I'm running ubuntu 9.10 64 bit on a Dell Latitude E6400 with the following configuration:
Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, 3MB L2 Cache 1066 MHz
Intel Graphics Media Accelerator x4500HD
250 GB Hard Drive SATA 7200RPM
I'm experiencing overheating problems, after just 15-20 minutes of minimal use (surfing the internet, not even watching flash vids or any other vids). The same laptop under Windows 7 64 bit stayed really cool.
I've read several posts here and followed this manual: [URL] to try to control the fans (I only installed the lm-sensors and ran the sensors command, I didn't do anything beyond that). Specifically what I did was install lm-sensors (via apt-get), ran sensors-detect which advised me to add the coretemp module to /etc/modules, which I did.
However when running sensors the only information I get is the overall temperature and the temperature of each of the cores.
why I'm not getting fan speed info when running sensors? Also is there a way to find out if more modules needs to be added to /etc/modules?
I can't for the life of me get the xsensors to work. I installed lm-sensors, the applet and also xsensors.I followed everything on this guide:URl... Went through it more than twice and a couple of restarts. I just can't figure out what's wrong.When I run "sensors" nothing is found. I ran the sensors configuration and it only found one device to add to /etc/modules. Please see the trace below, I would be very grateful if you can help me find the fix for this! The desktop is an HP Pavilion a730n with a Pentium4 processor.
Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
I would like to use lm-sensors with my new PC.With my old one lm-sensors showed all sensors of CPU, GPU, wattage and Fan.With the new AMD64 (kernel 2.6.32-5 on Debian Squeeze) I get only the temperature of the GPU and the HDD.The only found sensor is "Fintek F71882FG/F71883FG Super IO Sensors"No embedded "AMD [...] thermal sensors" found in sensors-detect How can I fix it?sensors-detect
So, now that I got http://bit.ly/h70Nnf sorted out, how come doesn't my Mobloquer show anything in the log. I'm used to Peer Guardian 2 in Windows and I know it has to show some more stuff than nothing.. Your help is sincerely appreciated cuz I'm so new to Ubuntu. FYI: Mobloquer and Peer Guardian 2 are IP blocking programs.
I an trying to install ubuntu onto my old Windows XP computer, I have burned the **** with the ISO files on it with a Mac and also tried using Windows 7, they have the files when I load them on those, but when I go to put the disk in my Windows XP computer it say's the disk is blank. I reboot my computer, and it doesn't try to install anything.
when I am having a conversation in empathy, I find that some messages people have sent me, don't arrive. Also the other way around: people don't receive messages I have sent them. I use ubuntu 10.04 now, but this also occurred to me in 9.10.
why the bootloader won't show up when I turn on the PC. The only things that come up with search results are 'Why ubuntu isn't on the boatloader' but my problem is is that the boot loader doesn't even SHOW UP.
Installation went completely fine, downloaded a version 10 32-bit iso file and then put in the folder with wibu and it asked me to restart. Restarted the PC, nothing came up so I thought you might have to restart again, restarted again, still no bootloader.
After looking in the 'Add/Remove Programs' of Windows it does say it's installed, so why the bootloader isn't showing up is rather mindbobbling.
I have a new netbook - "Eee PC 1005PE-PU27-BK" and installed Ubuntu Netbook Remix 10.04, Kernel Linux 2.6.32-24-generic. I love Ubuntu, but I also want to be able to access Windows 7 if I can. I've read some on GRUB, but the menu on startup isn't showing my Windows 7 instance. I've tried reinstalling GRUB, but when I run sudo update-grub, I still get this:
Code: Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-24-generic Found initrd image: /boot/initrd.img-2.6.32-24-generic Found linux image: /boot/vmlinuz-2.6.32-21-generic Found initrd image: /boot/initrd.img-2.6.32-21-generic Found memtest86+ image: /boot/memtest86+.bin done
I know that Windows 7 is still on the system, I just can't access it.
I'm facing a boring problem and I cant understand why it is happening. Im running Evolution 2.28.3 on Ubuntu 10.04, and all the messages are not showing their images. I already did the following confs:
1) Change proxy to connect "Directly to the internet" 2)In Preferences, "Load images from contacts". 3)I tried the option "Load Images" ou CTRL+I.
I've just upgraded to Maverick and as the Me menu works with Empathy I started to use it as my default IM client.
But no matter what I do, it won't show my picture.
I tried resizing the picture to 96x96, I tried to convert it from jpg to png. I tried uninstalling the program with apt-get remove --purge. I tried also removing the ~/config/Empathy directory and all others related to the program and then reinstalling it but nothing seems to work.
I even made a video aboout it, maybe I'm doing something wrong: [URL]
Nautlius doesn't show all the files that are in a folder From the screenshots below you can see that there are more files in the folder (ls from the terminal shows them all), however nautilus doesn't. Other .mkv files show up in other folders so its not that
I've tired turning off previews and that didn't work. Running nautilus as root didn't work either
I installed it from a cd and it wouldn't work. (froze in the process). I then tried to install it through windows wubi and that didn't work (wouldnt boot) since I was unaware it was a known issue and thought it was me doing something wrong I uninstalled it,reformatted the hard drive and tried to install via a cd again this time it fully iinstalled but when I rebooted it tells me unable to mount drives and a shell will be shown.
in the end I have no files on ubuntu so I would like to clean up all reminance of the previous installs and be able to use a working install. since I have been installing and reistalling for the better part of 8 hours.Yexcuse the post sloppiness using my phone)
I have maverick meerkat. I'm tryting to play a video but it has a VP7 codec and VLC will not play it. I installed mplayer but it doesnt show up in the sound and video menu options. I have Movie Player but not Mplayer Movie Player?
So, as the title says Windows 7 doesn't show up in GRUB2's selection menu, but it does show my Windows XP professional option that I had before Linux and then reinstalled. After searching very long for the problem in Linux and GRUB2 I decided to boot into XP, witch gave me the option for Windows 7 or older versions of Windows -> so I eventually can boot to it! So here is the real question: How can I make an entry for Windows 7 and for Windows XP? This is because I'd like to use a theme for GRUB and it would be to stupid to make GRUB look nice if I then come to a stupid screen of the Windows loader!
I am a beginner and just start with Zoneminder. I take Sony SNC RZ25P as webcamera. I have installed Ubuntu 10.04 LTS and Zoneminder v1.24.2. In its console, I configure HTTP mode and Remote host name 149.XXX.XXX.XXX but there is no picture shown and when I use probe in console,it reads "unable to probe network cameras status is 127".
I'm using a 64-bit release. But, my PC doesn't seem to show the full 4GB of RAM that is installed. It shows about 3.4 to 3.6GB of RAM (please see attached picture).I thought that if I could install a 64-bit OS that would mean that I have a 64-bit capable processor. I thought using a 64-bit release would show all 4GB or RAM on my PC. What am I doing wrong? My CPU is a Pentium 4 Prescott DT 630.
I recently installed Ubuntu 9.10 onto my second hard drive, and now I can't boot into Vista (installed on hard drive #1). Grub2 just doesn't seem to be recognizing that there is a Windows Vista installation on the first hard drive.
I followed this guide (with Fabien's changes) because it seemed like they were having the exact same problem. But after rebooting, Vista is still not showing in the GRUB menu. In fact, the GRUB menu doesn't even show up unless I press Shift because it thinks that Ubuntu is the only OS installed on my computer.
My results with boot_info_script:
Code: ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=e94a058d-1d19-4a98-924b-1a5fce405bdd)/boot/grub. => Windows is installed in the MBR of /dev/sdb sda1:
When I was installing Ubuntu to HD2 (the 500gb one), I got a peculiar message saying that Windows was installed on it. There wasn't anything on HD2 though, because Windows Vista was most definitely installed on HD1.
However, if I chose to overwrite HD1 with Ubuntu, the message wouldn't come up. It seemed like the installer was confused as to which hard drive actually held my Windows Vista install.
Trying this on a Lenovo with 10.04. but after a few updates and some basic software (restricted extras) the network manager is missing. I tried installing WICD but that doesn't show up either. Going to the startup applications, it is listed and checked, and dragging it to the panel works, but clicking it does nothing.
I have an iPhone 3GS with Firmware 3.1.3 and I'd like to sync the music over rhythmbox in lucid (64bit).
The phone does mount in nautilus and I can also mount it with ifuse to use it witz gtkpod. However it does not show up (it only blinks and disappears) in the list at the left in rhythmbox though I have MTP and iPod Plugins enabled.
I thought I'd ask after having waited several weeks and none of the gvfsd updates changed anything
After moving to Lucid Lynx, I've noticed, that when I view Folder Preferences, Nautilus no longer displays the free space available, but instead displays "Free space: Unknown".
In some cases it still appears to show the free space, for example when viewing properties of Home folder, or viewing the properties of a detachable HDD in media-folder (but not when trying to view the properties of any of the folders _on_ that HDD).
When I download a game from the Ubuntu Software manager, it doesn't show up in the applications. Is there another place where the files are located? And how can I execute them? I am trying to run Mednafen
I want to auto mount my ntfs partition using pysdm. However, it does not see it. When I do an fdisk -l it shows up. I can access the partition through my home folder... it just doesn't show up in pysdm. I have already tried to reinstall the program.
i just installed Ubuntu from an ISO about a year old and of course i updated it to the latest version and when i get that screen at startup where i have a choice of which version to load i get something like this: My current version, memtest, an old installation of Ubuntu and some really old versions. The problem is i also have Windows7 and Vista installed(vista really needs to go) but i don't have either of them as a choice in the bootloader. How do i get it back? Also before the update i had it on the list.
I have Ubuntu 10.04 installed on my G4 mirror tower. I have two DVD burners in my G4. When I go to open the DVD tray by pressing the eject key on my Apple keyboard, the tray opens and closes. It doesn't stay open. When I insert a CD or DVD, it doesn't show up on my computer. i have to restart my computer for it to show up in the Computer window. Also, when i eject a CD or DVD, I still see the contents of it on my computer even though the disk has been ejected. I pressed reload under the view menu and it still displays the contents.