I ran a test where I login a test user several times using the wrong password to see that he gets locked out after several attempts. Now that I got the test user locked out, how do I unlock the test user? I tried passwd -u <test user>, but it says passwd: Error (password not set?).
A while back I don't know what I did but I messed up my root user account and now the password that I think is supposed to be for the account doesn't work anymore.In an attempt to fix it I rebooted and went into recovery mode and then edited the sudoers file. This appears to have been good enough to be me by but now I'm running into problems installing or changing configurations in gnome. For example, I just installed Asterisk via the terminal the other day and had no problems because I could use sudo. But just now I tried installing Gastman via the Ubuntu Software Center and of course it asked for the root password.I entered my usual root password when I use sudo and it doesn't work.
I then went to the terminal and entered sudo apt-get install gastman and it worked fine becuase I used my sudo password for my account. So it seems I can do things just fine via the terminal but when in gnome it doesn't work. I went into the Users and Groups section in Gnome to attempt to set or change the root password but of course I have to unlock the application which requires the root password.
Is there a way to grant 'root' privileges to my user account? My account name ... I'll call it 'masterskop' as it is my forum name here, but not on my computer.Would it look like this in the sudoers' file?My purpose is to get access to all the folders and files in the 'File System'. The root and lost+found folders have 'Xs' on them...No access! And for example, under properties of the 'var' folder it states that 'you are not the owner, so you cannot change these permissions.' How can I get access to all of it everytime I login as the main user of my computer? I do not have anyone else using this computer.I did edit this file and used my real user name ... logged out and logged back in and still I do not have access/edit these folders and files.
I recently made a computer for someone who decided to get a new one instead.. so i thought i'd make a server out of it lk i had it before. so i deleted their account (while on their account) and made me an account.. but now when i try to login to my account it's.. not there? such as when i type my username and pass it says i entered an invalid user/pass. any idea how i can get my user accounts back or atleast logon to this system? i know the root password if there's any way i can login under the root account.
I have lost my password for my root and for my user account.
Code: Select alluser@debian:~$ su Password: su: Authentication failure user@debian:~$ su Password: su: Authentication failure user@debian:~$ su
I have just installed a gust debian 8 on debian 8 host in virtualbox, and when i wonted too login as su/root on the host there where no login possible, is there a way to regain the root password for the host?
My install of 11.4 has been running perfectly for for several weeks now. But- (always a but) today it started acting up. I cannot log in to any user account including Root after logging out. After a cold boot I can log in again anywhere but after logging out I have to reboot again then I can get back in to any account once. After logging out any attempted log in causes the splash screen to blank for a few seconds and then it comes back with the previous successful user name log in but typing in the password blanks the screen a few seconds again. Clicking on a user account also blanks the screen a few seconds and then it again comes back with the previous log in users name.
I just installed opensuse 11.1 with only the standard user account, not root account. Therefore, my question is regarding this ... is safe running linux with no root account? Should I create a root account for adminstrative purposes? If so, how can I do that?
I manage to get my mobile broadband working (connected, I mean) in both root & user account. However, my web browser, IM etc only work in root account.In user, knetworkmanager does show that my Huawei E160G is working fine, connected but I still can't surf the net & chat. I've included the dialout & uucp group for user account but that still doesn't resolve the problem
On a Fedora Core box, I have a normal non-privileged user and I also have sole access to the root account. Because I am the only administrator of this box, I frequently su over to root for administrative tasks. The problem is that many of the user configuration I've become accustomed to are only configured on my day-to-day account (.vimrc, .bashrc, .screenrc, etc). Other than giving my day-to-day user account privileges to perform administration tasks, how would I go about sharing configuration between these two accounts?
Is there a non-root shell command that can tell me if a user's account is disabled or not? note that there is a fine distinction between LOCKING and DISABLED:
LOCKING is where you prepend ! or * or !! to the password field of the /etc/passwd file. On Linux systems that shadow the passwords, this marker flag may be placed in /etc/shadow instead of /etc/passwd. Password locking can be done (at a shell prompt) via password -l username (as root) to lock the account of username, and the use of the option -u will unlock it.
DISABLING an account is done by setting the expiration time of the user account to some point in the past. This can be done with chage -E 0 username, which sets the expiration date to 0 days after the Unix epoch. Setting it to -1 will disable the use of the expiration date.
The effect of locking to to prevent the login process from using a supplied password to hash correctly against the saved hash (by virtue of the fact that the pre-pended marker character(s) are not valid output character(s) for the hash, thus no possible input can ever be used to generate a hash that would match it). The effect of disabling is to prevent any process from using an account because the expiration date of the account has already passed.For my situation, the use of locking is not sufficient because a user might still be able to login, e.g. using ssh authentication tokens, and processes under that user can still spawn other processes. Thus, we have accounts that are enabled or disabled, not just locked. We already know how to disable and enable the account - it requires root access and the use of chage, as shown above.To repeat my question: is there a shell command which can be run without root privileges which can output the status of this account expiration info for a given user? this is intended for use on a Red Hat Enterprise 5.4 system.The output is being returned to a java process which can then parse the output as needed, or make use of the return code.
I'm setting up Ubuntu Karmic on my sister's old computer for my nephew, he's quite young so my sister asked to install some content filtering. I'll first setup an OpenDNS account and I've installed and managed to get dansguardian and squid working on a virtual machine to try it out. so far it's working pretty well, but I need to secure it form the inside out.
I was thinking of blocking specific outbound ports so he could not bypass the proxy. because by default the firefox configuration can be easily changed. so I have a couple of questions.
1. is it possible to block outgoing ports on Ubuntu? 2. is that the best method? 3. is there anything else I should be aware of to prevent subversion?
lastly, this question is probably unrelated to this board but I've set up a cron job to update a dynamic ip with OpenDNS, the problem is that the password is in clear text in the user's crontab, can I play with permissions? is it possible to run the job under a root account and deny read/write access to a normal user?
I'm still fairly new to Suse(and Linux) I have an account on my system that is locked when i run passwd -S accountname i get 'accountname lk' as the response. However when i try to unlock it using passwd -u accountname i get 'Cannot unlock the password for accountname!'.Any ideas on why i can't unlock the account?
I have a problem with the Google search box top right corner in Konqueror, when entering search I recieve an error page "Unsupported Protocol" Google asks for ioslave or kioslave. Also when highlighting text on a page and right clicking with the mouse no search option is given. I created a new user and all works as it should for the new user. What is wrong with my user account? I have reset default values in Konqueror setup.
So I was testing to see what would happen if I tried to open a root shell in recovery mode, WITHOUT having first activated the root-user account (I only installed the system two days ago). I used my ordinary password and was expecting to see something like "Invalid password" or some such message. To my surprise, I got a root prompt. Thinking that this may just be how it works with recovery mode, I tried logging out of my X session and logging back in as root, thinking (or at least hoping) that it wouldn't work. But it did.
I've started to get emails that would typically come from [URL] as [URL]. These emails come from services that send out emails (backup programs) directly, or from cronjobs. I've logged in as the non-root account and either sudo su - or su - to root and the restart the service at one point or another. If I login directly as root and bounce the service or cron the emails come across as from root. I don't see anything in my environment variables after I su to indicate what would cause this. I'm not sure where else to look? A pam setting? This seems to have happened between Fedora 10 and 14 (did a bunch of overdue upgrades recently) I've only got Fedora so I don't have anything to compare to. In Fedora 10 I did not have this problem.
I have a user account which is required to run as part of the operating system and as a service. I am currently attempting to install my companies software on an Ubuntu desktop via wine just for the purpose of finding out if it's do-able.
Is there a way, in Ubuntu, for a user account to be given the local rights assignment to act as part of the operating system and to function as a service in the background?
Is It possible to change a process running in root-user to non-root-user by setting suid / uid / euid / gid etc... I so please instruct how, when and wat to set in order to change a process running in root-user to non-root user