just installed ubuntu10.04 has set monitor resolution to 800x600 i need 1920x1080 i have been at this for two days now and getting absolutely no where , i could set this on windows in 5 minutes , why does it need to be so hard on ubuntu, i really prefer ubuntu to windows but problems like this really can drive one to despair. i have tried so many different web sites and follow instructions but keep getting command not found which i dont understand why. here is an example of something i tried in terminal xrandr --output VGA --mode 1920�1080 --rate 50 i get warning: output VGA not found; ignoring.many other things i have tried come up with command not found .
I installed Nvidia 195 version from their site and installed as per their instruction. Now, on reboot the resolution gets "800*600" while it should be "1366*768". What should I do?
My screen resolution keeps reverting back to the default resolution 800x600. I'm using ubuntu 10.04, but had the same problem on 9.10 on my Acer Revo r3600 ION. I am able to change the resolution to 1280x1024 but have to do it by the nVidia configuration tool. The tool then allows me to 'Save to X Configuration'which it appears to have done successfully.See the sections from my 'etcx11xorg.conf' file. This is the state of the file after a reboot by the way.how I can get my desired resolution to persist after I reboot?
I have just bought a new Acer 23" 1920x1080 flatscreen. I used to have an old fashioned 1280x1024 flatscreen.Now the problem is, every single time when I log on Ubuntu resets my screen res. to 1280x1024. So every time I have to use the Nvidia Settings to set my screen res to 1920x1080 and every time I have to place my panel widgets back in the right place and order, because of that, which is quite annoying.GDM has no problems though, it always displays in the right resolution.I use a Nvidia GeForce 6200 graphics card and the nvidia-current driver on Ubuntu 10.04 i386. I cannot use the Gnome monitors manager to set my resolution. Every time it sends me to Nvidia Settings.This is my Xorg.conf;
Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
After login I get the blue desktop with the swirly art thing but I don't have a starting point to be able to do anything and think screen resolution may be the issue. How do I resolve that?
on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
Whenever I restart my system, the screen resolution has been reset to 1600 x 1200. I change it in "configure desktop" and it's ok for the session but it changes back on reboot. Also, the font sizes are too small for xterms. Sure, I can ctrl+ to increase but why should I have to do this each time I login? I noticed others seem to be having this problem. Is there an upgrade that will fix this? I'm using 11.2 and kde.
So I know now that I reach the login screen, and I know to hit control, alt, f1. However, all attempts to reset the resolution have failed. Here's how it went down. I was working with nvidia driver. Already was frustrated I couldn't get a working wide screen setting for my toshiba hd tv/monitor but that's a seperate issue. I was trying to get the driver to recognize my separate monitor to an hd tv in the living room using the video out. works fine with windows. I got it to recognize, it made me save settings, and then restart. Note resolution settings are set to automatic right now. Then when I restart, I get to ubuntu splash screen, it plays the chime, and shows a blank black screen. Control alt f1 brings me the menu.
I have been told to type (this is just quick type, I used the proper commands in reality) sudo dpkg-reconfigure xserver-xorg. sudo dpkg-reconfigure -phighxserver - xorg xrandr --output lvds --mode 1024x768
I found one article that gave a three step process. sudo cp /etc/x11/xorg.conf / etc/x11/xorg.conf.custom sudo sh -c 'md5sum ' etc'/x11/xorg.conf > /var/lib/x11/xorg.conf.md5sum' sudo dpk-reconfigure xserver-xorg.
Nothing gave me any of the results I expected from command doesn't exist to completely irrelevant menus. Start me from the beginning to what I should do. Yes I logged in properly with my username and password to. Do the 'etc' in the command need to be filled with something else like a drive letter or something. I'm so lost, should I disconnect my tv? Also I tried running in safe mode and it said something about display not found.
Whenever I change my Display and Monitor settings. The settings keep getting reset every time I restart KDE. The changes work fine and as expected, they just keep getting wiped every time for some reason.Here is what the settings look like after each restart:And here is what I'm trying to modify them t
I'm a relatively new Debian user, having come from Ubuntu. I recently bought a Dell micro-server to function as my Kodi media player. I installed an nVidia GeForce 210 to output to my Pioneer home theatre amplifier. The amp takes all my inputs (eg. Satellite set-top decoder, PS3, Kodi etc) and outputs to the TV. I installed XFCE as my desktop environment so that I could still interact with it via VNC.
Everything is working great except for one exceptionally annoying problem! Every day, I find that I am having to VNC into the desktop, load up nVidia X Settings, and change my screen resolution from Auto to 1920x1080 because it has lost the display configuration and the screen is blank. I presume this happens when the amplifier switches from one input to the next. It doesn't matter if I save the configuration to my X11.conf file or not - it still resets itself.
Before, this setup would run for months without any intervention (Same amplifier + HP microserver + Ubuntu + LXDE + ATI video card), so I'm pretty confident that the issue is either Debian, XFCE, or the nVidia card.
I have a laptop with an "ATI Technologies Inc Mobility Radeon HD 3400 Series" video device. I have trouble configuring the second VGA monitor attached to the laptop to 1024x768 resolution. It is always stuck on 2560x800. My xorg.conf file is as follows:
Just installed 11.04 on a box that it is on a kvm switch. As long as the switch is connecting the monitor to the booting Ubuntu box, the resolution of the monitor is detected OK. However, if for some reason I am working on a different box and the KVM switch is routing K V and M inputs to the other box, then Ubuntu defaults to what seems a botched VGA setting (i.e. it chops off top and left sections of the display).While in this "VGA" mode if I log out and log in, it re-detects the resolution ok.Is there any way to force Ubuntu to use a specific resolution no matter what? In this way, if I am working on a different box while waiting for Ubuntu to load, when I switch the resolution will be OK.I tried the only thing I can think of and this is to set the "good" resolution as "default" for "all" monitors, but it has no effect.
I was playing around with the NVidia settings control panel today and I saw that its Resolution dropdown was giving me options for
1680*1050 1920*1080
My monitor supports up to 1440*900. When I selected one of the higher resolutions, it didn't look very sharp, and the text was somewhat fuzzy and lacked clarity. Was this rendering being done by the graphics card but 'compressed' by the monitor?
The status said 'switched to metamode'. I tried searching but found nothing - what exactly does MetaMode mean? I'm more interested in understanding what was happening, only experimenting with the higher resolutions. What monitor and resolution do you have?
why both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
so when ppl bring me their computer and i install them ubuntu in my monitor when they take their computer to their home ubuntu does not keep the screen resolution i set for them.
I have an asus eee pc with a 7 inch screen. the screen is small and today I attached a 15 inch dell monitor to increase the screen size. the dell monitor is displaying a 720x 400 resolution which results in a very large screen but no more space on the screen. I can select 1024x768 resolution in system,preferences, display. HOWEVER I cannot select APPLY to this resolution because the apply button is not visable on the bottom of the screen because the display is SOOOO big.
I have a 30" apple cinema display. The monitor handles up to 2560 x 1600 pixels which is the optimum resolution for this monitor. I found out that most apple monitors have nvidia graphic card.The monitor is hooked up to a motherboard Intel BOXDG45FC. This motherboard has Onboard Video Chipset Intel GMA 4500. However, using KDE interface I dont get beyond 1280x800 resolution for the monitor.How can I get the maximum resolution for the monitor?
I just switch from windows to use ubuntu 10.04. I am still learning how to set things in ubuntu. One of the problem is that I can't set my secondary (external) display to my favorite one. I have 22'' screen (max 1680x1050) but I love to set it to 1280x800. I follow instruction from this website https://wiki.ubuntu.com/X/Config/Resolution and my display detail is like this code...
Somehow, I get the new mode in LVDS1 but not in VGA1. How could I add this new mode in VGA1?
I have been using Ubuntu for a couple of years and always at the 1024 768 screen resolution.
I just finished installing version 10.04. It defaulted to 1280 1024.
I much prefer the 1024 768 because it is better for my older eyes, but when I attempt to change, the screen goes black for a minute and then stays at 1280 1024.
Since earlier versions of Ubuntu did it, this should also, but..
I just switched monitors to a Viewsonic VX2025 and I am unable to get beyond 1280 x 1024 using the nvidia x server settings. My graphics card is a GeForce 5200. These are connected with a DVI plug. I would like to be able to set my resolution to 1920 x 1080. (Also, the card and monitor worked at 1920 x 1080 in a previous windows machine.)
I have done a fair bit of searching and it appears that my issue is either the x configuration file or EDID. After 2 days of working with this it's gotten confusing to say the least. So, I'm looking to see if others have had a similar problem and how to solve it. I have not altered an x config file before, so not exactly sure of where to begin.
The image on my external monitor is blurry. the resolution is right, but the Monitors menu shows the monitor to be a 20" while it is actually a 19". So this may be a hint. I would like to know how to adjust the monitor size (if possible). How can this be done? I am running 10.4 on a dell precision 4400, connecting with the monitor via VGA.
I'm not sure if this is the right category to ask for help but here it goes:I have a laptop with ubuntu 10.04x64 and i have bought recently a samsung xl2370 which has a max resolution of 1080p but the maximum resolution my laptop recognizes is 1440x900 is there any way to solve this?
Sometimes, randomly, when turning on my Ubuntu laptop (HP 6730b, Ubuntu 10.04) I get a wrong monitor setting (much lower resolution than normal) and it is not possible to set it correctly because the menu buttons are wrongly placed and some are not present (probably there is not enough room for them) I have no other way than to restart the system to get the right resolution. Can someone tell me this inexplicable (to me) behaviour? Of course I didn't change anything in monitor settings...
Ubuntu Desktop 10.10 boots with disconnected monitor with a screen resolution of 1024x786 ... which in fact is great - other distributions won't even boot ...
How can I change this resolution? ... cause I'am operating my system via VNC and preferably set it to something higher.
Installed server 10.04 using an old Sony 19" multi scan 400ps CRT monitor. The command line font is less than 1/8" high: something on the order of a large 4pt or small 5pt font. Made several attempts to locate the correct info using the man functions and searching the archives, but so far have not been unable to find the needed information. The eye strain is about to make me eligible for a white cane with a red tip.
i'm trying to set the resolution to 1440 x 900 on ubuntu manually since it's not being showed under the options. I've followed this tutorial [URL] The problem is that i don't have the output name to add on this command (as you can see below under the xrandr command.:
xrandr --addmode XXXXX 1440x900 xrandr Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm
I have a old Pentium III box with equally old monitor (It says LG Sutdioworks 45v).I have installed Ubuntu 10.04 LTS.I have found it difficult to setup my screen resolution. It shows by default 800x600.After some tweaking I can stretch upto 832x624.I have seen resolution up to 1024x768 in windows on the same box and same monitor.How can I improve the resolution?I have searched and found out that i need a xorg.conf setup as Ubuntu cant identify my monitor properly.I also installed ddcprobe, read-edid.However I have met with limited success.
I have a problem with my graphics (exactly this one: [URL] I've got an Intel 845G chipset and a LG Flatron F900P monitor.A friend of mine convinced me to try ubuntu and I installed the 10.10 version. Everything (except the monitor's resolution) works all right.
My computer is: IBM Net Vista 8305-21G Chipset: FRU PN 49P1599 (Intel 845G)
