010

I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?

View 1 Replies View Related

Debian Installation :: CD Cannot Find Ethernet Card?

Aug 27, 2011

I'v just brought a notebook computer with a CPU i7 2630QM. I install debian 6.0.2.1 via CD driver, but it failed to success. The probles are three, (1).it reported "cannot find ethernet card" ; (2). It reported "cannot install continue" after the diskpartion step have been successed; (3). It said "netinstall may be a choice", so I say "Yes" and It really downloading something (543 files) and successed . After reboot, I loggin and cannot link to the internet. There is no such files ralated to netware config and I'm not able to config that, for I'm always only a bar finder in an meau.(shy a little,but this is ture). I do it 4 times and the situation and results are the same that I got a smallest netinstalled debian system on my computer and I cannot play music, cannot link to internet. I wonder: How could I install a real debian on my computer? Need I download anther version of iso file or do something that I do not know to makes it works. I can burn an iso image to a real CD by my old computer. I can also install OS such as mint via USB flash drive. In the computer Highly-Orangized world (already-wisdomed world), I have a body already but I've never been installed a sprit or a soul. So I really need to learn from you, from the great debian bbs, learn something of vital importance to take me into wise and freedom.

View 8 Replies View Related

OpenSUSE Hardware :: Can't Find Ethernet Driver For Lenovo T410

Jun 8, 2011

I have a Lenovo T410 laptop. I'm unable to find drivers for the ethernet card, the wireless card and graphics. I don't even know what hardware is installed in the system. Here is the product ID if it can help in identifying the hardware.

Product ID : 2516CTO

View 9 Replies View Related

Hardware :: Unable To Find Atheros AR8112 Ethernet Driver?

Apr 9, 2010

I have a PCCHIPS P47G motherboard, with a Atheros AR8112 ethernet interface (took me a while to even find that out!). I can not find a driver for that interface! I've Googled around for drivers and come up with nothing.

View 1 Replies View Related

Ubuntu Networking :: Using 4 NIC Cards?

Jul 13, 2011

I am setting up a class using a vmWare ESX server. Because of security proceedures, the students are not allowed to connect directly to the internet. Because of file space, the are severated on 3 servers. I am trying to set up a server that connects to the internet and all 3 subnets that the students are on.

I have configure 4 virtual NICs 1 with DHCP connected to the internet. The other 3 goes to each student network. I can get 2 working at a time. 1 using the DHCP and 1 of the other networks. It seems to be order dependent. On the main server I can ping the local address. When I ping the students systems, I can reach 1 but not the other 2. I get a host unreachable message.

Is there a limitation to 2 NICS. If not, is there any magic incantation to run the 4 nics?

View 4 Replies View Related

Networking :: IP Keeps Changing Between Network Cards?

Jul 8, 2010

I have a small pc running fedora 8 with iptables and 2 network cards for routing/firewall and secondary DNS.For some time I've been alerted by the network guys that this machine was generating some alerts. The real network IP address keeps being assigned to the other interface, intended for LAN only (10.0.0.1/24).I've already changed the PC, installed a more recent operating system, replaced the 2 network cards and the problem persists. I have another pc running the same services (except DNS) in a very simillar way and no alert logs from that one.onder if it is some configuration issue on my startup firewall script.I've also installed arpwatch and I could confirm this IP and physical address issue:

Arpwatch output:
hostname: my.host.name
ip address: my.ip.address

[code]....

View 5 Replies View Related

Networking :: 2 Isp On 3 Lan Cards / Cannot Get Internet Packets From The Second Isp?

Jun 7, 2011

we are using Red hat enterprise 5.4 for our internet connection with following ip's

eth0: 192.168.1.2 (local lan)
eth1: 114.143.28.240 (static ip address for 1st isp)
eth2: 192.168.100.149 (2nd isp modem connected with lan cable)

first isp i.e tata internet connected to the internet and working very well

now i want 2nd isp to work when the first isp goes down, i had configured all dns in the resolve.conf and squid.conf, when i switch off the 1st isp for checking that failover is working or not i cannot get internet packets from the second isp.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved