I have nearly 200GB of space free on the HD with my linux main EXT4 partition, and I'm wondering if I can convert a large part of this to a new NTFS partition that I can use for my windows XP paralell install?
Basically, what do I have to do to resize and create the new partition and how do I get windows to recognize it?
I have one computer with windows and one with ubuntu. I have an external drive (FAT32) with files taken from an NTFS (mp3s and such) and I would like to put them and use them on an ext4 ubuntu platform. Can I make a partition of the /home folder NTFS and the system ext4 and function properly? I do have configuration files in the /home folder since Im building a domain controller that utilizes samba on ubuntu: would I be better off using a dual boot with windows/ubuntu and placing the files on the Windows partition? what is my best option?>
I was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
I am trying to restore an NTFS partition from a backup and I need the new drive to have the old (dead) drive's UUID (which I recorded).I really really really cannot use the option of changing fstab to mount using a new UUID, for this case I need the old UUID that existed on the other drive.Is there some ntfs equivalent of tune2fs that'll let me change the UUID on an ntfs partition?
I just installed ubuntu via the windows executable and I couldn't mount my NTFS partition. I found this a little odd and I checked fdisk and it seems to think I don't have an ext4 partition as my entire internal HD is displayed as NTFS.
Here's the fdisk output:
When i try to mount the NTFS partition /dev/sda2 i get the following output:
I can't make heads or tails out of this. Anyone know what's going on here?
Windows recognizes that 30GB were taken from the NTFS partition for my linux install. It reads the max partition size as 465GB. fstab reports the NTFS partition size as 488GB.
I want to change my sda2 partition to ntfs type. i have installed GParted but it is returning a strange type of error. Here is the error dump file...
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
First off let me say that I love working with Ubuntu. It's a great OS to learn Linux on. Now on to my problem. I have a laptop that dual boots. Ubuntu 9.10 x64 and Windows 7 Ultimate x64. Been working just fine. I was using NTFS-Config to auto mount the Win7 partition during startup of Ubuntu. It has been running fine. I am able to move files between the linux partition and the NTFS partition with no problem. Now I've come across a problem. I big problem. Just this week I installed VirtualBox onto Ubuntu. I started creating virtual machines. 6 in all (3 Win 2k3, 1 2k8 and 1 Win7). I was saving the virtual machines to the NTFS drive as this was by far my largest drive. I used a directory titled "virtualbox" under the c:/users/public directory. This setup was working great. Was able to get my vm's patched and up to date. Created several snapshots. Basically I was a happy camper.
Last night I booted into Windows 7. OS started fine. I was just surfing the web. After that I rebooted the system and entered Ubuntu and started Virtualbox. I tried to start a vm and it complained that the virtual harddrive was missing. I checked to make sure that the path was correct for the virtual drive and discovered that the entire virtualbox directory that I created on the NTFS partion was gone!!! Everything else was in place and intact including music and large video files that I had downloaded to the Ubuntu partion and moved the the NTFS partion.
I save these virtual machines???? Should I abandon using NTFS-Config. This is somewhat critical since I had took sometime to create this test lab and to have it disappear from simply booting into Windows 7 is crazy.
Storage information: 1st primary:SG 160G ATA 100 1st secondary:WD 160 ATA 133 SATA:WD 1000 2nd primary:DVD 2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup: 1.Partition list:/boot,/,/home,swap 2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying. I solved the problem by the following way. 1.Boot with windows xp's install CD and use fixmbr on (hd0). 2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1) After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0). 3.Reboot and Press F8 for a boot menu then I can select which disk to boot. windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP Mint Ubuntu-Studio Edubuntu One of the E17 OSs Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I am attempting to put vista onto my laptop from a Full install of Ubuntu 10.10, but when I boot from my vista CD and attempt the instalation it says I have to have my drive formated to NTFS, I have tried to google how to get this done.ied to go to ystem>Administration>Disk Utility and then edit the type of the partition but there are like 20 options and none of which are just NTFS. what should I do?
i am following the installation process and its very unclear whether or not a dual boot will occur and how i can make a partition of the free space available from my windows partition etc....i dont want to go through the process and find myself losing all my data and my windows partition i also cant seem to select a partition less than 86% of the total capacity of hdd so im def sure they're not taking my dual boot desires into consideration.
I just got a new laptop and am dual booting Windows 7 and Ubuntu 10.04. I tried mounting the Windows partition to access some files (such as documents), but they won't show up in Nautilus. I double checked their location from inside Windows, but they're not where they should be.
I have Ubuntu running on my PC but I want to install another operating system. The message I am not getting is that I cant install to a partition that is not formatted as NTFS. Do you know how I can reformat my partition to NTFS?
im looking for a command for mounting an ntfs partition. what i want to do is to put that command to the "after startup applications" option. that's because that ntfs partition is my storage partition, i play steam games [win7 dualboot, thats why that partition is ntfs], download movies etc. in my places menu, its called 190GB Filesystem, and when i click it, it mounts up. but that means i have to click it everytime i boot up, because vuze can't locate the files if it isnt mounted.
by the way : /media/7C1EE4E21EE49684 when its mounted
I have a 3T hitachi hard disk partitioned by Windows 7 and formatted as NTFS that I'm unable to mount under Ubuntu 11.04. The disk is in an external enclosure connected via USB2. Windows 7 has no problems seeing the partition and mounting the drive.
I have dual-boot XP/Karmic.I have an external HDD for backup. One partition is NTFS for the XP stuff. The second partition is ext4.I was practicing with the SystemRestoreCD, which provides a Linux root console.I can create and delete directories on the ext4 partition, but not on the NTFS partition. The error message says "read-only file system".I tried to use chmod and chown to change permissions and owner.I assumed that as root, I could do anything.How can I access the NTFS partition, and do anything that I need to do?All my current XP stuff on the HDD was backed up from within XP, using standard software (Cobian Backup), and normal user privileges. But I want to practice for when my XP OS is damaged.